Electronic Components 75 Ohm Connectors Customer Support Locations AMERICAS 100 New Wood Road Watertown, CT 06796 Tel: 860.945.0206 Toll Free: 800.683.7666 Fax: 860.645.0303 Cannon 75 Ohm Connectors ASIA Unit 901 & 912, West Tower, Shun Tak Center 168-200 Connaught Road Central, Hong Kong Tel: +852.2732.2720 Fax: +852.2732.2919 EUROPE Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311850 Fax: +44.1256.332214 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. 75O-04-07 Cannon 75 Ohm Connectors ITT Electronic Components is a division of the multinational ITT Corporation a $7.5 billion dollar global enterprise. Our extensive portfolio offers the most reliable and cost effective range of interconnect solutions. These innovations have enabled ITT to provide products and technologies to such markets as: • • • • • • • • • • • connector families. In addition we have included a tooling section to simplify and ease the assembly our our connectors both in the factory and for field installations. ITT is an approved manufacturer to ISO 9001 and ISO 14001 with locations worldwide to serve our customers. The Custom Difference Aerospace Broadcast Computers Systems Defense Electronics Geophysical Industrial Automation Medical Electronics Network Systems Telecom Switching Underwater Systems Wireless ITT’s world class engineering teams will work directly with our customers to design and develop cost effective solutions for their applications . In many cases we may modify one of our standard designs to ensure a highly reliable solution where timing is critical. Yet, in those cases where a complete custom interconnect solution is required, ITT will work with our customer’s Engineers to design an interconnect solution which will be cost effective yet highly reliable. Offering the broadest selections of standard and custom RF interconnects, ITT is the one stop source for design, development, manufacturing, and testing of sophisticated connectors. High Performance 75 Ohm Connectors This 75 ohm RF catalog incorporates the most commonly used connectors used in today's routing, switching and transmission equipment. These include the popular Type 43 (SMZ), 1.0/2.3, QT-BNC, and 1.6/5.6 In addition to custom connectors, ITT offers sophisticated custom cable assembly capabilities for a wide range of applications. Our in house expertise translates to our ability to integrate different technologies within a custom cable harness. Quick Reference Selection Guide Frequency Range Impedance Operating Temperature Mating Cycles Mating Method / Coupling Cable Termination Cable Type Body Material Body Finish Packaging: P/N ending with last digit “A” Page Number QT BNC Type 43 (SMZ) 1.0/2.3, Type 54 1.6/5.6 0 to 2 GHz 0 to 3 GHz 0 to 2 GHz 0 to 1 GHz 75 ohm nominal 75 ohm nominal 75 ohm nominal 75 ohm nominal -40˚C - 85˚C 40˚C - 185˚C -40˚C - 85˚C 40˚C - 185˚C -40˚C - 85˚C 40˚C - 185˚C -40˚C - 85˚C 40˚C - 185˚C 500 min 250 min 500 min 500 min Bayonet / Latch Snap-on with posilock latch QT* Quick Termination Crimp/Solder/ QT* Quick Termination Crimp/Solder Crimp/Solder Flexible Flexible Flexible Flexible Phosphor Bronze Brass or Zamak Brass or Zamak Brass Nickel Nickel or Gold Nickel or Gold Nickel or Gold 25 pieces per tray 25 pieces per tray 12 19 see page 18 25 pieces per tray 17 5 Snap-on with push-pull latch Snap-on with screwlock latch Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 2 Cannon 75 Ohm Connectors Table of Contents Type 43 (SMZ) page 5 1.0/2.3 page 12 Balun page 16 QT-BNC page 17 1.6/5.6 page 19 Tooling page 22 New electrical SFP transceiver for STM-1e applications from ITT Designed to comply with the Small Form Factor Pluggable (SFP) industry-standard multi source agreement (MSA), the new Cannon SFP-155E™ electrical transceiver from ITT delivers full duplex STM-1 electrical (155 Mbit/s) SDH transport over coaxial cables and are fully interchangeable with STM-1 optical SFP's. Any system that already supports STM-1 optical can now support STM-1 electrical by using the SFP-155E. More importantly a single circuit card can now support both optical and electrical STM-1 interfaces, reducing system capital and operating costs. The electrical interface is fully compliant with telecom ITU-T G.703 (ES1) recommendations