NCV8450, NCV8450A Self-Protected High Side Driver with Temperature and Current Limit The NCV8450/A is a fully protected High−Side Smart Discrete device with a typical RDS(on) of 1.0 W and an internal current limit of 0.8 A typical. The device can switch a wide variety of resistive, inductive, and capacitive loads. http://onsemi.com MARKING DIAGRAM Features • • • • • • • • • • Short Circuit Protection Thermal Shutdown with Automatic Restart Overvoltage Protection Integrated Clamp for Inductive Switching Loss of Ground Protection ESD Protection Slew Rate Control for Low EMI Very Low Standby Current NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable This is a Pb−Free Device SOT−223 (TO−261) CASE 318E XXXXX A Y W G AYW XXXXXG G 1 = V8450 or 8450A = Assembly Location = Year = Work Week = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 8 of this data sheet. Typical Applications • Automotive • Industrial PRODUCT SUMMARY Symbol Characteristics VIN_CL Overvoltage Protection VD(on) Operation Voltage Ron On−State Resistance © Semiconductor Components Industries, LLC, 2012 April, 2012 − Rev. 3 Value Unit 54 V 4.5 − 45 V 1.0 W 1 Publication Order Number: NCV8450/D NCV8450, NCV8450A VD (Pins 2, 4) Regulated Charge Pump Output Clamping Control Logic IN (Pin 1) R_IN OUT (Pin 3) Current Limitation Overtemperature Detection Figure 1. Block Diagram PACKAGE PIN DESCRIPTION Pin # Symbol Description 1 IN Control Input, Active Low 2 VD Supply Voltage 3 OUT 4 VD Output Supply Voltage http://onsemi.com 2 NCV8450, NCV8450A MAXIMUM RATINGS Value Rating Symbol Min Max Unit VD −16 45 V 100 V 15 mA Internally Limited A DC Supply Voltage (Note 1) Load Dump Protection (RI = 2 W, td = 400 ms, VIN = 0, 10 V, IL = 150 mA, Vbb = 13.5 V) VLoaddump Input Current Iin Output Current (Note 1) Iout Total Power Dissipation @ TA = 25°C (Note 2) @ TA = 25°C (Note 3) −15 PD W 1.13 1.60 Electrostatic Discharge (Note 4) (Human Body Model (HBM) 100 pF/1500 W) Input All other kV 1 5 Single Pulse Inductive Load Switching Energy (Note 4) (VDD = 13.5 V, I = 465 mApk, L = 200 mH, TJStart = 150°C) EAS Operating Junction Temperature Storage Temperature 29 mJ TJ −40 +150 °C Tstorage −55 +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Reverse Output current has to be limited by the load to stay within absolute maximum ratings and thermal performance. 2. Minimum Pad. 3. 1 in square pad size, FR−4, 1 oz Cu. 4. Not subjected to production testing. THERMAL RESISTANCE RATINGS Parameter Thermal Resistance (Note 5) Junction−to−Ambient (Note 2) Junction−to−Ambient (Note 3) Symbol Max Value RqJA RqJA 110 78.3 5. Not subjected to production testing. − + ID VD IIN IN OUT VOUT NCV8450/A Figure 2. Applications Test Circuit http://onsemi.com 3 Unit K/W NCV8450, NCV8450A ELECTRICAL CHARACTERISTICS (6 v VD v 45 V; −40°C <TJ < 150°C unless otherwise specified) Value Symbol Rating Conditions Min Typ Max Unit OUTPUT CHARACTERISTICS Operating Supply Voltage VSUPPLY On Resistance (Pin 1 Connected to GND) RON − 45 V TJ = 25°C , IOUT = 150 mA, VD = 7 V − 45 V TJ = 150°C, IOUT = 150 mA, VD = 7 V − 45 V (Note 6) TJ = 25°C , IOUT= 150 mA, VD = 6 V 1.0 1.4 2 3 W 1.1 2.1 ID VD v 20 V VD > 20 V 0.6 10 100 Input Current – Off State