Solid State Devices, Inc. SDR526 thru SDR529 SDR526SMS thru SDR529SMS 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3 AMPS 600 – 900 VOLTS 35 nsec HYPER FAST RECTIFIER Designer’s Data Sheet • • • • • • • • FEATURES: Hyper Fast Recovery: 35 nsec maximum PIV up to 900 Volts Avalanche Breakdown Hermetically Sealed For High Efficiency High Voltage Applications Single Chip Construction Metallurgically Bonded TX, TXV, and Space Level Screening Available Axial MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage @ 50µA SDR526 SDR527 SDR528 SDR529 Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, T A=25oC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, allow junction to reach equilibrium between pulses, T A=25oC) Operating and Storage Temperature Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Surface Mount Square Tab (SMS) Symbol Value Units V RRM V RWM VR 600 700 800 900 Volts IO 3 Amps IFSM 75 Amps TOP & Tstg -65 to +175 RθJL RθJE 20 10 DATA SHEET #: RC0049D o C o C/W DOC Solid State Devices, Inc. SDR526 thru SDR529 SDR526SMS thru SDR529SMS 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Min Max Unit Instantaneous Forward Voltage Drop (IF = 3 ADC, 300 - 500µsec Pulse) T A = 25oC T A = -55oC V F1 V F2 –– –– 2.50 2.50 Volts Volts Reverse Leakage Current (Rated VR, 300µsec minimum pulse) T A = 25oC T A = 100oC IR1 IR2 –– –– 50 250 µA µA Junction Capacitance (VR = 10 VDC, T A = 25oC, f = 1 MHz) CJ –– 50 pF Reverse Recovery Time (IF = 500 mA, IR = 1 A, IRR = 250 mA, T A = 25oC) trr –– 35 ns Case Outline: (Axial) Case Outline: (SMS) DIM MIN MAX A B C D 0.140” 0.170” 0.046” 1.00” 0.180” 0.230” 0.053” –– DIM MIN MAX A B C D 0.170” 0.220” 0.020” 0.002” 0.180” 0.280” 0.030” –– Note: Dimensions prior to soldering. NOTES: Consult manufacturing for operating curves.