T-1 3/4 (5mm) BI-COLOR INDICATOR LAMP WP59SURKMGKW Features HYPER RED MEGA GREEN Description UNIFORM LIGHT OUTPUT. The Hyper Red source color devices are made with DH LOW POWER CONSUMPTION. InGaAlP on GaAs substrate Light Emitting Diode. 3 LEADS WITH ONE COMMON LEAD. The Mega Green source color devices are made with DH I.C. COMPATIBLE. InGaAlP on GaAs substrate Light Emitting Diode. LONG LIFE - SOLID STATE RELIABILITY. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2655 REV NO: V.1 DATE: APR/19/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005960 Selection Guide Part No. Dice Iv (mcd) @ 20mA Lens Type Min. Typ. 280 700 50 170 HYPER RED (InGaAIP) WP59SURKMGKW Viewing Angle WHITE DIFFUSED MEGA GREEN (InGaAIP) 2 θ 1/2 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Mega Green λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Mega Green 635 570 nm IF=20mA Spectral Line Half-width Hyper Red Mega Green 28 20 nm IF=20mA C Capacitance Hyper Red Mega Green 35 15 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red Mega Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current All 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Mega Green Units Power dissipation 170 105 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA 5 5 V Reverse Voltage Operating/storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2655 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005960 WP59SURKMGKW Hyper Red SPEC NO: DSAF2655 REV NO: V.1 DATE: APR/19/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005960 Mega Green SPEC NO: DSAF2655 REV NO: V.1 DATE: APR/19/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005960 PACKING & LABEL SPECIFICATIONS WP59SURKMGKW Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2655 REV NO: V.1 DATE: APR/19/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1101005960