and can be connected using standard DIN 1.0/2.3 75 ohm cable connectors.The SFP-155E enables systems designers to reduce time-to-market at a lower cost, and with full flexibility. Serial identification (EEPROM) in accordance with the SFP MSA is available. Typical applications include Next Generation SDH Add/Drop multiplexers, Optical Edge Devices, MSPP and Switching Systems. Contact Customer Service for more information on this product. Connector/Cable Selection Guide Given here are details of all popular cables with which the connectors in this publication may be used. Cable numbers suitable for use with all cable mounting connectors are given opposite the connector part numbers in the series chose. If the connector style is not shown against your selected cable, please contact Customer Service. Cable Impedance Number (ohms) BT2002* 75 BT2003* 75 BT3002 * 75 M17/29-RG59 75 RD179* 75 RG59/U 75 RG179/U 75 TZC75024 * 75 1694A * 75 734 * 75 735A * 75 0.25/1.3* (mini coax) 75 RA7000* 75 RA8000* 75 1855A * 75 * Double shielded Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 3 Diameter of Jacket 5,30 (.209) 6,90 (.272) 3,55 (.140) 6,27 (.247) 3,07 (.121) 6,25 (.246) 2,67 (.105) 3,55 (.140) 6,99 (.275) 6,10 (.240) 3,51 (.138) 2,10 (.083) 4,50 (.177) 2,75 (.108) 4,04 (.159) Diameter of Outer Conductor (Max) 3,81 (.150) 5,06 (.199) 2,85 (.112) 4,85 (.191) 2,69 (.106) 4,85 (.191) 2,13 (.084) 3,01 (.119) 5,44 (.214) 5,21 (.205) 2,79 (.110) 1,65 (.065) 3,40 (.134) 1,95(.077) 3,51 (.138) Diameter of Diameter of Center Dielectric (Max) Conductor (Nom) 2,45 (.096) 0,60 (.024) 3,70 (.146) 0,61 (.024) 1,95 (.077) 0,31 (.012) 3,81 (.150) 0,56 (.022) 1,68 (.066) 0,30 (.012) 3,81 (.150) 0,58 (.023) 1,68 (.066) 0,30 (.012) 1,95 (.077) 0,31 (.012) 4,57 (.180) 1,02 (.040) 3,89 (.153) 0,79 (.031) 2,01 (.079) 0,41 (.016) 1,35 (.053) 0,25 (.010) 2,80 (.110) 0,60 (.024) 1,45(.057) 0,31 (.012) 2,59 (.102) 0,58 (.023) Cannon 75 Ohm Connectors QT Quick Termination The QT (Quick Termination) 75 ohm connector series was designed to meet the rigorous specifications of the telephony, broadcast and data communications industry. With only two components to handle, our QT connectors are easier to terminate than the current industry standard products while providing reliable electrical and mechanical performance. PATENT PROTECTED QT connectors were first installed on 140Mbit lines in an international telecommunications exchange over 15 years ago, and since that day ITT have supplied over 30 million QT connectors into many of the world’s leading networks. QT = ‘Quick Termination’ of coaxial connectors QT = 3:1 reduction in assembly time QT = No crimping or soldering of the center contact QT = No special tooling required QT = Simplified assembly QT = Fewer wasted parts QT = Reduced tooling maintenance and calibration QT = Pre-assembled center contact QT = A reliable, high pressure, gas tight joint Several innovative concepts and technologies are used in our QT designs. The primary technological feature is a captivated center pin that provides a high pressure gas tight joint of exceptional mechanical and electrical integrity on solid center conductors; termination is achieved without crimping or soldering to the cable’s center conductor. The cable center conductor is terminated to the inner contact within the connector assembly by activating the QT (patented) mechanism using the simple plastic tool provided. Connectors referenced in this catalog with "QT" have this technology. The assembly is completed in 4 simple steps: 1 STEP 1: Strip cable STEP 2: Assemble connector onto cable STEP 3: Press insulator into the body using the plastic tool provided STEP 4: Crimp the ferrule using a standard crimp tool 2 4 3 For high volume terminations, some styles can also be assembled using dedicated hand or pneumatic bench tooling. QT connectors provide large productivity savings, high quality and premium performances... all at a competitive price. