Datasheet

G1013-406, 2.5G Avalanche Photodiode (APD)
Bare Die
DATASHEET | SEPTEMBER 2015
FIBER OPTICS
EMCORE’s PS-G1013-406, 2.5G Avalanche Photodiode (APD) Top Illuminated
APD Chip is designed for GPON ONU and 2.6 Gb/s applications. It has high
responsivity and low capacitance with low noise equivalent power and is ideally
suited for low cost, high-speed data communication designs.
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated
for extended periods of time may effect device reliability.
Applications
GPON Products
Parameter
Symbol
Condition
Min
Max
Operating Temperature Range
Top
Continuous
-40
+85
°C
Storage Temperature Range
TSTG
Continuous
-40
+85
°C
Po
Continuous
-
5
mA
-
Continuous
500
-
V
Forward Current
Features
ESD-susceptibility*
Unit
Advanced Digital Chip Design
Wide operating Temperature Range:
-40 to +85°C
High Responsivity: [email protected],
[email protected]
Low Capacitance: 0.5pF Max
Uniform performance across all chips
* Based on human-body model of R = 1500 Ohms and C = 100 pF. In general, ESD precautions
should be taken to avoid damage to the device.
Chip Electrical/Optical Performance Characteristics at 25°C
Specified characteristics apply for 25°C at beginning of life (BOL), unless noted
otherwise.
Telcordia Technologies™ 468 Compliant
Parameter
RoHS Compliant
Min
Typ
Max
Responsivity
0.8
0.9
0.9
1.0
-
Breakdown Voltage
Unit
Condition
A/W
λ = 1310 nm, M = 1
λ = 1550 nm, M = 1
40
48
53
V
IDark = 10 mA
Dark Current
-
10
50
nA
Vr=0.9Vb mA
APD Capacitance
-
0.35
0.5
pF
Vr=0.9Vb, f = 1 MHz
High Frequency Cutoff
2
-
-
GHz
RL = 50 Ω, 3 < M < 10,
200 MHz
Bandwidth Flatness
-1
-
+1
dB
RL = 50 Ω, 3 < M < 10,
0.2 < F < 8 GHz
-
1 x 10
W/√Hz
L = 1550 nm, M = 10
Noise Equivalent Power
Vbr Temperature Coefficient
3 x 10
-
-14
0.105
-
-13
o
V/ C
| REV 2015.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
G1013-406, 2.5G Avalanche Photodiode (APD)
Bare Die
DATASHEET | SEPTEMBER 2015
FIBER OPTICS
Outline Drawing
Ordering Information
Part number: G1013-406
| REV 2015.09
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.