Preliminary Data Sheet 10.0AMPS ULTRA FAST SURFACE MOUNT POWER RECTIFIERS Mechanical Dimensions .055 (1.40) .047 (1.20) .036 (0.91) .028 (0.71) .412 (10.46) .388 (9.86) .098 (2.50) .083 (2.10) .069 (1.75) .626 (15.89) .578 (14.69) .202 (5.13) .198 (5.03) D2pack(TO-263) .020 (0.50) .012 (0.30) Dimensions in inch(mm) MECHANICAL DATA FEATURES * * * * * * * .189 (4.80) .173 (4.40) .053 (1.35) .049 (1.25) .053 (1.35) .126 (3.20) .110 (2.80) .337 (8.55) .321 (8.15) .049 (1.25 REF.) VFD10C05~60 Description * * * * * Low switching noise Low forward voltage drop Low thermal resistance High current capability Ultra fast switching speed High reliability Good for switching mode circuit Case: D2PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 2.2 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS SYMBOL VFD10C05 VFD10C10 VFD10C20 VFD10C30 VFD10C40 VFD10C50 VFD10C60 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 500 600 Volts Maximum RMS Voltage VRMS 35 70 140 210 280 350 420 Volts VDC 50 100 200 300 400 500 600 Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 125 oC Volts IO 10.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 125 Amps Typical Thermal Resistance RθJC Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range CJ 0 3 50 T J , T STG C/ W pF 30 0 -55 to + 150 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 10.0A DC @T C = 25 o C Maximum DC Reverse Current at Rated DC Blocking Voltage @T C = 100 oC Maximum Reverse Recovery Time (Note 1) SYMBOL VF VFD10C05 VFD10C10 VFD10C20 VFD10C30 VFD10C40 VFD10C50 VFD10C60 1. 1.30 1.35 1.70 10 IR trr NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. Suffix “A” =Common Anode. Volts uAmps 500 50 UNITS 75 nSec 2003-1 Preliminary Data Sheet 10.0AMPS ULTRA FAST SURFACE MOUNT POWER RECTIFIERS 1000 10 8 6 Single Phase Half Wave 60Hz Inductive or Resistive Load 4 0 150 FIG. 3 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 150 TC = 100 100 10 TC = 25 1.0 125 0.1 100 0 8.3ms Single Half Sine-Wave (JEDEC Method) 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 75 50 25 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 4 2 ~4 30 0C VF D1 0C 0 10 0 5~ 20 20 50 60 ~ 0C 1 D VF 1.0 .4 TJ=25 Pulse Width = 300uS 1% Duty Cycle .2 .1 .6 .8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) 40 D1 PEAK FORWARD SURGE CURRENT, (A) 50 100 CASE TEMPERATURE, ( ) INSTANTANEOUS REVERSE CURRENT, (uA) 15 0 INSTANTANEOUS FORWARD CURRENT, (A) FIG. 2 - TYPICAL REVERSE CHARACTERISTICS FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE VF AVERAGE FORWARD CURRENT, (A) RATING AND CHARACTERISTIC CURVES ( VFD10C05 THRU VFD10C60 ) 2.0 200 100 VFD 10C 05~ 60 40 20 20 VFD 10C 10 6 30~ 60 TJ = 25 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V )