Model 1369 Steering Effort Torque Sensor DESCRIPTION Used in automotive or marine applications to measure torsion on a steering arm or steering wheel. The steering effort torque sensor is designed to be bolted to the steering column of a car, truck, bus, boat, or material handling equipment in place of the regular wheel. Position/angle encoding provided via resistive network. Standard capacity ranges of 50 ft-lb, 100 ft-lb, and 200 ft-lb, others available upon request. FEATURES • 50 ft-lb, 100 ft-lb, and 200 ft-lb capacities • < 0.50 % non-linearity and hysteresis • Direct to steering column attachment • True steering torque - feedback for automobiles, trucks, buses, and material handling equipment • Torque to position capability Model 1369 Steering Effort Torque Sensor TYPICAL SYSTEM DIAGRAM PERFORMANCE SPECIFICATIONS Characteristic Measure In-Line Amplifiers (Used with unamplified units only) Torque range 50, 100, 200 lb-ft Non-linearity <0.50 % of rated output Hysteresis <0.50 % of rated output Repeatability ±0.35 % of rated output Output @ rated capacity ±2 mV/V (nominal) Output Amplifier Universal In-Line Amplifiers +/-5 VDC UV +/-10 VDC UV-10 0 +/-5 VDC UBP 4-20mA (3 wire) U3W 4-20mA (2 wire) U2W DIN rail Mount In-Line Amplifiers 0 +/- 5 VDC (3 wire) DV-05 4-20mA (3 wire) DA-05 0 +/- 10 VDC (3 wire) DV10 Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC Power Supply Honeywell In-Line Amplifier Output Input Serial Number For long cable runs or electrically noisy environments an amplified sensor or locally mounted amplifier is often preferred ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 °C to 93 °C [-20 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.002 % of rated output/°F Temperature effect, output ±0.002 % of reading/°F 2003.1 lb. L1 L2 L3 L4 VALUE CLEAR UP DOWN SETUP MODEL 1369 CHAN TARE ENTER EXIT Display Units SC500 SC2001 GM 7541 SC1000 SC3004 NK 7558 SC2000 HH 7561-PSD Mating Connectors & Cables 023-LW181-037-LF Mating Connector ELECTRICAL SPECIFICATIONS Characteristic Measure Excitation (maximum) 20 Vdc or Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance 700 ohm (nominal) Number of bridges 1 Zero balance ±1.0 % of rated output MOUNTING DIMENSIONS 1/4-20 UNC-28 THD. 1/2 DEEP 8 HOLES EQUALLY SPACED ON 4.375 DIA. B.C. MZ 1/4- 20 UNC-28 THD.-1/2 DEEP SAE-10 SPLINE FITTING 4 HOLES EQUALLY SPACED (10A PERMANENT FIT) FOR RESTRAINING .75 45º .174 .176 .25 1.375 STEERING COLOMN 3.25 APPROX. RECEPT. BENDIX # B PIQZE-12-8P MATING CONN. FURNISHED Mechanical SPECIFICATIONS Characteristic Measure RPM 100 Overload 150 % of rated output For reference only Model Capacity Capacity Protected for Protected for lb-ft Nm overloads to overloads to lb-ft Nm 1369-50 50 68 75 102 1369-100 100 136 150 204 1369-200 200 272 300 408 2 Honeywell • Sensing and Control .125 3.5 1.124 1.125 Ø 4.5 Ø 5Ø 1.023 1.024 Ø Model 1369 Steering Effort Torque Sensor Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to [email protected] WARNING PERSONAL INJURY •DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION •The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. •Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008775-1-EN IL50 GLO June 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.