G3072-408, 10G Avalanche Photodiode, Coplanar Bottom Illuminated APD DATASHEET | SEPTEMBER 2015 FIBER OPTICS EMCORE’s PS-3072-408 10G Avalanche Photodiode, Coplanar Bottom Illuminated Chip is designed for GPON application products. It has high responsivity and low capacitance and is ideally suited for low cost, high-speed data communication designs. This APD is mounted on COB for ease of assembly into receiver modules. Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated for extended periods of time may effect device reliability. Applications GPON Products Parameter Features Advanced Digital Chip Design Wide operating Temperature Range: -40 to +85°C Symbol Operating Temperature Range Top Storage Temperature Range TSTG Forward Current Reverse Current Condition Continuous Min Max Unit - +85 °C Continuous - +100 °C Po Continuous - 50 mA Vr Continuous - 2 mA High Responsivity: 0.7A/[email protected] Low Capacitance: 0.25pF Max Uniform performance across all chips Chip Electrical/Optical Performance Characteristics at 25°C Telcordia Technologies™ 468 Compliant Min Typ Max Unit Condition Responsivity 0.7 - - A/W λ=1550 nm, M=1 Breakdown Voltage 25 30 38 mW Id=10 μA Parameter RoHS Compliant - 20 100 nA M=9 7.0 - - mW/mA Chip capacitance - 0.2 0.25 pF M=9 M=9, f=1 MHz Temperature Coefficient of Vbr - 0.055 - V/ C Total Dark Current 3 dB Cutoff Frequency o Inside TO can | REV 2015.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. G3072-408, 10 Gb/s Avalanche Photodiode, Coplanar Bottom Illuminated APD DATASHEET | SEPTEMBER 2015 FIBER OPTICS Outline Drawing Ordering Information Part Number: G3072-408 | REV 2015.09 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.