GBJ25005 thru GBJ2510 SEP ELECTRONIC CORP. 25 A Single-Phase Bridge Rectifier Rectifier Reverse Voltage 50 to 1000V GBJ-4 4.6 +0.2 30.0+0.3 3.6 +0.2 3.2 +0.2 Features 3.5 +0.2 20.0+0.3 This series is UL listed under the Recognized Component Index, file number E142814 Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High case dielectric strength of 1500VRMS Ideal for printed circuit boards High surge current capability 2.5 +0.2 + ~ ~ _ 5 11.0+ 0.2 4+0.2 2.2 +0.2 17.5+0.5 Mechanical Data 1.0+0.1 0.7+0.1 2.7 +0.2 Case : Molded plastic body over passivated junctions Terminals : Plated leads solderable per MIL-STD-750, Method 2026 Polarity : Polarity symbols molded on body Mounting Position : Any(3) Mounting Torque : 5 in-lbs max. Weight : 0.26 ounce, 7.0 grams (approx) 10 +0.2 7.5+0.2 7.5+0.2 Dimensions in millimeters(1mm =0.0394") Maximum Ratings & Thermal Characteristics Rating at 25 C ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz. For Capacitive load derate current by 20%. GBJ GBJ GBJ GBJ GBJ GBJ Parameter Symbol 25005 2501 2502 2504 2506 2508 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 GBJ 2510 unit 1000 V Maximum RMS bridge input voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward (with heatsink note1 ) rectified current at Tc=100 C (without heatsink) IF(AV) 25.0 4.2 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 350 A I t 510 A sec Typical thermal resistance per element (note 1) RthJC 1.0 Operating junction and storage temperature range TJ, TSTG -55 to + 150 Rating for fusing ( t<8.3ms) 2 2 C/W C Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz. For Capacitive load derate by 20 %. GBJ GBJ GBJ GBJ GBJ GBJ Parameter Symbol 25005 2501 2502 2504 2506 2508 GBJ 2510 Unit Maximum instantaneous forward voltage drop per leg at 12.5 A VF 1.05 V Maximum DC reverse current at rated TA =25 C DC blocking voltage per element TA =125 C IR 10.0 500 A Notes: (1) Device mounted on 250mm x 250mm x 20mm aluminum plate heatsink. 2005 SEP ELECTRONIC CORP Rating and Characteristic Curves GBJ25005 thru GBJ2510 ( TA=25 C Unless otherwise noted ) Fig. 1 Derating Curve for Output Rectified Current Fig. 2 Maximum Non-repetitive Peak Forward Surge Current Peak Forward Surge Current, Amperes 30.0 Average Forward Output Current, Amperes with heatsink 25.0 20.0 60Hz Resistive of Inductive Load 15.0 10.0 without heatsink 5.0 400 8.3ms Single half-sine-Wave [JEDEC Method] 300 200 100 0 10 1 0 50 100 150 Case Temperature, C Instantaneous Reverse Current , A 1000 Fig. 3 Typical Instantaneous Forward Characteristics 10 Instantaneous Forward Current, Amperes 100 Number of Cycles at 60Hz 0 1.0 Fig. 4 Typical Reverse Characteristics at Tj=25 C Tj=125 C 100 Tj=100 C 10 Tj=50 C 1.0 Tj=25 C 0.1 0 0.1 20 Tj=25 CC Tj=25 40 60 Fig. 5 Typical Junction Capacitance Pulse Width=300us 2% duty cycle 1000 Tj=25 C f =1.0 MHz Vsig=50mV p.p. 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage, Volts 1.6 1.8 Capacitance, pF 0.001 0.6 100 Percent of Rated Peak Reverse Voltage, % 0.01 0 80 100 10 1 10 Reverse Voltage, Volts 2005 SEP ELECTRONIC CORP. 100