5.0mm x 6.0mm FULL COLOR LED LAMP Part Number: AAF5060PBESURVGA PRELIMINARY SPEC ATTENTION Blue Hyper Red Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Outstanding material efficiency. The Blue source color devices are made with InGaN on SiC z Reliable and rugged. Light Emitting Diode. z Water clear lens. The Hyper Red source color devices are made with In- z Low power consumption. GaAlP on GaAs substrate Light Emitting Diode. z One blue, one red and one green chips in The Green source color devices are made with InGaN on GSiC Light Emitting Diode. one package. z Can produce any color in visible spectrum,including Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic white light. z Moisture sensitivity level : level 4. glove when handling the LEDs. z RoHS compliant. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007 Selection Guide Part No. Dice Lens Type Blue (InGaN) AAF5060PBESURVGA WATER CLEAR Hyper Red (InGaAlP) Green (InGaN) Iv (mcd) [2] @ 30mA*50mA Min. Typ. 180 300 *380 *500 180 350 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 50mA; Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 640 520 nm IF=20mA Blue Hyper Red Green 470 628 525 nm IF=20mA Spectral Line Half-width Blue Hyper Red Green 21 27 35 nm IF=20mA C Capacitance Blue Hyper Red Green 100 45 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red Green 3.2 1.9 3.2 4 2.5 4 V IF=20mA IR Reverse Current Blue Hyper Red Green 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Power dissipation [1] Hyper Red Green Units mW 350 DC Forward Current 30 50 30 mA Peak Forward Current [2] 100 185 100 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [3] 260°C For 3 Seconds Lead Solder Temperature [4] 260°C For 5 Seconds V Notes: 1. Within 350mW at all chips are lightened. 2.1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007 AAF5060PBESURVGA Blue SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007 Hyper Red SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007 Green SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007 PACKING & LABEL SPECIFICATIONS AAF5060PBESURVGA SPEC NO: DSAG5859 REV NO: V.2 DATE: JAN/07/2009 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1201100007