DC/DC Converters
TSH Series, 2 Watt
RoHS
compliant
Features
◆ Ultra compact SMD Package (SOIC-14/18)
◆ Isolated single and dual Output Models
◆ I/O-Isolation 1‘000 VDC
◆ High Efficiency up to 82%
◆ Operating Temperature –40°C to +85°C
◆ Reflow Solder Temperature up to 245°C
◆ High Accuracy of Pin Co-Planarity
◆ Available in Tape and Reel Package
◆ Lead free Design, RoHS compliant
◆ 3 Year Product Warranty
The TSH series are ultra miniature, isolated 2 Watt DC/DC-converters in SMD package. The devices can be soldered without any problems in a high temperature
lead free solder process. Requiring only 1.5 cm2 board space they offer the ideal
solution in many space critical applications. These converters are the ideal solution
for point of load power conversion, ground loop elimination, noise reduction and
digital interface applications.
Models
Ordercode
Input voltage
TSH 0505S
Output voltage
Output current max.
Efficiency typ.
400 mA
77 %
5 VDC
12 VDC
165 mA
81 %
±5 VDC
± 200 mA
77 %
TSH 0512D
±12 VDC
± 80 mA
79 %
TSH 0515D
±15 VDC
± 65 mA
79 %
TSH 1205S
5 VDC
400 mA
78 %
TSH 1212S
12 VDC
165 mA
82 %
±12 VDC
± 80 mA
82 %
TSH 1215D
±15 VDC
± 65 mA
82 %
TSH 2405S
5 VDC
400 mA
78 %
TSH 0512S
TSH 0505D
TSH 1212D
TSH 2412S
TSH 2412D
TSH 2415D
http://www.tracopower.com
5 VDC ±10%
12 VDC ±10%
24 VDC ±10%
12 VDC
165 mA
81 %
±12 VDC
± 80 mA
81 %
±15 VDC
± 65 mA
82 %
Page of 4
DC/DC Converters
TSH Series
2 Watt
Input Specifications
Input current no load /full load 5 Vin models: 60 mA / 500 mA typ.
12 Vin models: 30 mA / 200 mA typ.
24 Vin models: 15 mA / 100 mA typ.
Surge voltage (1 sec. max.) 5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse polarity protection 0.3 A max.
Reflected input ripple current can be reduced by ext. 1–3.3 µF polyester film
capacitor
Input filter internal capacitors
Output Specifications
Voltage set accuracy ± 4 % max
Voltage balance (dual output models) ± 1 % max.
Regulation
– Input variation 1.2 % / 1% change Vin
– Load variation 20 – 100 % 10 % max.
Ripple and noise (20 MHz Bandwidth) 75 mV pk-pk max.
Temperature coefficient ± 0.02 %/K
Short circuit protection limited 1 sec. max.
Capacitive load
5 VDC single output models:
5 VDC dual output model:
12 VDC single output models:
12/15 VDC dual output models:
47 µF max.
10 µF max.
10 µF max.
4.7 µF max.
General Specifications
Temperature ranges
– Operating –40 °C ... +85 °C (no derating)
– Case temperature +95 °C max.
– Storage –55 °C ... +125 °C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217E ground benign) >2’000’000 h @ 25 °C
Isolation voltage (60 sec.)
– Input/Output 1‘000 VDC
Isolation capacity
– Input/Output 60 pF typ.
Isolation resistance
– Input/Output >1‘000 Mohm (at 500VDC)
Switching frequency 100 kHz typ. (frequency modulation)
Frequency change over line and load ± 30% max.
Physical Specifications
Case material non conductive black plastic (UL 94-V0 rated)
Package weight
single output models: 1.5 g (0.08 oz)
dual output models: 2.2 g (0.05 oz)
Lead-free reflow solder process as per IPC/JEDEC J-STD-020C
peak temp. 245°C (20 sec. max.)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page of 4
DC/DC Converters
TSH Series
2 Watt
Outline Dimensions
(0.35)
Single Output Models
2.54
5.08
(0.10)
(0.10)
(0.10)
12.7
8.6
(0.01)
2.54
0.25
8.9
S
(0.50)
(0.39)
11.8
(0.46)
Pin-Out
0-4˚
(0.34)
10.0
0.15
0.6
(0.02)
1.2
8
1.8
7
Single
1
–Vin (GND)
3
+Vin (Vcc)
7
–Vout
8
+Vout
14
No con.
(0.50)
3
12.7
1
9.3
Top fiew
(0.07)
(0.05)
(0.37)
14
Pin
2.54
2.54
5.08
(0.10)
(0.10)
(0.10)
(0.35)
Dual Output Models
2.54
5.08
2.54
(0.10)
(0.10)
(0.10)
15.3
(0.01)
2.6
(0.11)
0.25
8.9
S
8.6
(0.6)
10.0
(0.39)
11.8
(0.46)
0.15
0.6
18
12
1.2
1.8
7
9
http://www.tracopower.com
Pin
Dual
1
–Vin (GND)
3
+Vin (Vcc)
7
Common
9
–Vout
12
+Vout
18
No con.
(0.50)
3
12.7
1
(0.07)
9.3
(0.37)
(0.05)
Top fiew
Pin-Out
0-4˚
(0.34)
2.54
2.54
5.08
2.54
(0.10)
(0.10)
(0.10)
(0.10)
Dimensions in [mm], () = Inches
Tolerances ±0.25 (0.01), pins ±0.05 (0.002)
Page of 4
DC/DC Converters
TSH Series
2 Watt
Packaging: Single Output Models
Standard Packaging - Tube
175.0 { 2.0
14.2
10.2
9.7
10.5
- 1 Tube contains 10 converters
7.0
0.8
2.9
3.7
R0.7
3.6
29.0
Optional Packaging - Tape & Reel
+1
2.0 -0
- Specifications according IEC 286-3
- 1 Reel contains 350 Converters
13.0 { 0.25
100.0
0.5 { 0.05
A
3.5
1.7
2.0
B
20.0
6.3
50
13.0
11.5
24.0 { 0.03
1.75
4.0
1.
5 +
-0 0.1
330.0
- Use appendix «-TR» on order code
B
A
9.5
SECTION A-A
SECTION B-B
0.6
3.5
10
1.5
8.5
2.0
9.55
12.55
Dimensions in [mm], Tolerance ±0.1mm
http://www.tracopower.com
Page of 4
DC/DC Converters
TSH Series
2 Watt
Packaging: Dual Output Models
Standard Packaging - Tube
175.0 { 2.0
14.2
10.2
9.7
10.5
1 Tube contains 10 Converters
7.0
3.6
0.8
2.9
3.7
R0.7
2.0
Optional Packaging - Tape & Reel
+1
-0
37.0
- Specifications according IEC 286-3
- 1 Reel contains 350 Converters
100.0
13.0 ± 0.25
0.5 { 0.05
2.0
A
M
SECTION B-B
SECTION A-A
50
0.6
0.2
3.5
R0
.7
5
10
4.0
9.5
A
10
4.45
15.5
B
20.0
1.7
B
50
28.5
32.0{ 0.3
14.2
1.7
1.75
4.0
1. +
5 0
-0 .1
330.0
- Use appendix «-TR» on order code
8.55
1.5
9.55
2.0
M: partial enlargement
12.55
Specifications can be changed any time without notice
Dimensions in [mm], Tolerance ±0.1mm
Rev. 01/07
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com
Page of 4