PC517 Automotive Subminiature PCB Power Relay FEATURES 15 Amp continuous current capacity Up to 60 amp switching capacity Six different contact forms Four different contact materials available Designed for high inrush applications UL Class F insulation standard Dust cover or sealed version available CONTACT RATINGS Max Switching Current 1 Form C (DPDT) NO NC 1 Form U 1 Form V 1 Form W (SPDT-DB-DM) NO NC (SPST-NO-DM) (SPST-NC-DB) 1 Form A (SPST NO) 1 Form B (SPST NC) Make 60 Amps 12 Amps Motor 20 Amps 10 Amps 20 Amps 10 Amps 2 X 20 Amps 2 X 7 Amps 2 X 15 Amps 2 X 5 Amps 15 Amps 10 Amps 15 Amps 10 Amps 2 X 10 Amps 2 X 7 Amps 2 X 5 Amps Form Max. Continuous Current 60 Amps Minimum Load 12 Amps 2 X 40 Amps 2 X 8 Amps 2 X 30 Amps 2 X 7 Amps 2 X 5 Amps .05 Amps @ 5 VDC See curve page 2, current dependant Max. Switching Voltage CONTACT DATA AgNiO 15 (Silver Nickel Oxide 15%), AgSnOInO (Silver Tin Oxide Indium Oxide) Material 100 milliohms max @ 0.1A, 6VDC Initial Contact Resistance Service Life Mechanical 1 X 10 7 Operations Electrical 2 X 10 5 Operations CHARACTERISTICS Operate Time 3 ms. typical Release Time 1.5 ms. typical Insulation Resistance 100 megohms min, at 500VDC, 50%RH Dielectric Strength 500 Vrms, 1 min. between coil and contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5 mm, 20 - 200 Hz functional Drop Resistance 1 Meter height drop on concrete in final enclosure Power Consumption 1.1 W approx. Ambient Temperature Range -40 to 85 degrees C operating, -40 to 155 storage Weight Open: 8 grams; Enclosed: 12 grams approx. COIL DATA Coil Voltage Resistance Must Operate Voltage Max. (VDC) Allowable Must Release Voltage Min. (VDC) ohms + 10% A, B, C, U, V W Voltage Max (VDC) 28 130 3.75 4.5 8 0.35 0.7 12 7.50 9.0 16 0.70 1.4 24 520 15.0 18.0 31 1.40 2.8 6 B, V A, C, U, W 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PC517 Rev B 4-14-04 PAGE 1 PC517 PC517 REFERENCE CURVES ORDERING INFORMATION Example: -1C PC517 -12 S T Model Contact Form 1A, 1B, 1C, 1U, 1V or 1W Coil Voltage Enclosure Nil: Open Frame; S: Sealed; C: Dust Cover Contact Material Nil: AgSnO; C: AgCdO; T: AgSnOInO Dimensions in Inches (millimeters) drawings are 2 X scale Bottom View Side View End View PC Board Layout .598 .697 (17.7) (15.2) .070 (1.8) .40 (10.16) .776 (19.7) .35 (8.89) .138 (3.5) 1 Form A 1 Form b 1 Form C 1 Form U 1 Form V .15 (3.81) 1 Form W Notes: Contact Form W shown On other contact forms Unused Pins are Omitted Maximum make current refers to inruch current of a lamp load Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2