AdvancedPower Technologies ECLIPSE HECT TM Monitor With ConfidenceTM For Monitoring GIC on Transformer Neutral Rugged Sealed Split Core Hall Effect CT DIN Rail Mount Hall Effect CT Interface with 420 mA Analog Output Split Core HECT ASSY with 1000123 Mtg Plate HINGE 1000213 MOUNTING BRACKET 0.125 ALUMINUM YELLOW CHROMATE 7.80 Ø 0.196 TYP 4 PLACES 0.50 120.00 4 COND 20AWG EPDM CABLE 2.00 5.40 R 1.93 6.00 R 1.93 2.00 Ø 0.26 TYP 3 PLACES 0.31 2.69 2.87 1.27 0.20 0.63 LATCH 8.40 1.98 1.13 HECT Interface 6.28 ZERO Ordering Part Numbers: ECLIPSE HECT-001: Hall Effect Transducer Interface with Split Core CT Advanced Power Technologies 3.551 ALARM ECLIPSE HECT 5.1182 in. ACTIVE 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 ECLIPSE HECT-002: Hall Effect Transducer Interface with Solid Core CT 1000213: POWER CHASSIS GROUND HALL EFFECT RSCT 232 4-20 mA NO CONNECTION TOP VIEW Split Core Hall Effect CT Mounting Bracket Spare Parts: ECLIPSE HECT-000: Hall Effect Transducer Interface 2.264 57100200150: Split Core Hall Effect CT SIDE VIEW Specifications Power Supply Input Operating Range: 38 VDC to 290 VDC or 120 VAC +/- 10%, 2 Watts DC Max Operating Temperature Range: -50 °C to +85 °C, 95% Relative Humidity (non condensing) Analog Output: 4 to 20 mA. Maximum load 550 Ohms Communications Interfaces: RS-232 3 Wire Interface (Rx, Tx, Ground) Current Measurement Range: -500 to +500 Amps DC Current Measurement Accuracy: +/- 2.8 % Full Scale Current Measurement Resolution: 0.1 Amps DC Attenuation: at 50 Hz & 60 Hz 80 dB maximum and 2nd harmonic above 60 dB minimum Surge Withstand/Fast Transient: IEEE Std C37-90.1-2002. Electrostatic Discharge: IEEE Std C37.90.3 www.AdvPowerTech.com Rev. 20140331 Copyright 2014 Advanced Power Technologies, LLC Patents Pending 215 State Route 10, Building 2 Randolph, NJ 07869 Phone: (973) 328-3300 Fax: (973) 328-0666