Analog Power AM3904N Dual N-Channel Logic Level MOSFET These miniature surface mount MOSFETs utilize High Cell Density process. Low rDS(on) assures minimal power loss and conserves energy, making this device ideal for use in power management circuitry. Typical applications are logic switch control, power management in portable and batterypowered products such as computers, printers, PCMCIA cards, cellular and cordless telephones. • • • • PRODUCT SUMMARY VDS (V) rDS(on) (OHM) 0.45 @ VGS = 4.5 V 25 0.63 @ VGS = 2.5V Low rDS(on) Provides Higher Efficiency and Extends Battery Life Miniature TSOP-6 Surface Mount Package Saves Board Space Very fast switching Gate to Source Zener Diode ESD Protect ID (A) 0.5 0.2 1 6 2 5 3 4 o ABSOLUTE MAXIMUM RATINGS (T A = 25 C UNLESS OTHERWISE NOTED) Symbol Maximum Units Parameter Drain-Source Voltage 25 VDS V Gate-Source Voltage 8 VGS o TA=25 C a Continuous Drain Current o TA=70 C b ID 0.7 IDM Pulsed Drain Current a IS Continuous Source Current (Diode Conduction) 2 Power Dissipation o TA=70 C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambienta t <= 5 sec Steady-State 0.9 PD Operating Junction and Storage Temperature Range A ±0.3 o TA=25 C a A 0.58 W 0.7 TJ, Tstg -55 to 150 o C Symbol Maximum Units RΤΗ JA 140 180 o C/W Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 1 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-AM3904_B Analog Power AM3904N o SPECIFICATIONS (TA = 25 C UNLESS OTHERWISE NOTED) Parameter Symbol Test Conditions Drain-Source Breakdown Voltage Gate-Threshold Voltage Gate-Body Leakage V(BR)DSS VGS(th) IGSS VGS = 0 V, ID = 250 uA VDS = VGS, ID = -250 uA Zero Gate Voltage Drain Current IDSS Min Limits Unit Typ Max Static On-State Drain Current A Drain-Source On-Resistance Forward Tranconductance Diode Forward Voltage Dynamic A A 25 0.67 0.85 V 1.5 VDS = 20 V, VGS = 0 V 100 nA VDS = 20 V, VGS = 0 V 1 10 uA VDS = 20 V, VGS = 0 V, T J = 55oC ID(on) VDS = 5 V, VGS = 2.5 V rDS(on) VGS = 4.5 V, ID = 0.5 A o VGS = 4.5 V, ID = 0.5 A TJ = 55 C VGS = 2.5 V, ID = 0.2 A 0.5 0.33 0.36 0.45 A g fs VSD VDS = 5 V, ID = 0.5 A IS = 0.5 A, VGS = 0 V 1.5 0.85 1.20 Qg Qgs Qgd VDS = 5 V, VGS = 4.5 V, ID = 0.5 A 1.7 0.38 0.47 2.3 0.72 0.87 nC td(on) tr td(off) tf VDD = 6 V, ID = 0.5 A, VGEN = 4.5 V, RG = 50 Ω 6.5 11 13 3 13 19 24 7 ns 0.45 0.49 0.63 Ω S V b Total Gate Charge Gate-Source Charge Gate-Drain Charge Switching Turn-On Delay Time Rise Time Turn-Off Delay Time Fall-Time Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. 2 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-AM3904_B Analog Power AM3904N Typical Electrical Characteristics Figure 2. On-Resistance Variation with Drain Current and Gate Voltage Figure 1. On-Region Characteristics Figure 4. On-Resistance Variation with Figure 3. On-Resistance Variation Gate to Source Voltage with Temperature Figure 5. Transfer Characteristics Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature 3 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-AM3904_B Analog Power AM3904N Typical Electrical Characteristics Figure 9. Maximum Safe Operating Area Figure 10. Single Pulse Maximum Power Dissipation Normalized Thermal Transient Junction to Ambient Figure 11. Transient Thermal Response Curve 4 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-AM3904_B Analog Power AM3904N Package Information TSOP-6: 6LEAD 5 July, 2002 - Rev. A PRELIMINARY Publication Order Number: DS-AM3904_B