IIN_OFF VOUT v 0.1 V, RL = 270 W, TJ = 25°C VOUT v 0.1V, RL = 270 W, TJ = 150°C (Note 6) Input Current – On State (Pin 1 Grounded) IIN_ON 1.5 Input Resistance (Note 6) RIN 1 Standby Current (Pin 1 Open) 4.5 mA INPUT CHARACTERISTICS −50 −40 mA 3 mA kW SWITCHING CHARACTERISTICS Turn−On Time (Note 7) (VIN = VD to 0 V) to 90% VOUT tON RL = 270 W (Note 6) VD = 13.5 V, RL = 270 W, TJ = 25°C 30 125 100 ms Turn−Off Time (Note 7) (VIN = 0 V to VD ) to 10% VOUT tOFF RL = 270 W (Note 6) VD = 13.5 V, RL = 270 W, TJ = 25°C 60 175 150 ms Slew Rate On (Note 7) (VIN = VD to 0V) 10% to 30% VOUT dV/dtON RL = 270 W (Note 6) VD = 13.5 V, RL = 270 W, TJ = 25°C 0.7 4 4 V/ms Slew Rate Off (Note 7) (VIN = 0 V to VD) 70% to 40% VOUT dV/dtOFF RL = 270 W (Note 6) VD = 13.5 V, RL = 270 W, TJ = 25°C 0.9 4 4 V/ms 0.6 OUTPUT DIODE CHARACTERISTICS (Note 6) Drain−Source Diode Voltage VF IOUT = −0.2 A Continuous Reverse Drain Current IS TJ = 25°C V 0.2 A − °C PROTECTION FUNCTIONS (Note 8) Temperature Shutdown (Note 6) Temperature Shutdown Hysteresis (Note 6) Output Current Limit TSD 150 TSD_HYST ILIM 175 5 TJ = −40°C, VD = 13.5 V, tm = 100 ms (Note 6) TJ = 25 °C, VD = 13.5 V, tm = 100 ms TJ = 150 °C , VD = 13.5 V, tm = 100 ms (Note 6) 0.5 0.8 °C 1.5 A Output Clamp Voltage (Inductive Load Switch Off) At VOUT = VD − VCLAMP VCLAMP IOUT = 4 mA 45 52 V Overvoltage Protection VIN_CL ICLAMP = 4 mA 50 54 V 6. Not subjected to production testing 7. Only valid with high input slew rates 8. Protection functions are not designed for continuous repetitive operation and are considered outside normal operating range http://onsemi.com 4 NCV8450, NCV8450A TYPICAL CHARACTERISTIC CURVES 2.0 1.8 1.0 Iout = 150 mA 0.95 1.6 1.2 RDS(on) (W) RDS(on) (W) 1.4 VD = 6 V 1.0 0.8 VD = 15 V 0.6 0.85 0.8 VD = 9 V 0.75 0.7 0.4 0.65 0.2 0 −40 VD = 6 V 0.9 −20 0 20 40 60 80 100 TEMPERATURE (°C) 120 0.6 140 TA = 25°C 0 0.1 80 4.5 70 TURN ON TIME (ms) 4.0 RDS(on) (W) 3.5 125°C 25°C 150°C 2.0 −40°C 1.5 1.0 0 0 10 20 30 40 VD = 42 V 50 40 VD = 13.5 V 30 20 VD = 9 V 1.2 SLEW RATE (ON) (V/ms) 120 VD = 42 V 80 VD = 13.5 V 60 VD = 9 V 40 20 −20 0 20 40 60 80 100 0 20 40 60 80 100 120 140 Figure 6. Turn On Time vs. Temperature RLOAD = 270 W 100 −20 TEMPERATURE (°C) Figure 5. RDS(on) vs. VD TURN OFF TIME (ms) RLOAD = 270 W 60 0 −40 50 VD (V) 0 −40 0.5 10 0.5 140 0.4 Figure 4. RDS(on) vs. Output Load 5.0 2.5 0.3 OUTPUT LOAD (A) Figure 3. RDS(on) vs. Temperature 3.0 0.2 120 1.0 VD = 42 V 0.8 VD = 13.5 V 0.6 VD = 9 V 0.4 0.2 0 −40 140 RLOAD = 270 W −20 0 20 40 60 80 100 120 140 TEMPERATURE (°C) TEMPERATURE (°C) Figure 8. Slew Rate (ON) vs. Temperature Figure 7. Turn Off Time vs. Temperature http://onsemi.com 5 NCV8450, NCV8450A TYPICAL CHARACTERISTIC CURVES 1.4 VD = 13.5 V 1 0.8 1.2 VD = 42 V CURRENT LIMIT (A) SLEW RATE (OFF) (V/ms) 1.2 VD = 9 V 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0 −40 RLOAD = 270 W −20 0 20 40 60 80 100 120 0 −40 140 VD = 13.5 V −20 40 60 80 100 120 140 TEMPERATURE (°C) Figure 10. Current Limit vs. Temperature 70 VD, LEAKAGE CURRENT (mA) 1.0 TA = −40°C 0.8 25°C 0.6 125°C 0.4 150°C 0.2 0 0 10 30 20 VD = 45 V 50 40 30 20 10 0 −40 50 40 60 VD = 25 V VD = 15 V −20 VD, VOLTAGE (V) 0 20 40 60 80 100 TEMPERATURE (°C) 