SERIES 28 HiPer-D® Accessories Low-Profile EMI Backshell, two-piece, elliptical entry, non-environmental 289T005 top entry, 289S005 side entry Lightweight, low profile space-saving two piece backshell fits securely into groove in HiPer-D® connectors. Fits standard HiPer-D® pin and socket connectors (280-018P, 280-019S) and Combo HiPer-D® connectors (280-046P and 280-047S). Terminate cable shield with optional Band-Master™ATS clamping band. Elliptical cable entry provides room for large wire bundles. Machined aluminum alloy or stainless steel backshell consists of two interlocking housings and two 300 series stainless steel screws. Overlapping seam improves EMI shielding performance. Compatible with Glenair Series 77 lipped heat-shrink boots. Non-environmental. Entry Style Ordering Information Sample Part Number Fig. 1 Fig. 2 Top Entry 289T005 Side Entry 289S005 Qwik Ty™ Option Slot Option Qwik Ty™ Fig. 5 Long Side Entry (1) Fig. 6 Short Side Entry (2) E F E-5 Shell Size 1 2 3 4 5 6 -N Finish Shell Size 1 = Shell Size 1 2 = Shell Size 2 3 = Shell Size 3 4 = Shell Size 4 5 = Shell Size 5 6 = Shell Size 6 Entry Size A, B, C or D See Cable Entry Size Table Below Qwik Ty™ Option N = Supplied without Qwik Ty™ T = With Qwik Ty™ Strain Relief (Fig. 3) Slot Option N = Supplied without Slots S = With Slots for Terminating Individual Shields (Fig. 4) EMI/RFI Band N = Supplied without Band K = Supplied with Pre-Coiled Band (600-052-1) Cable Entry Direction Omit for 289T005. Applies only to 289S005. 1 = Cable Exit on Long Side of Shell Keystone (Fig. 5) 2 = Cable Exit on Short Side of Shell Keystone (Fig. 6) In. mm Cable Entry Size SIZE B F E F In. mm In. mm In. mm .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 SIZE A E B ME = Electroless Nickel (RoHS) MT = Nickel-PTFE (RoHS) JF = Cadmium with Yellow Chromate Z2 = Gold (RoHS) Z1 = Passivated Stainless Steel (RoHS) Slots Cable Entry Direction 3 289T005 = Top Entry (Fig. 1) 289S005 = Side Entry (Fig. 2) SLOT Fig. 4 MT Basic Part Number QWIK-TY Fig. 3 289T005 3.63 4.78 6.22 7.39 8.28 9.55 .195 .256 .550 .800 .770 .863 4.95 6.50 13.97 20.32 19.56 21.92 SIZE C E In. .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 In. K E SIZE D F mm N E mm In. .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 F mm 11.13 17.48 28.58 46.05 44.45 47.63 In. mm .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97 Rev. 6-2014 SERIES 28 HiPer-D® Accessories Low-Profile EMI Backshell, two-piece, elliptical entry, non-environmental 289T005 top entry 289T005 DIMENSIONS A E B F QWIK TY OPTION SLOT OPTION .41 (10.4) .06 (1.5) .44 (11.2) .750 (19.05) FILLISTER HEAD, CAPTIVE SCREW HARDWARE OVERLAPPING EMI JOINT .57 (14.4) .25 (6.3) CONNECTOR SHOWN FOR REF. ONLY E Shell Size 1 2 3 4 5 6 E-6 A Max In. mm .880 1.210 1.750 2.400 2.305 2.400 22.35 30.73 44.45 60.96 58.55 60.96 B Max In. mm Entry Size A E F In. mm In. mm Dimensions Entry Size B E F In. mm In. mm .509 .509 .509 .509 .620 .683 .143 .188 .245 .291 .326 .376 .195 .256 .550 .800 .770 .863 12.93 12.93 12.93 12.93 15.75 17.35 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 4.95 6.50 13.97 20.32 19.56 21.92 Entry Size C E F In. mm In. mm .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Entry Size D E F In. mm In. mm .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 11.13 17.48 28.58 46.05 44.45 47.63 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97 Rev. 6-2014 SERIES 28 HiPer-D® Accessories Low-Profile EMI Backshell, two-piece, elliptical entry, non-environmental 289S005 side entry 289S005 DIMENSIONS A Cable Exit Direction B .06 (1.5) DIRECTION 2 CABLE EXITS ON SHORT SIDE OF KEYSTONE SLOT OPTION DIRECTION 1 CABLE EXITS ON LONG SIDE OF KEYSTONE QWIK TY OPTION .44 (11.2) E .41 (10.4) F 1.00 (2.5) FILLISTER HEAD, CAPTIVE SCREW HARDWARE OVERLAPPING EMI JOINT .57 (14.5) .25 (6.4) CONNECTOR SHOWN FOR REF. ONLY (SEE 280-018P & 280-019S) E Shell Size 1 2 3 4 5 6 E-7 A Max In. mm .894 1.218 1.760 2.408 2.297 2.422 22.71 30.94 44.70 61.16 58.34 61.52 B Max In. mm Entry Size A E F In. mm In. mm Dimensions Entry Size B E F In. mm In. mm .550 .550 .550 .550 .654 .716 .143 .188 .245 .291 .326 .376 .195 .256 .550 .800 .770 .863 13.97 13.97 13.97 13.97 16.61 18.19 3.63 4.78 6.22 7.39 8.28 9.55 .143 .188 .245 .291 .326 .376 3.63 4.78 6.22 7.39 8.28 9.55 4.95 6.50 13.97 20.32 19.56 21.92 Entry Size C E F In. mm In. mm .195 4.95 .242 .256 6.50 .480 .375 9.53 .780 .375 9.53 1.260 .485 12.32 1.250 .550 13.97 1.323 6.15 12.19 19.81 32.00 31.75 33.60 © 2013 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • U.S. CAGE code 06324 Entry Size D E F In. mm In. mm .242 6.15 .438 .375 9.53 .688 .375 9.53 1.125 .375 9.53 1.813 .485 12.32 1.750 .550 13.97 1.875 11.13 17.48 28.58 46.05 44.45 47.63 .375 9.53 .375 9.53 .375 9.53 .375 9.53 .485 12.32 .550 13.97 Rev. 6-2014