VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors Power SMD LED PLCC-2 FEATURES • Utilizing latest advanced AlInGaP technology • Available in 8 mm tape • Luminous intensity and color categorized per packing unit • Luminous intensity ratio per packing unit IVmax./IVmin. 1.6 • Thermal resistance R = 400 K/W • ESD-withstand voltage: Up to 2 kV according to JESD22-A114-B • Preconditioning according to JEDEC level 2a • Compatible with reflow, vapor phase and wave solder processes according to CECC 00802 and J-STD-020 • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 19225 DESCRIPTION The VLM.333.. series is an advanced modification of the Vishay VLM.31.. series. It is designed to incorporate larger chips, therefore, capable of withstanding a 50 mA drive current. The package of the VLM.333.. is the PLCC-2. It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy. APPLICATIONS • • • • PRODUCT GROUP AND PACKAGE DATA • • • • Product group: LED Package: SMD PLCC-2 Product series: power Angle of half intensity: ± 60° Traffic signals and signs Interior and exterior lighting Dashboard illumination Indicator and backlighting purposes for audio, video, LCDs switches, symbols, illuminated advertising etc PARTS TABLE PART COLOR LUMINOUS INTENSITY (mcd) at IF (mA) MIN. TYP. MAX. WAVELENGTH (nm) FORWARD VOLTAGE (V) at IF (mA) MIN. TYP. MAX. at IF TECHNOLOGY (mA) MIN. TYP. MAX. VLMS333T2V2-GS08 Super red 355 550 1120 20 626 630 639 20 1.8 2 2.6 20 AlInGaP on Si VLMS333T2V2-GS18 Super red 355 550 1120 20 626 630 639 20 1.8 2 2.6 20 AlInGaP on Si VLMR333U1AA-GS08 Red 450 750 1400 20 619 625 631 20 1.8 2 2.6 20 AlInGaP on Si VLMR333U1AA-GS18 Red 450 750 1400 20 619 625 631 20 1.8 2 2.6 20 AlInGaP on Si VLMK333U2AB-GS08 Amber 560 850 1800 20 611 616 622 20 1.8 2.1 2.6 20 AlInGaP on Si VLMK333U2AB-GS18 Amber 560 850 1800 20 611 616 622 20 1.8 2.1 2.6 20 AlInGaP on Si VLMO333U2AB-GS08 Soft orange 560 950 1800 20 600 605 611 20 1.8 2.1 2.6 20 AlInGaP on Si VLMO333U2AB-GS18 Soft orange 560 950 1800 20 600 605 611 20 1.8 2.1 2.6 20 AlInGaP on Si VLMY333U1AA-GS08 Yellow 450 750 1400 20 583 589 594 20 1.8 2.15 2.6 20 AlInGaP on Si VLMY333U1AA-GS18 Yellow 450 750 1400 20 583 589 594 20 1.8 2.15 2.6 20 AlInGaP on Si ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) VLM.333... TEST CONDITION SYMBOL VALUE Reverse voltage (1) PARAMETER Short term application only VR 5 V DC forward current Tamb 73 °C (400 K/W) IF 50 mA Power dissipation PV 130 mW Junction temperature Tj 125 °C Operating temperature range Tamb - 40 to + 100 °C Storage temperature range Tstg - 40 to + 100 °C RthJA 400 K/W Thermal resistance junction/ambient Mounted on PC board (pad size > 16 mm2) UNIT Note (1) Driving the LED in reverse direction is suitable for a short term application Rev. 1.1, 30-Apr-13 Document Number: 82383 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMS333.., SUPER RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMS333T2V2 IV 355 550 1120 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 626 630 639 nm Peak wavelength IF = 20 mA p - 639 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 18 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMR333.., RED PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMR333U1AA IV 450 750 1400 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 619 625 631 nm Peak wavelength IF = 20 mA p - 632 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 18 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMK333.., AMBER PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMK333U2AB IV 560 850 1800 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 611 616 622 nm Peak wavelength IF = 20 mA p - 622 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 18 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMO333.., SOFT ORANGE PARAMETER Luminous intensity TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMO333U2AB IV 560 950 1800 mcd V/IV - 3 - mlm/mcd Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 600 605 611 nm Peak wavelength IF = 20 mA p - 611 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 17 