AdvancedPower Technologies ECLIPSE TM Monitor With ConfidenceTM Complete Temperature Monitoring Plus: Direct Fiber Winding Temperature Built-In Annunciator GIC Core Saturation Detection Programmable Function Buttons Ethernet SCADA Communications Web-Based GUI Integrates Easily With: Dissolved Gas Monitors Bushing Monitors Load Tap Changer Controls A Platform for Complete Power Transformer Monitoring Real-Time Loading Prediction Automatic E-mail Notifications Integrated Condition Based Assessment for LTCs Analog and Digital Input Data Concentrator Real-Time “Loss-of-Life” Calculations Automatic LTC Voltage Control No Calibration Required, Ever ECLIPSE TM A Complete Monitoring Platform Up to Up to 4 Temperature Probes 8 Direct Fiber Winding Inputs 8 Relay Outputs Up to12 Aux CT Inputs Up to 8 Analog Inputs Up to 45 Digital Inputs Data Concentrator Collect data around your transformer for use in QuickMathTM equations, or simply communicate it back to SCADA Ethernet Communications Patented Dual-Algorithm LTC Condition MonitoringTM Patented Sensorless LTC Position MonitoringTM Patented Load Pickup CoolingTM Event and Data Logging Monitor With Flexibility GIC Detection & Mitigation QuickMathTM QuickMathTM allows you to take full control of your monitoring through easily programmable logic. x x 2 - Math Functions: +, - , x, ÷, e , ln x, y , x , √, 1/x, ( ) - Perform Comparisons: =, >, <, ≥, ≤, ≠ - Program Your Own Condition-Based Assessment Criteria Including Loss of Life. - Automatic LTC Voltage Control - Create Your Own Set Points - Up to 16 User Equations - Up to 32 Comparison Evaluations - Include the Following Directly into QuickMath: Liquid and Winding Temperatures Analog Inputs Aux CT Inputs Constants Quantifiable Detection of Core Saturation 3 Levels of Alarm: Minor, Major, & Critical Large Split-Core Hall-Effect Sensor - Accommodates up to a 4 inch bus bar U.S. & Foreign Patents Pending Built-In Annunciator User Programmable Names & Targets Events Log with User Selected Events Time Synchronization via DNP Test Mode Interactively test set points using temperature and current ramps E-mail Notifications Receive e-mail notifications for user-customizable events Web-Based GUI Visualize Your Transformer’s Health Ethernet Monitor EVERYTHING related to Transformer Health, including Dissolved Gas Analysis Data, Moisture, Bushing Monitor Health and more. Use that data directly in QuickMathTM equations, communicate it back to SCADA, or simply view it through real-time remote access via a Browser-Based GUI. Ethernet Simultaneously Supports DNP 3.0 or MODBUS TCP/IP Automatic E-Mail Notifications Secure HTML Browser-Based GUI Access for: Data logging and Event Data Annunciation Settings View/Edit File Transfer Browser-Based Graphical User Interface For Monitoring, Annunciation, Settings, File Transfer, and Data Log Additional Communication Options Dedicated Fiber for DNP 3.0 or MODBUS Wired RS-485 for DNP 3.0 or MODBUS RS-232 Serial Communications Direct Fiber Winding Temps Built-In Function Buttons Real-Time Winding Hotspot The 8 built-in function buttons allow replacement of switches normally found in the transformer control cabinet for manual fan or tap changer control Real-Time Dynamic Loading Comprehensive LTC Condition Based Assessment Apply: Dual-Algorithm LTC Condition MonitoringTM along with Sensorless LTC Position MonitoringTM for comprehensive LTC Condition Monitoring. The true value of this feature is realized through reliable predictive maintenance of your LTCs Permits No calibration or maintenance High dielectric strength Fired Phosphor Tipped Fiber Rated for use at 765 kV Compatible with existing Phosphor tip fiber installs Up to 8 fiber capable Please see the ECLIPSE DFWT Datasheet for more details Advanced Power Technologies Additional Specifications Enclosure & Dimensions: 8.028 W x 4.882 H x 6.40 D Alodyne Aluminum Front Panel Dimensions: 8.378 W x 5.686 H Power Supply Input Operating Range: 38 VDC to 290 VDC or 120 VAC +/- 10%, 10 Watts Max Operating Temperature Range: -50 °C to +85 °C, 95% Relative Humidity (non condensing) Temperature Measurement Accuracy: Avg error over entire measurement range ± 1 °C. Absolute error at any temperature ± 1.5 °C for temperatures within the range of 23°C - 160°C. Below 23 ˚C the error is ± 3.5 °C. Output Contact Rating: 30 amps make for 250 msec, 8 amps continuous at 250VAC. Optically Isolated Inputs: Operates from 38 to 290 VDC or 24 VAC to 260 VAC. External wetting voltage required. Alarm Contact Rating: 0.4 amp continuous at 290 VDC (NEMA), 0.15 amp continuous at 290 VDC (Panel) Analog Output: Selectable, 0 to 1 mA or 4 to 20 mA. Maximum load 10,000 Ohms (0 to 1mA), 510 Ohms (4 to 20 mA). Analog Input: 0 to10 VDC or -5 to +5 VDC, Accuracy +/- 1% Auxiliary CT Inputs: 0 to 50 Amps RMS ± 3.5 % of full scale, High-Speed Channels can derive up to the 8th Harmonic Communications Interfaces: Front Panel Mounted RS-232 DB-9 Null Modem Interface Ethernet: 10/100 Base-T metallic interface with transformer isolation of 1,500 Volts AC RMS in accordance with IEEE/ANSI 802.3 Current Measurement Range: 0 to 50 A Surge Withstand/Fast Transient: Relay outputs and station battery inputs: ANSI C37.90.1 www.AdvPowerTech.com EMI Withstand: ANSI C37.90.2 215 State Route 10, Building 2 Electrostatic Discharge: IEC 801-2 Rev. 20140505 Copyright 2014 Advanced Power Technologies, LLC U.S. Patent No.: 6714022, 6222714, 7323852, 7417411 and Patents Pending Randolph, NJ 07869 Phone: (973) 328-3300 Fax: (973) 328-0666