T-1, (3-mm) Round, PCB Mount, Low Current Right Angle Indicator, J60B Series The J60B is a T-1 size right-angle indicator suitable as logic status, position, or fault indication. The J60B allows denser packaging where space is a premium and can be CMOS driven to save components. The J60B has the lamp located at 3.2mm, .125") above the PCB. The J60B series can be supplied with pinout reversed from that shown by adding “-RL” to the order code.. 2.5±.5 4 5.2 6.35 3.2 + 3Ø – 4.6 ref Red or yellow Anode 2.54 Green Anode + – (typ for single color) (typ for bi-color) Specify part desired as follows: J60B/Order Code For example: “J60B/G” designates an assembly with a standard diffused green LED. “J60B/G-RL” designates the same assembly with pins reversed. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Color Typical Characteristics Order Code Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=2mA @If=2mA (Deg) Recom. Op. If (mA) Red I 639 1.8 4.0 50 2 - 10 Green G 574 1.9 2.5 55 2 - 10 Yellow Y 591 1.85 4.0 45 2 - 10 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A