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.1 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA Rev. 1.1, 30-Apr-13 Document Number: 82383 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) VLMY333.., YELLOW PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. IF = 20 mA VLMY333U1AA IV 450 750 1400 mcd V/IV - 3 - mlm/mcd Luminous intensity Luminous flux/luminous intensity UNIT Dominant wavelength IF = 20 mA d 583 589 594 nm Peak wavelength IF = 20 mA p - 591 - nm Spectral bandwidth at 50 % Irel max. IF = 20 mA - 17 - nm deg Angle of half intensity IF = 20 mA - ± 60 - Forward voltage IF = 20 mA VF 1.8 2.15 2.6 V Reverse current VR = 5 V IR - 0.01 10 μA COLOR CLASSIFICATION DOM. WAVELENGTH (nm) GROUP AMBER SOFT ORANGE MIN. MAX. 1 611 618 2 614 622 YELLOW MIN. MAX. MIN. MAX. 600 603 583 586 3 602 605 585 588 4 604 607 587 590 5 606 609 589 592 6 608 611 591 594 Note • Wavelengths are tested at a current pulse duration of 25 ms. LUMINOUS INTENSITY CLASSIFICATION GROUP CROSSING TABLE LIGHT INTENSITY (mcd) VISHAY OSRAM VLMS333T2V2 LS T67F-T2V2-1-1 STANDARD OPTIONAL MIN. MAX. T 2 355 450 VLMR333U1AA LR T67F-U1AA-1-1 1 450 560 VLMK333U2AB LA T67F-U2AB-24-1 2 560 710 VLMO333U2AB LO T67F-U2AB-24-1 1 710 900 VLMY333U1AA LY T67F-U1AA-36-1 2 900 1120 A 1120 1400 B 1400 1800 U V A Note • Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable. Rev. 1.1, 30-Apr-13 Document Number: 82383 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 100 70 RthJA = 400 K/W 60 1.0 Irel - Relative Intensity IF - Max. Permissible Forward Current (mA) 80 50 40 30 20 amber soft orange yellow 90 red super red 0.8 0.6 0.4 0.2 10 0 0 25 50 75 100 0 540 560 580 600 620 640 660 680 125 Tamb - Ambient Temperature (°C) 16784 Fig. 4 - Relative Intensity vs. Wavelength Fig. 1 - Maximum Permissible Forward Current vs. Ambient Temperature 0° 10° 20° 100 0.9 50° 0.8 60° 70° IF - Forward Current (mA) 40° 1.0 ϕ - Angular Displacement IV rel - Relative Luminous Intensity 30° 0.7 λ - Wavelenght (nm) 22184 yellow soft orange amber red super red 10 80° 1 0.6 0.4 0.2 0 1 95 10319 Fig. 2 - Relative Luminous Intensity vs. Angular Displacement IV rel - Relative Luminous Intensity IF - Forward Current (A) 0.08 tp/T = 0.005 0.05 0.5 0.06 0.04 0.02 0.00 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 17044 101 102 tp - Pulse Length (s) Fig. 3 - Forward Current vs. Pulse Length Rev. 1.1, 30-Apr-13 2 2.5 3 3.5 Fig. 5 - Forward Current vs. Forward Voltage 0.12 0.10 1.5 VF - Forward Voltage (V) 22185 10 yellow soft orange amber red super red 1 0.1 0.01 1 22186 10 100 IF - Forward Current (mA) Fig. 6 - Relative Luminous Intensity vs. Forward Current Document Number: 82383 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. Vishay Semiconductors Δλd - Change Dominant Wavelength (nm) ΔVF - Change of Forward Voltage (mV) www.vishay.com 300 yellow soft orange amber red super red 200 100 0 - 100 - 200 - 300 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) 22187 IV rel - Relative Luminous Intensity super red 0.5 0 - 40 - 20 22188 0 20 40 60 80 soft orange 4 2 0 amber red super red -2 -4 -6 -8 - 40 - 20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) yellow soft orange amber red 1.0 yellow 6 Fig. 9 - Change of Dominant Wavelength vs. Ambient Temperature 2.5 1.5 8 22189 Fig. 7 - Change of Forward Voltage vs. Ambient Temperature 2.0 10 100 Tamb - Ambient Temperature (°C) Fig. 8 - Relative Luminous Intensity vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters technical drawings according to DIN specifications 0.9 1.75 ± 0.1 3.5 ± 0.2 Mounting Pad Layout Pin identification 4 C area covered with solder resist 2.6 (2.8) A 2.2 2.8 ± 0.15 1.2 4 Ø 2.4 1.6 (1.9) 3 + 0.15 Drawing-No.: 6.541-5067.02-4 Issue: 4; 19.07.10 20767 Rev. 1.1, 30-Apr-13 Document Number: 82383 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLMx333..