TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors Backlighting LED in Ø 3 mm Tinted Non-Diffused Package FEATURES • • • • • • • • • 19231 DESCRIPTION The TLV.420. series was developed for backlighting. Due to its special shape the spatial distribution of the radiation is qualified for backlighting. To optimize the brightness of backlighting a custom-built reflector (with scattering) is required. Uniform illumination can be enhanced by covering the front of the reflector with diffusor material. This is a flexible solution for backlighting different areas. High light output Wide viewing angle Categorized for luminous flux Tinted clear package Low power dissipation Low self heating Rugged design High reliability Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Backlighting of display panels, LCD displays, symbols on switches, keyboards, graphic boards, and measuring scales • Illumination of large areas e.g. dot matrix displays PRODUCT GROUP AND PACKAGE DATA • • • • Product group: LED Package: 3 mm backlighting Product series: standard Angle of half intensity: ± 85° PARTS TABLE PART COLOR LUMINOUS FLUX (mlm) MIN. TYP. MAX. at IF (mA) WAVELENGTH (nm) MIN. TYP. MAX. at IF (mA) FORWARD VOLTAGE (V) MIN. TYP. MAX. at IF (mA) TECHNOLOGY GaAsP on GaP TLVH4200 Red 10 55 - 15 612 - 625 10 - 2.4 3 20 TLVH4201 Red 40 - 125 15 612 - 625 10 - 2.4 3 20 GaAsP on GaP TLVS4200 Soft orange 10 70 - 15 598 - 611 10 - 2.4 3 20 GaAsP on GaP TLVY4200 Yellow 10 30 - 15 581 - 594 10 - 2.4 3 20 GaAsP on GaP TLVG4200 Green 10 30 - 15 562 - 575 10 - 2.4 3 20 GaP on GaP TLVP4200 Pure green 4 20 - 15 555 - 565 10 - 2.4 3 20 GaP on GaP TLVP4201 Pure green 16 30 - 15 555 - 565 10 - 2.4 3 20 GaP on GaP ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) TLVH4200, TLVH4201, TLVS4200, TLVY4200, TLVG4200, TLVP4200, TLVP4201 PARAMETER TEST CONDITION SYMBOL VALUE VR 5 V Tamb ≤ 60 °C IF 30 mA tp ≤ 10 μs IFSM 1 A PV 90 mW Reverse voltage (1) DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature t ≤ 5 s, 2 mm from body Thermal resistance junction/ambient UNIT Tj 100 °C Tamb -40 to +100 °C Tstg -55 to +100 °C Tsd 260 °C RthJA 400 K/W Note (1) Driving the LED in reverse direction is suitable for a short term application Document Number: 83057 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLVH4200, TLVH4201, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. TLVH4200 φV 10 55 - UNIT mlm TLVH4201 φV 40 - 125 mlm Luminous flux IF = 15 mA Dominant wavelength IF = 10 mA λd 612 - 625 nm Peak wavelength IF = 10 mA λp - 635 - nm Angle of half intensity IF = 10 mA ϕ - ± 85 - deg Forward voltage IF = 20 mA VF - 2.4 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLVS4200, SOFT ORANGE PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous flux IF = 15 mA TLVS4200 φV 10 70 - mlm Dominant wavelength IF = 10 mA λd 598 - 611 nm Peak wavelength IF = 10 mA λp - 605 - nm Angle of half intensity IF = 10 mA ϕ - ± 85 - deg Forward voltage IF = 20 mA VF - 2.4 3 V IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Reverse voltage Junction capacitance OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLVY4200, YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Luminous flux IF = 15 mA TLVY4200 φV 10 30 - mlm Dominant wavelength IF = 10 mA λd 581 - 594 nm Peak wavelength IF = 10 mA λp - 585 - nm Angle of half intensity IF = 10 mA ϕ - ± 85 - deg Forward voltage IF = 20 mA VF - 2.4 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLVG4200, GREEN PARAMETER TEST CONDITION PART TLVG4200 SYMBOL MIN. TYP. MAX. UNIT mlm Luminous flux IF = 15 mA