RF SAW Filter Part Number Package Application Last Modified 802-RF902.5M-C 3.0 x 3.0 SMD Wireless Communication Mar. 2, 2007 . TYPE : Wireless, RF SAW Filter PART NUMBER : 802-RF902.5M-C .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency (Fo) Maximum Insertion Loss Attenuation: Source Impedence (single ended)* Load Impendance (single ended)* Amplitude Ripple Maxium DC Voltage VSWR Condition Minimum Typical Maximum Units - - 902.5 - MHz 894.0~ 911.0 MHz - 2.7 3.5 dB Fo-200.0~ Fo-50.0MHz 50 57 - Fo+42.8~ Fo+60.0MHz 42 47 - Fo+60.0~ Fo+200.0MHz 50 57 - - - 50 - dB ohm - - 50 - ohm 894.0~ 911.0 MHz - 0.6 1.5 dBp-p - - - 0 V 894.0~ 911.0 MHz - 1.6 2.0 - Maximum Input Power - - - 10 dBm Operating Temperature - -30 - +65 ºC * No Matching Network . PACKAGE OUTLINE (mm) PIN LAYOUT TEST FIXTURE Source/ Load Impedance = 50 ohms A Ground B Out C Ground D Ground E In F Ground FREQUENCY RESPONSE VSWR SMITH CHART Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 802-RF902.5M-C