AUDIO RCA JACK RIGHT ANGLED SOCKET SECTION 6 Competitively priced Industry Compatible PCB Mounting SPECIFICATION Contact resistance: Insulation resistance: Withstanding Voltage: Soldering heat: Insertion Force: Extraction Force: Lifetime: 30mΩ max. (INITIAL) 100mΩ min. AT 500V DC 500V AC for one minute 260±5°C for 5±1 seconds 0.3-3.0 KG 0.3-3.0 KG 5,000 cycles min OUTLINE DRAWING 10.0 Ø 8.3 1x2 4.0 1.50 4.0 2.00 ORDERING INFORMATION DBC RCA 0848A -2B Dubilier Connectors RCA Jacks Series Colour -2B = Black -2R = Red -2W = White -2Y - Yellow 155 www.dubilier.co.uk 2 T S 4.0 4.0 3.5 6.50 8.0 1 S 8.0 2.2x1.2 T 4.5 9.5 Ø 3.3 5.0 10.0 4.0 AUDIO RCA JACK RIGHT ANGLED SOCKET SECTION 6 Competitively priced Industry Compatible PCB Mounting SPECIFICATION Contact resistance (DCR 0.1A) 1, InItial, before any testing: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip ,(NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip,(NO) contact: 100mΩ 0.3kg - 5.0kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 5.0kg before movement or break from housing occurs Terminal for PC board temperature: 260 ± 5˚C for 5 ± 1.0 seconds -25˚C to 70˚C More than 100MΩ by 500v DC at 90 - 95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A 2, After life test with mating plug: Insertation Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: OUTLINE DRAWING ORDERING INFORMATION DBC RCA 0843 Dubilier Connectors RCA Jack Series 156 www.dubilier.co.uk SECTION 10 3