φV 10 30 - Dominant wavelength IF = 10 mA λd 562 - 575 nm Peak wavelength IF = 10 mA λp - 555 - nm Angle of half intensity IF = 10 mA ϕ - ± 85 - deg Forward voltage IF = 20 mA VF - 2.4 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance Document Number: 83057 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) TLVP4200, TLVP4201, PURE GREEN PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT TLVP4200 φV 4 20 - mlm TLVP4201 φV 16 30 - mlm Luminous flux IF = 15 mA Dominant wavelength IF = 10 mA λd 555 - 565 nm Peak wavelength IF = 10 mA λp - 555 - nm Angle of half intensity IF = 10 mA ϕ - ± 85 - deg Forward voltage IF = 20 mA VF - 2.4 3 V Reverse voltage IR = 10 μA VR 6 15 - V VR = 0 V, f = 1 MHz Cj - 50 - pF Junction capacitance LUMINOUS FLUX CLASSIFICATION GROUP LUMINOUS FLUX (mlm) STANDARD MIN. P 4 MAX. 8 Q 6.3 12.5 R 10 20 S 16 32 T 25 50 U 40 80 V 63 125 W 100 200 X 130 260 Y 180 360 Z 240 480 Note • Luminous flux is tested at a current pulse duration of 25 ms. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups in each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. COLOR CLASSIFICATION GROUP DOM. WAVELENGTH (nm) GREEN YELLLOW MIN. MAX. MIN. MAX. 1 581 2 583 3 585 588 562 565 4 587 590 564 567 5 589 592 566 569 6 591 594 568 571 7 570 573 8 572 575 PURE GREEN MIN. 555 MAX. 559 584 558 561 586 560 563 562 565 0 Note • Wavelengths are tested at a current pulse duration of 25 ms. Document Number: 83057 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 60 50 40 30 20 10 0 0 20 40 60 80 0.6 0.4 0.2 0 590 610 630 650 670 690 λ - Wavelength (nm) 95 10040 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Forward Current vs. Ambient Temperature 1000 10 000 red IF - Forward Current (mA) Tamb ≤ 65 °C t p /T= 0.01 1000 I F - Forward Current (mA) 0.8 100 Tamb - Ambient Temperature (°C) 95 10905 red 1.0 0.02 0.05 100 1 10 0.5 1 0.01 0.2 0.1 0.1 1 0 10° 20° 30° 2 4 6 8 10 VF - Forward Voltage (V) Fig. 5 - Forward Current vs. Forward Voltage Fig. 2 - Forward Current vs. Pulse Length 0° 1 95 10026 t p - Pulse Length (ms) 95 10047 tp/T = 0.001 tp = 10 µs 10 0.1 100 10 100 40° 50° 60° 70° 80° 1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 96 11608 Fig. 3 - Relative Luminous Intensity vs. Angular Displacement for 90 ° Emission Angle ΦV rel - Relative Luminous Flux IV rel - Relative Luminous Intensity 10 red 1 0.1 0.01 1 95 10474 10 100 I F - Forward Current (mA) Fig. 6 - Relative Luminous Flux vs. Forward Current Document Number: 83057 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors 2.4 2.0 soft orange 2.0 ΦV rel - Relative Luminous Flux Φv rel - Relative Luminous Flux red 1.6 1.2 0.8 0.4 1.6 1.2 0.8 0.4 0 95 10473 0 10 20 50 1 0.5 0.2 100 0.1 200 500 I F (mA) 0.05 0.02 t p /T Fig. 7 - Relative Luminous Flux vs. Forward Current/Duty Cycle 0 60 80 100 2.4 red soft orange ΦV rel - Relative Luminous Flux ΦV rel - Relative Luminous Flux 40 Fig. 10 - Relative Luminous Flux vs. Ambient Temperature 1.6 1.2 0.8 0.4 2.0 1.6 1.2 0.8 0.4 I F = 10 mA 0 0 20 0 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10472 96 11600 Fig. 8 - Relative Luminous Flux vs. Ambient Temperature 10 20 50 1 0.5 0.2 100 0.1 200 500 I F (mA) 0.05 0.02 t p /T Fig. 11 - Relative Luminous Flux vs. Forward Current/Duty Cycle 10 100 ΦV rel - Relative Luminous Flux soft orange I F - Forward Current (mA) 20 Tamb - Ambient Temperature (°C) 96 11599 10 1 soft orange 1 0.1 0.01 0.1 0 95 9990 1 2 3 4 V F - Forward Voltage (V) Fig. 9 - Forward Current vs. Forward Voltage 1 5 96 11601 10 100 I F - Forward Current (mA) Fig. 12 - Relative Luminous Flux vs. Forward Current Document Number: 83057 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors 1.2 10 ΦV rel - Relative Luminous Flux soft orange Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 0 570 yellow 1 0.1 0.01 590 610 630 650 670 λ - Wavelength (nm) 95 10324 1 10 I F - Forward Current (mA) 95 10477 Fig. 13 - Relative Intensity vs. Wavelength Fig. 16 - Relative Luminous Flux vs. Forward Current 1.2 2.4 yellow ΦV rel - Relative Luminous Flux yellow 1.0 Irel - Relative Intensity 100 0.8 0.6 0.4 0.2 2.0 1.6 1.2 0.8 0.4 0 0 550 570 590 610 630 650 λ - Wavelength (nm) 95 10039 10 20 50 1 0.5 0.2 95 10476 Fig. 14 - Relative Intensity vs. Wavelength 100 0.1 200 500 I F (mA) 0.05 0.02 t p /T Fig. 17 - Relative Luminous Flux vs. Forward Current/Duty Cycle 1000 1.6 ΦV rel - Relative Luminous Flux IF - Forward Current (mA) yellow yellow 100 tp/T = 0.001 tp = 10 µs 10 1 1.2 0.8 0.4 I F = 10 mA 0 0.1 0 95 10030 2 4 6 8 10 VF - Forward Voltage (V) Fig. 15 - Forward Current vs. Forward Voltage 0 95 10475 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 18 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83057 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors 1.2 1.6 green ΦV rel - Relative Luminous Flux green Irel - Relative Intensity 1.0 0.8 0.6 0.4 0.2 1.2 0.8 0.4 I F = 10 mA 0 0 520 540 560 580 600 0 620 λ - Wavelength (nm) 95 10038 20 Fig. 19 - Relative Intensity vs. Wavelength 40 60 80 100 Tamb - Ambient Temperature (°C) 95 10478 Fig. 22 - Relative Luminous Flux vs. Ambient Temperature 1000 2.4 ΦV rel - Relative Luminous Flux IF - Forward Current (mA) green green 100 tp/T = 0.001 tp = 10 µs 10 1 2.0 1.6 1.2 0.8 0.4 0 0.1 0 2 95 10034 4 6 8 10 VF - Forward Voltage (V) 95 10479 Fig. 20 - Forward Current vs. Forward Voltage 20 50 1 0.5 0.2 100 0.1 200 500 I F (mA) 0.05 0.02 t p /T Fig. 23 - Relative Luminous Flux vs. Forward Current/Duty Cycle 1.2 10 green pure green 1.0 Irel - Relative Intensity ΦV rel - Relative Luminous Flux 10 1 0.1 0.01 1 95 10480 10 100 I F - Forward Current (mA) Fig. 21 - Relative Luminous Flux vs. Forward Current 0.8 0.6 0.4 0.2 0 500 95 10325 520 540 560 580 600 λ - Wavelength (nm) Fig. 24 - Relative Intensity vs. Wavelength Document Number: 83057 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors 100 2.4 pure green ΦV rel - Relative Luminous Flux IF - Forward Current (mA) pure green 10 1 2.0 1.6 1.2 0.8 0.4 0 0.1 0 95 9988 1 2 3 4 5 VF - Forward Voltage (V) 96 11603 Fig. 25 - Forward Current vs. Forward Voltage 20 50 1 0.5 0.2 100 0.1 200 500 I F (mA) 0.05 0.02 t p /T Fig. 27 - Relative Luminous Flux vs. Forward Current/Duty Cycle 2.0 10 pure green pure green ΦV rel - Relative Luminous Flux ΦV rel - Relative Luminous Flux 10 1 0.1 1.6 1.2 0.8 0.4 0 0.01 1 96 11604 10 100 I F - Forward Current (mA) Fig. 26 - Relative Luminous Flux vs. Forward Current 0 96 11602 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 28 - Relative Luminous Flux vs. Ambient Temperature Document Number: 83057 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 TLVH420., TLVS4200, TLVY4200, TLVG4200, TLVP420. www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters C < 0.6 (1.3) 2.4 ± 0.1 AREA NOT PLANE 4.6 ± 0.3 33.08 ± 0.5 3.2 ± 0.3 Ø 3.4 ± 0.15 A Ø 2.95 ± 0.1 2.54 nom. 1.5 ± 0.5 + 0.15 + 0.2 0.5 - 0.1 0.4 - 0.05 technical drawings according to DIN specifications Drawing-No.: 6.544-5268.01-4 Issue: 3; 28.07.14 Document Number: 83057 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 2.1, 14-Oct-14 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000