-SERIES) Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component insertion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape. REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS18 (= 8000 PCS.) PREFERRED 10.4 8.4 120° 4.5 3.5 Adhesive tape 13.00 12.75 2.5 1.5 Blister tape Component cavity 62.5 60.0 Identification Label: Vishay type group tape code production code quantity 14.4 max. 321 329 18857 94 8670 Fig. 12 - Reel Dimensions - GS18 SOLDERING PROFILE TAPING OF VLMx333.. IR Reflow Soldering Profile for Lead (Pb)-free Soldering Preconditioning acc. to JEDEC level 2a 3.5 3.1 Anode 300 2.2 2.0 3.6 3.4 8.3 7.7 1.85 1.65 4.1 3.9 1.6 1.4 4.1 3.9 0.25 2.05 1.95 Temperature (°C) Cathode 4.0 3.6 5.75 5.25 max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s max. ramp up 3 °C/s 50 16 025 0 0 50 100 150 Time (s) Fig. 10 - Tape Dimensions in mm for PLCC-2 200 REEL PACKAGE DIMENSION IN MILLIMETERS FOR SMD LEDS, TAPE OPTION GS08 (= 1500 PCS.) 2.5 1.5 5s 250 13.00 12.75 63.5 60.5 Identification Label: Vishay type group tape code production code quantity TTW Soldering (acc. to CECC00802) 300 Temperature (°C) 4.5 3.5 300 Fig. 13 - Vishay Lead (Pb)-free Reflow Soldering Profile (acc. to J-STD-020) 10.0 9.0 120° 250 max. 2 cycles allowed 19885 235 °C to 260 °C first wave 200 lead temperature second full line: typical wave dotted line: process limits ca. 200 K/s 150 100 °C to 130 °C ca. 2 K/s 100 2 K/s ca. 5 K/s 50 forced cooling 0 180 178 Fig. 11 - Reel Dimensions - GS08 Rev. 1.1, 30-Apr-13 0 14.4 max. 948626-1 50 100 150 200 250 Time (s) 94 8665 Fig. 14 - Double Wave Soldering of Opto Devices (all Packages) Document Number: 82383 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLMS333.., VLMR333.., VLMK333.., VLMO333.., VLMY333.. www.vishay.com Vishay Semiconductors BAR CODE PRODUCT LABEL (example) RECOMMENDED METHOD OF STORAGE Dry box storage is recommended as soon as the aluminum bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available: 106 A H • Storage temperature 10 °C to 30 °C VISHAY • Storage humidity 60 % RH max. 37 B C D E F G 20195 A. Type of component B. Manufacturing plant C. SEL - selection code (bin): e.g.: R2 = code for luminous intensity group 3 = code for color group After more than 672 h under these conditions moisture content will be too high for reflow soldering. In case of moisture absorption, the devices will recover to the former condition by drying under the following condition: 192 h at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or 96 h at 60 °C + 5 °C and < 5 % RH for all device containers or 24 h at 100 °C + 5 °C not suitable for reel or tubes. An EIA JEDEC standard JESD22-A112 level 2a label is included on all dry bags. D. Date code year/week E. Day code (e.g. 1: Monday) L E V E L CAUTION F. Batch no. This bag contains MOISTURE –SENSITIVE DEVICES G. Total quantity H. Company code 2a 1. Shelf life in sealed bag 12 months at <40°C and < 90% relative humidity (RH) DRY PACKING The reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. Aluminum bag Label 2. After this bag is opened devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing (peak package body temp. 260°C) must be: a) Mounted within 672 hours at factory condition of < 30°C/60%RH or b) Stored at <10% RH. 3. Devices require baking before mounting if: a) Humidity Indicator Card is >10% when read at 23°C + 5°C or b) 2a or 2b is not met. 4. If baking is required, devices may be baked for: 192 hours at 40°C + 5°C/-0°C and <5%RH (dry air/nitrogen) or o or 96 hours at 60±5 Cand <5%RH For all device containers 24 hours at 100±5°C Not suitable for reels or tubes Bag Seal Date: ______________________________ (If blank, see bar code label) Note: LEVEL defined by EIA JEDEC Standard JESD22-A113 19786 Example of JESD22-A112 level 2a label Reel ESD PRECAUTION 15973 FINAL PACKING The sealed reel is packed into a cardboard box. A secondary cardboard box is used for shipping purposes. Proper storage and handling procedures should be followed to prevent ESD damage to the devices especially when they are removed from the antistatic shielding bag. Electro-static sensitive devices warning labels are on the packaging. VISHAY SEMICONDUCTORS STANDARD BAR CODE LABEL The Vishay Semiconductors standard bar code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data. Rev. 1.1, 30-Apr-13 Document Number: 82383 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000