Part Number: ZVG88W 3.2x1.0mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com Features z3.2mmx1.0mm RIGHT ANGLE SMT LED, 1.5mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE : 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) VG (InGaAlP) Unit Operating Characteristics (TA=25°C) VG (InGaAlP) Unit Reverse Voltage VR 5 V Forward Voltage (Typ.) (IF=20mA) VF 2.1 V Forward Current IF 30 mA VF 2.5 V Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width Forward Voltage (Max.) (IF=20mA) iFS 150 mA Reverse Current (Max.) (VR=5V) IR 10 uA Power Dissipation PT 75 mW λP 574 nm Operating Temperature TA -40 ~ +85 Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 15 pF °C Storage Temperature Part Number ZVG88W Tstg Emitting Color Green Published Date : FEB 26, 2008 -40 ~ +85 Emitting Material InGaAlP Luminous Intensity (IF=20mA) mcd Lens-color min. typ. 18 59 Water Clear Drawing No : SDSA4493 V4 Wavelength nm λP Viewing Angle 2 θ 1/2 574 120° Checked : B.L.LIU P.1/4 Part Number: ZVG88W 3.2x1.0mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com VG Published Date : FEB 26, 2008 Drawing No : SDSA4493 V4 Checked : B.L.LIU P.2/4 Part Number: ZVG88W 3.2x1.0mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 26, 2008 Drawing No : SDSA4493 V4 Checked : B.L.LIU P.3/4 Part Number: 3.2x1.0mm RIGHT ANGLE SMD CHIP LED LAMP www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 26, 2008 ZVG88W Drawing No : SDSA4493 ZVG88W V4 Checked : B.L.LIU P.4/4