Part Number: ZMDK53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com Features z1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). Operating Characteristics (TA=25°C) 2. Tolerance is ± 0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength Of Peak Emission (Typ.) (IF=20mA) λP 650 nm Wavelength Of Dominant Emission (Typ.) (IF=20mA) λD 635 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 pF IF 30 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 185 mA Power Dissipation PT 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Published Date : FEB 28,2008 V 2.5 Forward Current Red 1.95 VF V ZMDK53W VF Forward Voltage (Max.) (IF=20mA) 5 Emitting Color Forward Voltage (Typ.) (IF=20mA) Unit VR Part Number Unit MDK (InGaAlP) Reverse Voltage Storage Temperature MDK (InGaAlP) Emitting Material InGaAlP °C Luminous Intensity (IF=20mA) mcd Lens-color min. typ. 50 148 Water Clear Drawing No : SDSA2388 V7 Wavelength nm λP Viewing Angle 2 θ 1/2 650 120° Checked : B.L.LIU P.1/4 Part Number: ZMDK53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com MDK Published Date : FEB 28,2008 Drawing No : SDSA2388 V7 Checked : B.L.LIU P.2/4 Part Number: ZMDK53W 1.6x0.8mm SMD CHIP LED LAMP www.SunLED.com Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 28,2008 Drawing No : SDSA2388 V7 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com PACKING & LABEL SPECIFICATIONS Published Date : FEB 28,2008 ZMDK53W 1.6x0.8mm SMD CHIP LED LAMP Drawing No : SDSA2388 ZMDK53W V7 Checked : B.L.LIU P.4/4