ARINC 600 Backshells 527-284 EMI/RFI Shield Sock Backshell with Strain-Relief for Size 2 ARINC 600 Series Connectors 527 284 NF P A 4 B 4 C 3 Dash No. (Table I) (Omit for None) Product Series Basic Number Port (Omit for None) Finish (Table II) Dash No. (Table I) (Omit for None) Connector Designator (TableIII) Port (Omit for None) Dash No. (Table I) (Omit for None Port (Omit for None) Captivated Self-Lockin g Telescoping S crews Braid Sock StRAIN RELIEF WItH BRAID SoCK (447HS557-***) 2.000 (50.8) C Closed 1.500 (38.1) A Thread Port A D Braid Sock B Port B Braid Sock 5.610 (142.5) Braid Sock 1.200 ( 30.5) Min Port C 1.790 (45.5 ) Metric dimensions (mm) are indicated in parentheses. © 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] F-16 ARINC 600 Backshells 527-284 EMI/RFI Shield Sock Backshell with Strain-Relief for Size 2 ARINC 600 Series Connectors TABLE II: FINISH OPTIONS TABLE I: CABLE ENTRY Dash No. 1 2 3 4 5 6 7 8* 9* Shell Size Ref 09 11 13 15 17 19 21 23 25 A THREAD ISO METRIC M12 x 1.0 -6H M15 x 1.0 -6H M18 x 1.0 -6H M22 x 1.0 -6H M25 x 1.0 -6H M28 x 1.0 -6H M31 x 1.0 -6H M34 x 1.0 -6H M37 x 1.0 -6H B Max .980 (24.9) 1.050 (26.7) 1.200 (30.5) 1.300 (33.0) 1.440 (36.6) 1.560 (39.6) 1.690 (42.9) 1.770 (45.0) 1.890 (48.0) C +.031 (0.8) .265 (6.7) .310 (7.9) .390 (9.9) .506 (12.9) .591 (15.0) .661 (16.8) .744 (18.9) .826 (21.0) .896 (22.8) D Min .220 (5.6) .270 (6.9) .350 (8.9) .470 (11.9) .550 (14.0) .620 (15.7) .700 (17.8) .780 (19.8) .850 (21.6) *Consult factory for availability. LF M N NC NF TABLE III: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator Symbol B C* G* J T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Connector Description P All Manufacturer’s Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) P1 P2 Cannon BKAD****322 Series Plug P3 Cannon/Boeing BACC 66 Plug P5 Radiall/Boeing BACC66 Plug P6 Cannon BKAC & BKAE XXX322 Series Environmental Plug Cannon/Radiall Environmental Plug NOTES: 1. Metric dimensions (mm) are indicated in parentheses. © 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] F-17