Specification Oscillator type: Rev.: 1 AXE135M Crystal Oscillator (SPXO) in DIL8 package Parameter Frequency range Frequency stability Overall stability vs. operating temperature range Long term (aging) per year RF output Signal waveform Load Amplitude Symmetry (duty cycle) Oscillator Enable/Disable function (HCMOS and Sine wave output only) Supply voltage VS Current consumption (steady state) (Note 3) Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. min. typ. Date: 2014-04-04 max. Unit Condition 60 50 800 MHz MHz MHz HCMOS Sine wave PECL / LVDS ppm ppm (Note 2) Option 3 & 4 0.1 10 1 ±20 to ±100 ±10 to ±50 See tables 1 & 2 ±3 ppm Sine wave HCMOS/TTL PECL LVDS 50 Ω 15 pF or 2 TTL 50 Ω + Bias 0 dBm +10 dBm According to relevant Logic Standard 40 60 % 45 55 % Enable: Pin 1 High or Open Disable: Pin 1 Low 3.15 3.3 3.45 V 4.75 5.0 5.25 V 15 ~ 30 mA 25 ~ 100 mA 25 ~ 100 mA 12.7x12.7x5.1 max. 4 Tube or Pallet mm g Option 2 = “S” Option 2 = “H” Option 2 = “P” Option 2 = “L” Option 2 = “S” Option 2 = “H” Option 2 = “P” or “L” Option 2 = “S” / 3.3 V Option 2 = “S” / 5.0 V Option 2 = “H”, “P”,“L” Option 2 = “H” Option 2 = “P”, or “L” VH ≥ 2.0 V VL ≤ 0.8 V Option 1 = “3” Option 1 = “5” Option 2 = “S” Option 2 = “H” Option 2 = “P” or “L” IEC 60679-3 CO 21 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Overall tolerance includes initial tolerance, stability over temperature, pushing, pulling and vibration Depending on frequency and supply voltage All combinations of options might not be available. Please consult factory Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Storage Temperature -0.5 -55 VS + 10% +105 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXE135M Rev.1 Drawing D2 Page 1(3) Unit Condition V °C VS to GND ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Frequency stability vs. temperature Option 3 10 15 20 30 50 Stability [ppm] ±10 ±15 ±20 ±30 ±50 Table 1 Lower Temperature Option 4 T [°C] 0 0 1 -10 2 -20 3 -30 4 -40 Upper Temperature Option 4 T [°C] A +50 B +60 C +70 D +75 E +80 F +85 Table 2 Ordering Code Option 1 Option 2 Option 3 [Supply Voltage] [RF output] [Stability] AXE135M 3 or 5 S, H, P, L Table 1 Example: AXE135M-5-S-10-1B_Rev.1 – 10.000 MHz Model Option 4 [Temperature range] Table 2 Revision Frequency [MHz] Rev.1 10.000 Enclosure drawing Pin connections Sine wave and HCMOS Output: Pin # 1 2 3 4 Symbol OE GND RF OUT Vs Function Output Enable/Disable Ground RF Output Supply Voltage PECL and LVDS Output: Pin # 1 2 3 4 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXE135M Rev.1 Drawing D2 Page 2(3) Symbol N.C. or Comp OUT GND RF OUT Vs Function No connection or Complementary RF Output Ground RF Output Supply Voltage ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Handling and Testing Parameter Procedure Handling and Testing Processing Source Application Note AXAN-011 Application Note AXAN-012 Parameter Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant IEC60749-26 IEC60749-27 Yes Yes www.axtal.com www.axtal.com Condition HBM MM No No 2000 V 200 V Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 1 D1 D2 01.10.2012 04.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Environmental conditions updated, editorial changes AXE135M Rev.1 Drawing D2 Page 3(3) Author Checked BN HH BN HH ww.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]