120 140 Figure 12. VD Leakage Current vs. Temperature Off−State Figure 11. Peak Short Circuit Current vs. VD Voltage 70 2.5 60 INPUT CURRENT (mA) VD, LEAKAGE CURRENT (mA) 20 TEMPERATURE (°C) 1.2 50 40 30 125°C −40°C 20 150°C 25°C 10 0 0 0 Figure 9. Slew Rate (OFF) vs. Temperature 1.4 PEAK SC CURRENT (A) 1 5 10 15 20 25 30 35 40 2.0 1.5 VD = 28 V VD = 15 V 1.0 VD = 6 V 0.5 0 −40 45 VD = 45 V −20 0 20 40 60 80 100 120 VD, VOLTAGE (V) TEMPERATURE (°C) Figure 13. VD Leakage Current vs. VD Voltage Off−State Figure 14. On−State Input Current vs. Temperature http://onsemi.com 6 140 NCV8450, NCV8450A TYPICAL CHARACTERISTIC CURVES 80 150°C 60 125°C 50 25°C 40 −40°C 10 OUTPUT VOLTAGE (V) INPUT CURRENT (mA) 70 12 Rout = 100 W 30 20 10 0 0 20 8.0 6.0 4.0 2.0 ROUT = 100 kW VIN = 0 V 0 0 40 1 2 3 VD, VOLTAGE (V) 8 9 900 8 800 150°C 7 6 700 5 CURRENT (mA) 125°C −40°C 4 3 25°C 2 600 500 400 300 200 1 TA = 150°C VD = 20 V 100 0 5 0 50 10 15 20 25 30 35 40 45 50 55 60 65 VD, VOLTAGE (V) 100 Figure 17. Single Pulse Maximum Switch−off Current vs. Load Inductance 1000 VD = 13.5 V 100 VD = 24 V VD = 42 V 10 1 −40 −20 0 20 150 LOAD INDUCTANCE (mH) Figure 16. Input Current vs. VD Voltage On−State SHUTDOWN TIME (ms) INPUT CURRENT (mA) 7 Figure 15. Output Voltage vs. VD Voltage Figure 18. Input Current vs. VD Voltage Off−State 0 4 5 6 VD, VOLTAGE (V) 40 60 80 100 120 140 TEMPERATURE (°C) Figure 19. Initial Short−Circuit Shutdown Time vs. Temperature http://onsemi.com 7 10 NCV8450, NCV8450A TYPICAL CHARACTERISTIC CURVES 140 120 RqJA (°C/W) 100 PCB Cu thickness, 1.0 oz 80 60 PCB Cu thickness, 2.0 oz 40 20 0 300 400 500 600 100 200 COPPER HEAT SPREADER AREA (mm2) 0 700 R(t), EFFECTIVE TRANSIENT THERMAL RESPONSE Figure 20. RqJA vs. Copper Area 1000 100 Duty Cycle = 0.5 0.2 10 0.1 0.05 0.02 1 0.01 0.1 Single Pulse 0.01 Psi TSP−A(t) 0.001 1E−06 1E−05 1E−04 1E−03 1E−02 1E−01 1E+00 1E+01 1E+02 1E+03 PULSE TIME (s) Figure 21. Transient Thermal Response ISO PULSE TEST RESULTS Test Pulse Test Level Test Results Pulse Cycle Time and Generator Impedance 1 200 V C 500 ms, 10 W 2 150 V C 500 ms, 10 W 3a 200 V C 100 ms, 50 W 3b 200 V C 100 ms, 50 W 5 175 V E(100 V) 400 ms, 2 W ORDERING INFORMATION Package Shipping† NCV8450STT3G SOT−223 (Pb−Free) 4000 / Tape & Reel NCV8450ASTT3G SOT−223 (Pb−Free) 4000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 8 NCV8450, NCV8450A PACKAGE DIMENSIONS SOT−223 (TO−261) CASE 318E−04 ISSUE M D b1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 4 HE E 1 2 3 b e1 e 0.08 (0003) C q A A1 DIM A A1 b b1 c D E e e1 L1 HE q MIN 1.50 0.02 0.60 2.90 0.24 6.30 3.30 2.20 0.85 1.50 6.70 0° MILLIMETERS NOM MAX 1.63 1.75 0.06 0.10 0.75 0.89 3.06 3.20 0.29 0.35 6.50 6.70 3.50 3.70 2.30 2.40 0.94 1.05 1.75 2.00 7.00 7.30 10° − MIN 0.060 0.001 0.024 0.115 0.009 0.249 0.130 0.087 0.033 0.060 0.264 0° INCHES NOM 0.064 0.002 0.030 0.121 0.012 0.256 0.138 0.091 0.037 0.069 0.276 − MAX 0.068 0.004 0.035 0.126 0.014 0.263 0.145 0.094 0.041 0.078 0.287 10° L1 SOLDERING FOOTPRINT* 3.8 0.15 2.0 0.079 2.3 0.091 2.3 0.091 6.3 0.248 2.0 0.079 1.5 0.059 SCALE 6:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 http://onsemi.com 9 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NCV8450/D