ZMDKVG59W-1 Part Number: www.SunLED.com 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Features z 1.6mmx1.5mm SMT LED, 0.7mm THICKNESS. z LOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. z IDEAL FOR BACKLIGHT AND INDICATOR. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 2000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) MDK VG (InGaA Unit (InGaAlP) lP) Reverse Voltage VR 5 5 V Forward Current IF 30 30 mA Forward Current (Peak) 1/10Duty Cycle 0.1ms Pulse Width iFS 185 150 mA Power Dissipation PT 75 75 mW Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number ZMDKVG59W-1 Emitting Color Emitting Material Red InGaAlP Green InGaAlP Published Date : FEB 25, 2008 °C Operating Characteristics (TA=25°C) Drawing No : SDSA1786 VG Unit (InGaAlP) Forward Voltage (Typ.) (IF=20mA) VF 1.95 2.1 V Forward Voltage (Max.) (IF=20mA) VF 2.5 2.5 V Reverse Current (Max.) (VR=5V) IR 10 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) λP 650 574 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 635 570 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 28 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 35 15 pF Luminous Intensity (IF=20mA) mcd Lens-color Water Clear MDK (InGaA lP) Wavelength nm λP min. typ. 70 148 650 18 49 574 V3 Checked : B.L.LIU Viewing Angle 2 θ 1/2 120° P.1/5 Part Number: www.SunLED.com ZMDKVG59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP MDK Published Date : FEB 25, 2008 Drawing No : SDSA1786 V3 Checked : B.L.LIU P.2/5 Part Number: www.SunLED.com ZMDKVG59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP VG Published Date : FEB 25, 2008 Drawing No : SDSA1786 V3 Checked : B.L.LIU P.3/5 Part Number: www.SunLED.com ZMDKVG59W-1 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) The device has a single mounting surface. The device must be mounted according to the specifications. Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : FEB 25, 2008 Drawing No : SDSA1786 V3 Checked : B.L.LIU P.4/5 Part Number: www.SunLED.com 1.6x1.5mm BI-COLOR SMD CHIP LED LAMP PACKING & LABEL SPECIFICATIONS Published Date : FEB 25, 2008 ZMDKVG59W-1 Drawing No : SDSA1786 ZMDKVG59W-1 V3 Checked : B.L.LIU P.5/5