SCHURTER 1070.0048.04

PenMount 6500 combo board, USB and RS232 Interface
PenMount 6500, one of PenMount’s newest innovation, the ultimate combo board. A collectively
integrated features and functions of auto detecting USB and RS232 serial interfaces supporting
4, 5 & 8 wire resistive touch screens; complemented by the superbly developed PenMount drivers with auto installation driver capability.
PenMount 6500 control board using PenMount 6000 controller that has been designed for those
who may like and all-in-one solution with 10-bit A/D converter built-in to make the total printed circuit board denser, circuit diagram also designed for 12-bit ADC for optional. There are two connectors on this board, one connector is for 4, 5, 8-wire touch screen cable (optional), and another
is for 4-pin USB A type cable.
Electrical Specifications
Touch Screen:
For 4-, 5-, 8-wire analog resistive type
Communications:
USB, full speed, 12MHz
RS232, 19200 / 9600 baud rate
Touch Screen Controller:
PenMount 6000 microcontroller
Resolution:
2048x2048 (optional up to 4096 x 4096)
Size:
60x26 mm, two 3mm Ø screw holes
Portrait:
Support 90° 180° and 270° screen rotation
Calibration data:
data saved into Chip and also into register file
Diagnostic:
Operating Voltage
LED on board
+5V DC for USB / +5V~12V DC for RS232
(4/8-wire touch panel use for 5V to 12V DC
5-wire touch panel only use for 5V DC)
Storage Temperature Range
-40°C ~ 85°C
Operating Temperature
-20°C ~ 70°C
Changes that contribute to technical improvement are subject to alternations
2007
Bearb.
Gepr.
Vert.
Datum
05.04.
05.04.
Name
Maurer
Maurer
Touch Controller Board
USB & RS232
4-, 5-, 8-wire
SPEZIFICATIONS
EDV-Datasheet
PenMount 6500 combo
don’t change manually
Manufactured by Apex Material Technology Corp.
H
Zu Änd.
Datum
Name
D 79346 Endingen
1070,0048.01-.04
page 1 of 3
Index:
Driver Software
Windows 2000/XPE/2003 and newest released version, Windows XP (WHQL), WinCE 4.2/5.0 (for X86,
Armv4, Armv4i, MIPS, SH3, SH4 Platform), Linux OS (supported X-Windows mode and up to kernel 2.6)
Actual driver overview and download:
http://www.amtouch.com.tw/downloads/drivers.htm
http://www.penmount.com.tw/down_2_1.php
Mechanical Size
DIP Switch & Connector Definition
DIP Switch and Pin definitions for the two connectors on the PenMount 6500 control board:
DIP Switch Setting
Switch
S1
S2
S3
S4
Definition
Touch screen type
PnP enable or disable
Baud Rate Adjustment
Reserved
ON
4-, 8-wire
Enable*
9600
Reserved
OFF
5-wire
Disable
19200*
Reserved
*Default
Changes that contribute to technical improvement are subject to alternations
2007
Bearb.
Gepr.
Vert.
Datum
05.04.
05.04.
Name
Maurer
Maurer
Touch Controller Board
USB & RS232
4-, 5-, 8-wire
SPEZIFICATIONS
EDV-Datasheet
PenMount 6500 combo
don’t change manually
Manufactured by Apex Material Technology Corp.
H
Zu Änd.
Datum
Name
D 79346 Endingen
1070,0048.01-.04
page 2 of 3
Index:
Connector Pin Definitions for Touch Screen
Pin Definition
/ wires
4-wire
5-wire
touch screen touch screen
8-wire
touch screen
PIN 1
Ground
Ground
Ground
PIN 2
Top
UL
Top
PIN 3
Bottom
UR
Bottom
PIN 4
Left
LL
Left
PIN 5
Right
LR
Right
PIN 6
---
Sense
Top Sense
PIN 7
---
---
Bottom Sense
PIN 8
---
---
Left Sense
PIN 9
---
---
Right Sense
Connector Pin Definitions for USB
USB Interface
Pin #
PIN 1
PIN 2
PIN 3
PIN 4
Definition
Ground
D+
D-
Vcc
Connector Pin Definitions for Power and RS-232
Power Lines
RS-232 Interface
Pin #
PIN 1
PIN 2
PIN 3
PIN 4
PIN 5
PIN 6
Definition
Ground
5V~12V power
RTS
TXD
RXD
Ground
Item Number
1070. 0048.01
cable set 4-wire ZIF
USB cable 1500mm
1070. 0048.02
cable set 4-wire AMPC
USB cable 1500mm
1070. 0048.03
cable set 8-wire AMPC
USB cable 1500mm
1070. 0048.04
cable set 5-wire AMPC
USB cable 1500mm
1070. 0048.11
cable set 4-wire ZIF
RS232 cable 450mm
1070. 0048.12
cable set 4-wire AMPC
RS232 cable 450mm
1070. 0048.13
cable set 8-wire AMPC
RS232 cable 450mm
1070. 0048.14
cable set 5-wire AMPC
RS232 cable 450mm
Changes that contribute to technical improvement are subject to alternations
2007
Bearb.
Gepr.
Vert.
Datum
05.04.
05.04.
Name
Maurer
Maurer
Touch Controller Board
USB & RS232
4-, 5-, 8-wire
SPEZIFICATIONS
EDV-Datasheet
PenMount 6500 combo
don’t change manually
Manufactured by Apex Material Technology Corp.
H
Zu Änd.
Datum
Name
D 79346 Endingen
1070,0048.01-.04
page 3 of 3
Index: