RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz Features • • • • • • • • • • MASWSS0093 V2 Functional Schematic UNII, Hiperlan, and 802.11a+b/g Applications Broadband Performance: DC-6 GHz Low Insertion Loss: 0.9 dB at 6 GHz High Isolation: 28 dB Typical Fast Switching Speed: 0.5 µm GaAs PHEMT High Power: 36 dBm P1dB Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Description RFC GND GND VC1 VC2 RF1 RF2 GND GND GND GND GND Pin Configuration M/A-COM’s MASWSS0093 is a broadband GaAs PHEMT MMIC SPDT switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0093 is ideally suited for applications where very small size and low cost are required. PIN No. PIN Name Description 1 VC1 Control 1 2 RF1 RF Port 1 3 GND Ground The MASWSS0093, with its small size and low height, is ideal for 802.11a and 802.11b/g PC card and access point applications. 4 GND Ground 5 GND Ground 6 GND Ground The MASWSS0093 delivers high isolation, low insertion loss and high linearity up to 6 GHz. 7 GND Ground 8 RF2 RF Port 2 The MASWSS0093 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. 9 VC2 Control 2 10 GND Ground 11 RFC RF Input 12 GND 13 Ordering Information Paddle Ground 1 RF and DC Ground 1. The exposed pad centered on the package bottom must be connected to RF and DC ground. Part Number Package MASWSS0093 Bulk Packaging MASWSS0093TR 1000 piece reel MASWSS0093SMB Sample Test Board (Includes 5 Samples) Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power @ 3 V Control +37 dBm Input Power @ 5 V Control +39 dBm Operating Voltage +8.5 volts Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C Note: Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz MASWSS0093 V2 Electrical Specifications4: TA = 25°C, Z0 = 50Ω, Vc = 0 V/3 V, Pin = 0 dBm Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 2.4 GHz 5.3 GHz 5.8 GHz dB dB dB — — — 0.70 0.85 0.85 1.05 1.2 1.2 Isolation 2.4 GHz 5.3 GHz 5.8 GHz dB dB dB 24 23 21 29 28 26 — — — Return Loss DC - 6 GHz dB — 20 — IP2 Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V dBm dBm dBm dBm — — — — 98 81 107 87 — — — — Two Tone, +15 dBm/Tone, 5 MHz Spacing, >50 MHz 2.4 GHz, Vc = 3.0 V 5.8 GHz, Vc = 3.0 V 2.4 GHz, Vc = 5.0 V 5.8 GHz, Vc = 5.0 V dBm dBm dBm dBm — — — — 57 53 57 54 — — — — Input P-1dB 2.4 GHz 5.3 GHz 5.8 GHz dBm dBm dBm — — — 40 36 37 — — — 2nd Harmonic 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm dBm dBm — — -72 -69 — — 3rd Harmonic 2.4 GHz, Pin = +20 dBm 5.8 GHz, Pin = +20 dBm dBm dBm — — -85 -75 — — T-rise, T-fall 10% to 90% RF and 90% to 10% RF nS — 55 — Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS — 80 — Transients — mV — 14 — Control Current |Vc| = 3 V µA — 15 25 IIP3 Truth Table 4,5,6 Handling Procedures RFC– RF1 RFC—RF2 Please observe the following precautions to avoid damage: Control V1 Control V2 1 0 On Off Static Sensitivity 0 1 Off On Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Differential voltage, V(state 1) - V(state 0), must be +2.7 V minimum and must not exceed +5 V. 6. 0 = 0 ± 0.2 V, 1 = +2.9 V to +5 V. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant GaAs Broadband SPDT Switch DC - 6.0 GHz MASWSS0093 V2 Typical Performance Curves Insertion Loss Isolation 1.4 40 +25°C +85°C -30°C +25°C +85°C -30°C 1.2 35 1.0 30 0.8 25 0.6 0.4 20 1 2 3 4 5 6 1 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Return Loss Application Schematic 0 +25°C +85°C -30°C -5 C1, C2, C3 = 8 pF C3 -10 -15 GND RFC GND -20 -25 -30 VC1 VC2 RF1 RF2 C1 -35 C2 GND -40 1 2 3 4 5 GND 6 Frequency (GHz) Lead-Free 3 mm 12-lead PQFN† † GND GND GND Reference Application Note M538 for lead-free solder reflow recommendations. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.