MA-COM TVB075NSA-L

SiBar Thyristor Surge Protectors
TVBxxxNSA-L Series
Raychem Circuit Protection's SiBar thyristor surge
protection devices are designed to help protect sensitive
telecommunication equipment from the hazards caused
by lightning, power contact, and power induction. These
devices have a high electrical surge capability to help
protect against transient faults and a high off-state
impedance, rendering them virtually transparent during
normal system operation.
SiBar thyristor surge protectors are designed to assist
telecommunication and computer telephony equipment
in meeting the applicable requirements and industry
specifications.
Benefits:
Features:
• RoHS compliant
• Helps provide protection for sensitive telecom
electronic equipment
• Bidirectional crowbar transient voltage protection
• Low leakage current
• Broad voltage range 58V – 320V
with improved Vdrm/Vbo voltage range
• Low power dissipation
• High off-state impedance
• Fast, reliable operation
• Low on-state voltage
• No wear-out mechanisms
• High surge capability
• Helps designers meet worldwide telecom standards
• Short-circuit failure mode
• Helps reduce warranty and service costs
• Surface-mount technology
• Easy installation
• DO-214AA SMB package
• Helps improve power efficiency of equipment
• 10 x 1000 μs 50A surge rating
• Helps equipment comply with TIA-968,
Telcordia GR-1089, IEC61000-4-5, ITU K.20/21/45
Applications:
• Modems
• Set top boxes
• Fax machines
• POS systems
• Phones, answering machines • Analog and digital linecards (xDSL, T1/E1...)
• PBX systems
• Other customer premise and central office network equipment requiring protection
Document: SCD 27218
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved.
Status: Released
1
Rev: B
Date: DECEMBER 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxNSA-L Series
Table SB1 - Electrical Characteristics
TVB058NSA-L
58
77
150
4
44
84
Off-State
Current
VD2=VDM
(μA)
5
TVB065NSA-L
65
88
150
4
41
79
5
TVB075NSA-L
75
98
150
4
34
65
5
TVB090NSA-L
90
130
150
4
31
58
5
TVB120NSA-L
120
160
150
4
24
46
5
TVB140NSA-L
140
180
150
4
23
44
5
TVB170NSA-L
170
220
150
4
20
39
5
TVB180NSA-L
180
240
150
4
19
37
5
TVB190NSA-L
190
260
150
4
19
36
5
TVB220NSA-L
220
300
150
4
17
33
5
TVB275NSA-L
275
350
150
4
15
31
5
TVB320NSA-L
320
400
150
4
14
27
5
Part Number
VDM Max. (V)
VBO Max. (V)
IH Min. (mA)
VT Max. (V)
C1 (Typ)
50VDC Bias
C2 (Typ)
2VDC Bias
Notes: All electrical characteristics are measured at 25°C.
VDM measured per UL497B pulse requirements: at max. off-state leakage current (IDM) = 5 µA.
VBO measured at 100V/µs.
C1 measured at 1 MHz with a 50 VDC bias.
C2 measured at 1MHz with a 2VDC bias.
Table SB2 – Surge Current Rating
TIA-968
Type A
Part Number
TVBxxxNSA-L
Ipp(A)
5 x 320 µs
Telcordia GR-1089*
IEC61000-4-5
Ipp (A)
Ipp (A)
10 x 1000 µs 2 x 10 µs
Ipp (A)
8 x 20 µs
ITU K.20/21/45*
Type B
Ipp(A)
pp (A)
10 x 560 µs 10 x 160 µs
90
70
100
50
150
150
ITSM
IPP (A)
di/dt dV/dt
5 x 310 μs
Min.
(A/µs) (V/µs)
(VOC: 10 x 700μs) (A)
90
22 500 2000
Notes: *Lightning current wave forms for applicable industry specification.
ITSM, peak on-state surge current is measured at 60 Hz, one cycle.
di/dt: critical rate-of-rise of on-state current (pulsed power amplifier Vmax = 600V; C = 30µF).
dV/dt: critical rate-of-rise of off-stage voltage (linear wave form, VD = rated VBO, Tj = 25°C
Document: SCD 27218
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved.
