AP3S - Abracon

SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
AP3S
Moisture Sensitivity Level (MSL) –
This product is Hermetically Sealed and
not Moisture Sensitive -MSL = N/A: Not Applicable
FEATURES:
• Per formance comparable to fixed frequency oscillator
• Lowest peak-to-peak jitter
• Low supply current
• Short lead time
• Suitable for mass production
• Alternative to long lead-time XO's
ELECTRICAL SPECIFICATIONS:
Parameters
Frequency Range
Minimum
Typical
Maximum
Vdd = 3.3V
Vdd = 2.5V
Vdd = 1.8V
1
1
11
-------------
200
166
110
Vdd = 1.8V
1
Operating Temperature
Storage Temperature
Overall Frequency Stability*
Vdd = 3.3V
Supply Voltage (Vdd)
Vdd = 2.5V
Vdd = 1.8V
Vdd = 3.3V
Input Current
Vdd = 2.5V
Vdd = 1.8V
Symmetry****
Vdd = 3.3V
Rise and Fall Time
(Tr/Tf)**
Vdd = 2.5V
Vdd = 1.8V
Output Load:
ABRACON IS
ISOISO
9001
9001:2008
/ QS 9000
CE RTIFIED
Pb RoHS
Compliant
-----
-10
-----55
-----100
----2.97
3.30
2.25
2.50
1.62
1.80
------------------------------------------------------------------------------------------------45
50
--------(Left blank if standard)
-------------------------------------------------
10
15
20
22
25
8
10
15
15
6
8
2
55
3
2
4
3
5
4
15
| | | | | | | | | | | | |
For Small
Quantities,
Delivery Time
is 1-5 days
Units
MHz
10.999
+60
+150
+100
3.63
2.75
1.98
3.2 x 2.5 x 1.2mm
°C
°C
ppm
V
Notes
In-house programming
small quantity only
(< 1,000pcs)
Contact Abracon for mass
production quantity
See options
See options
Standard
Vdd option 1
Vdd option 2
1MHz ≤ F< 30MHz
30MHz ≤ F< 75MHz
75MHz ≤ F< 133MHz
133MHz ≤ F < 166MHz
166MHz ≤ F < 200MHz
mA
1MHz ≤ F< 30MHz
30MHz ≤ F< 75MHz
75MHz ≤ F< 133MHz
133MHz ≤ F < 166MHz
1MHz ≤ F< 30MHz
30MHz ≤ F< 75MHz
75MHz ≤ F< 133MHz
%
ns
pF
@ 1/2Vdd
1MHz ≤ F < 10MHz
10MHz ≤ F
1MHz ≤ F < 10MHz
10MHz ≤ F
1MHz ≤ F < 10MHz
10MHz ≤ F
CMOS
Revised: 09.16.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
| |
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
AP3S
Pb RoHS
Compliant
3.2 x 2.5 x 1.2mm
| | | | | | | | | | | | |
ELECTRICAL SPECIFICATIONS:
Parameters
Output Voltage
Minimum
Typical
Maximum
VOL
-----
-----
0.33
VOH
2.97
-----
-----
VOL
-----
-----
0.25
VOH
2.25
-----
-----
VOL
-----
-----
0.18
VOH
1.62
-----
-----
Start-up Time
Tri-state function (Stand-by)
Standby current
--------2.0
"1" (VIH > 0.7*Vdd) or Open: Oscillation
"0" (VIH < 0.3*Vdd) : Disable
--------15
Units
Notes
Vdd = 3.3V
V
Vdd = 2.5V
Vdd = 1.8V
ms
----uA
-----
-----
40
ps
Standard frequencies***
(Reference only. Please contact Abracon for
each frequencies.):
-----
-----
200
ps
Other frequencies
Reference only
Please contact Abracon
Aging:
-3.0
-----
+3.0
ppm
Period jitter Peak to Peak
@+25°C First year
* Inclusive of calibration @25°C, operating temperature range, input voltage variation, load variation, aging, shock, and vibration.
For ±20ppm, inclusive of calibration @25°C, operating temperature range, load variation, shock, and vibration.
** Transition times are measured between 10% and 90% of Vdd with an output load of 15 pF.
*** 4.0, 6.0, 8.0, 12.0, 13.0, 16.0 19.2, 20.0, 24.0, 26.0, 32.0, 38.4, and 40.0MHz
**** Only 40/60% is available for certain frequencies. Please contact Abracon when ordering.
TEST CIRCUIT:
ABRACON IS
ISOISO
9001
9001:2008
/ QS 9000
CE RTIFIED
Revised: 09.16.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
| |
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
AP3S
Pb RoHS
Compliant
3.2 x 2.5 x 1.2mm
| | | | | | | | | | | | |
OPTIONS & PART IDENTIFICATION:
AP3S
Supply Voltage
*Blank: 3.3V
1: 2.5V
2: 1.8V
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 14.31818MHz
-
MHz -
Operating Temp.
I: 0°C ~ +50°C
E: -20°C ~ +70°C
F: -30°C ~ +70°C
N: -30°C ~ +85°C
L: -40°C ~ +85°C
Overall Freq. Stability
J(****): ±20ppm
R: ±25ppm
K: ±30ppm
C: ±50ppm
Tri-state pin
**Blank: OE
***B: Power Down
Packaging
Blank: Bulk
T: Tape & Reel
(1k/reel)
T3: Tape & Reel
(3k/reel)
* 3.3V is standard
** OE: Tri-state the output buffer
*** PDB: Tri-state the output buffer and shut off the oscillator, <10µA when PDB enabled.
**** Available for -10 to +60°C, I, or E temp options only. Contact ABRACON for EJ or LR options. (Availability limited)
OUTLINE DRAWING:
Pin
1
2
3
4
Function
Tri-State
GND/Case
Output
Vdd
Note: Recommend using an approximately 0.01uF
bypass capacitor between PIN 2 and 4.
Dimensions: inches (mm)
ABRACON IS
ISOISO
9001
9001:2008
/ QS 9000
CE RTIFIED
Revised: 09.16.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
| |
SMD CMOS PROGRAMMABLE CRYSTAL OSCILLATOR
AP3S
Pb RoHS
Compliant
3.2 x 2.5 x 1.2mm
| | | | | | | | | | | | |
REFLOW PROFILE
TAPE & REEL:
T= Tape and reel (1,000pcs/reel)
T3= Tape and reel (3,000pcs/reel)
Dimensions: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
ABRACON IS
ISOISO
9001
9001:2008
/ QS 9000
CE RTIFIED
Revised: 09.16.11
Visit www.abracon.com for Terms & Conditions of Sale
30332 Esperanza, Rancho Santa Margarita, California 92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
| |