CYPRESS CYIL2SC1300AA

LUPA 1300-2
500 FPS High Speed CMOS Sensor
Features
CYIL2SM1300AA
Product Brief
a wide range of operating modes and features an LVDS interface
for easy system integration. By removing the visually highly
disturbing column patterned noise, this sensor allows building a
camera without having to perform any off-line correction or the
need for any memory making this sensor highly suitable for lower
cost applications. Moreover, since the on-chip column FPN
correction is more reliable than an off-line correction as it is
intrinsically compensated for supply and temperature variations,
this sensor also allows to build reliable high-end camera's without
having to worry about column FPN appearing in environments
with highly varying ambient temperatures.
■
1280 x 1024 active pixels
■
14 µm X 14 µm square pixels
■
1" optical format
■
Monochrome or color digital output
■
500 fps frame rate
■
On-chip 10-bit ADCs
■
12 LVDS serial outputs
■
Random programmable ROI readout
■
Pipelined, Triggered and Snapshot shutter
■
On-chip column FPN correction
■
Serial to Parallel Interface (SPI)
■
Limited supplies: Nominal 2.5V (some supplies require 3.3V)
■
0°C to 70°C operational temperature range
■
168-pin uPGA package
■
Power dissipation: 1.2W
The sensor requires only one master clock for operation up to 500
fps. It is housed in a 168-pin ceramic µPGA package.
The LUPA 1300-2 is available in a monochrome version or Bayer
(RGB) patterned color filter array and is available with and
without glass.
LUPA 1300-2 Die Photo
Applications
■
High speed machine vision
■
Motion analysis
■
Intelligent traffic system
■
Medical imaging
■
Industrial imaging
Description
The LUPA 1300-2 is a highly integrated SXGA high speed, high
sensitivity CMOS image sensor targeted at various high speed
machine vision and industrial monitoring applications. The
sensor runs at 500fps and features triggered and pipelined
shutter modes. The sensor packs 24 parallel 10-bit A/D
converters with an aggregate conversion rate of 740 MSPS.
On-chip digital column FPN correction allows the sensor to output
ready-to-use image data for all but the most demanding
applications. In order to allow simple and reliable system
integration, the 13 channel 8 Gbps LVDS serial link protocol
supports per channel skew correction and serial link integrity
monitoring. Peak responsivity of the 14x14um 6T pixel is 7350
V.m2/W.s. Dynamic range is measured to be 57dB. In full frame
video mode, the sensor consumes 1.2W from a 2.5V power
supply. The sensors integrates A/D conversion, on-chip timing for
Cypress Semiconductor Corporation
Document Number: 001-49820 Rev. **
•
Ordering Information
Marketing Part Number
(ES Samples)
CYIL2SM1300AA-GDCES
Mono/Color
mono with glass
CYIL2SM1300AA-GWCES
mono without glass
CYIL2SC1300AA-GDCES
color with glass
CYIL2SC1300AA-GWCES
color without glass
198 Champion Court
•
Package
168 pin ceramic
uPGA
San Jose, CA 95134-1709
•
408-943-2600
Revised October 29, 2008
LUPA 1300-2
General Specifications
Parameter
Electro-Optical Specifications
Specifications
Active Pixels
Parameter
Value
1280 (H) x 1024 (V)
Conversion gain
34uV/e
Pixel Size
14 µm x 14 µm
Full well charge
30000e
Pixel Type
Pipelined shutter pixel
Responsivity
7350 V.m2/W.s @680nm
Pixel Rate
620 Mbps per channel (12 serial
LVDS outputs)
Fill factor
40%
Parasitic light sensitivity
< 1/10000
Shutter Type
Pipelined and Triggered Global
Shutter
Dark noise
37e-
Frame Rate
500 fps at 1.3 Mpixel (can be
boosted by subsampling and windowing).
QE x FF
35% @ 680nm
FPN
2% of Vsat
PRNU
<1% of Vsignal
315Mhz for 500 fps
Dark signal
170mV/s @ 30°C
Windowing (ROI)
Randomly programmable ROI read
out up to four multiple windows
Power dissipation
1.2W
Read Out
Windowed, flipped, mirrored, and
subsampled read out possible
ADC Resolution
10 bit, on-chip
Sensitivity
10.16 V/lux.s @ 550nm
Extended Dynamic Range
Multiple slope (up to 90 dB optical
dynamic range)
Master Clock
Document History Page
Document Title: LUPA 1300-2, 500 FPS High Speed Image Sensor
Document Number:
REV
ECN
Orig. of Change
Submission Date
**
2598181
VED
October 29, 2008
Description Of Change
New image sensor document
Sales, Solutions, and Legal Information
Worldwide Sales and Design Support
Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. For more information on Image sensors, please contact at [email protected]
Cypress offers standard and customized CMOS image sensors for consumer as well as industrial and professional applications.
Consumer applications include the fast growing high volume cell phone, digital still cameras as well as automotive applications.
Cypress' customized CMOS image sensors are characterized by very high pixel counts, large area, very high frame rates, large
dynamic range, and high sensitivity.
© Cypress Semiconductor Corporation, 2008. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any
circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for medical,
life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as critical
components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Document Number: 001-49820 Rev. **
Revised October 29, 2008
All products and company names mentioned in this document may be the trademarks of their respective holders.
Page 2 of 2