Status: Released
2
Rev: B
Date: DECEMBER 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxNSA-L Series
Table SB3 – Dimensions in Millimeters
A
Dimension
B
Min.
TVBxxxNSA-L
Max.
TVBxxxNSA-L
Max.
Min.
D
Max.
Min.
Max.
4.06
4.57
3.30
3.94
1.90
2.41
1.95
2.20
(0.160)
(0.180)
(0.130)
(0.155)
(0.075)
(0.095)
(0.077)
(0.087)
H
Dimension
C
Min.
J
Min.
Max.
K
Min.
Max.
P
Min.
Max.
S
Ref
Min
Max.
0.051
0.200
0.150
0.31
0.76
1.27
0.51
5.21
5.59
(0.002)
(0.008)
(0.006)
(0.012)
(0.030)
(0.050)
(0.202)
(0.205)
(0.220)
Notes: *D dimension is measured within dimension P.
TVB series devices use industry standard SMB package type.
All devices are bidirectional and may be oriented in either direction for installation
Table SB4 – Physical Characteristics and Environmental Specifications
Lead material
Matte tin finish (-L devices)
Encapsulating material
Epoxy, meets UL94V-0 requirements
Solderability
per MIL-STD-750, Method 2026
Solder heat withstand
per MIL-STD-750, Method 2031
Solvent resistance
per MIL-STD-750, Method 1022
Mechanical shock
per MIL-STD-750, Method 2016
Vibration
per MIL-STD-750, Method 2056
Storage temperature (°C)
-55 to 150
Operating temperature (°C)
-40 to 125
Junction temperature (°C)
175
Maximum Lead Temperature for Soldering Purpose; for 10s (°C) 260
Table SB5 – Reliability Tests
Test
High temperature, reverse bias
Conditions
+100°C, 50VDC bias
Duration
1000 hours
High humidity, high temperature, reverse bias
85% RH, +85°C, 50VDC bias
1000 hours
High temperature storage life
+150°C
1000 hours
Temperature cycling
-65°C to +150°C, 15 minute dwell
1000 cycles
Autoclave
100% RH, +121°C, 15 PSI
96 hours
Document: SCD 27218
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved.
Status: Released
3
Rev: B
Date: DECEMBER 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxNSA-L Series
Document: SCD 27218
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved.
Status: Released
4
Rev: B
Date: DECEMBER 12, 2007
SiBar Thyristor Surge Protectors
TVBxxxNSA-L Series
Table SB6 – Packaging and Marking Information
Recommended Pad Layout (millimeters/inchs)
Part
Description
TVB058NSA-L
Tape and
Reel
Quantity
2,500
Standard
Package
10,000
Part
Marking
58NA
Dimension
A (Nom.)
2.261 (0.089)
Dimension
B (Nom.)
2.159 (0.085)
Dimension
C (Nom.)
2.743 (0.108)
Agency
Recognition*
UL
TVB065NSA-L
2,500
10,000
65NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB075NSA-L
2,500
10,000
75NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB090NSA-L
2,500
10,000
90NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB120NSA-L
2,500
10,000
12NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB140NSA-L
2,500
10,000
14NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB170NSA-L
2,500
10,000
17NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB180NSA-L
2,500
10,000
18NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB190NSA-L
2,500
10,000
19NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB220NSA-L
2,500
10,000
22NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB275NSA-L
2,500
10,000
27NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
TVB320NSA-L
2,500
10,000
32NA
2.261 (0.089)
2.159 (0.085)
2.743 (0.108)
UL
* UL497B, File # E179610
308 Constitution Drive, MS R21/2A
Menlo Park, CA USA 94025-1164
Tel (800) 227-7040
(650) 361-6900
Fax (650) 361-2508
www.circuitproection.com
www.circuitprotection.com.hk (Chinese)
www.circuitprotection.jp (Japanese)
Raychem, PolySwitch, SiBar, TE Logo and Tyco Electronics are trademarks.
All other trademarks and copyrights are property of their respective owners.
Document: SCD 27218
SiBar Thyristor Surge Protectors
© 2007 Tyco Electronics Corporation. All rights Reserved.
Status: Released
5
Rev: B
Date: DECEMBER 12, 2007