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 4 Cannon 75 Ohm Connectors Type 43 (SMZ) ITT’s wide range of Cannon Type 43 / SMZ connectors are extensively used in 75 ohm communication systems and have become the recognized standard in telecommunications in many parts of the world. Designed around the requirements of BS9210 F0022 and draft specifications CECC 122 300, these connectors are designed for field installation and feature the ‘Posi-Lock’ latch to prevent accidental disconnection. A special feature of the Cannon Type 43 / SMZ range is the QT (Quick Termination) technology for cable connectors. Designed to reduce assembly time and loose parts, the QT termination system incorporates a connector body with a pre-assembled center contact, termination is simple with no loose contact to drop or lose. QT provides a reliable gas tight connection between the inner conductor of the cable and connector contact that meets the most stringent industry standards. For PCB connectors a snap fit feature is incorporated into certain styles to hold the connector in position during soldering. Choice of Two Latching Styles – Standard or HDC (High Density) ITT’s Cannon Type 43 / SMZ connectors are available in 2 package sizes, Standard and HDC (High Density). Whilst both configurations have the same interface dimensions and are intermateable, the outer body size of HDC is reduced to facilitate a closer packing density on the equipment or distribution frame. Applications • Switching Equipment • DSX Cross Connects • Base Stations • Routers • Wireless • Telecom • LAN Equipment Features and Benefits High performance gold plated contact areas ensure reliable long term operation Posi-Lock locking mechanisms ensure secure coupling and ease of engagement and separation Designed for the most commonly used telecom cables in North America and Europe Designed for robust and reliable field installation Available for BT standard and HDC distribution frames True 75 ohm characteristic impedance up to 3 GHz (for selected styles) Three-part construction with crimp inner contact and outer ferrule (no soldering required) Most designs require no special tooling PCB Plugs come with offset legs for board locking "Teplock" mounting reduces the time needed for fitting to DDF's QT (Quick termination) technology available for most cable types RoHS compliant part numbers Product offering includes U-links and between series adaptors Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 5 Cannon 75 Ohm Connectors Type 43 (SMZ) Specifications Impedance Frequency Range Working Voltage (dc or ac peak) Proof Voltage (dc or ac peak) Insulation Resistance Contact Resistance* Reflection Coefficient Current Rating MECHANICAL Engagement Forces 75 nominal 0 to 3.0 GHz (some styles limited to 1.0GHz) At sea level, inner conductor to shell = 500 V At sea level = 1500 V 5 G minimum Center contact: 5.0m maximum. Outer contact: 1.0m maximum Refer to CECC122300 1.5 A dc maximum All snap-on, Screw-Lock & Posi-Lock styles except U Links = 60 N (13.5 lbs.) maximum U Links (reduced force snap-on) = 40 N (9 lbs.) maximum Separation Forces All snap-on, Screw-Lock & Posi-Lock styles except U Links = 60 N (13.5 lbs.) max, 8 N (1.8 lbs.) min. U Links (reduced force snap-on) = 40 N (9 lbs.) maximum, 20 N (4.5 lbs.) minimum SMZ Posi-Lock Latch withstand Pull 220 N (50 lbs.) Contact and Insulator Retention 21 N (4.7 lbs.) Materials Body components: Copper or zinc alloy. Center contacts (male/female): Copper alloy. Insulators: PTFE or thermoset plastic. Crimp ferrules: Annealed copper alloy Finish/Plating Center contacts: Gold. Outer contacts: Gold. Other metal parts: Nickel, tin or zinc ENVIRONMENTAL Vibration Severity (a) Frequency range: 10 Hz to 500 Hz. (b) Displacement**: 0,75 (.029). (c) Acceleration**: 2 2 98 m/s (321 ft./s ). (d) Duration: 6 hours. ** Cross over at approx. 60 Hz 2 Shock Severity 490 m/s for 11 ms Impact Severity (free specimens only) 5 impacts at 1m Climatic Catagory 40/100/21 2 Bump 4000 total at 390 m/s Free Fall (U Link only) BS2011: Part 2.1 Ed. Procedure 2. Severity: 50 falls GENERAL Connector Durability 250 matings minimum *Except U Link connectors. See BS9210 F0022 for details. NOTES 1) Values in this specification are typical for this range. Specific connectors may vary. 2) Cannon 75 ohm coaxial connnectors are designed to meet or exceed the requirements of BS9210F0022 where applicable. This specification may be superseded by CECC122 300 and the details listed above are subject to change without notice to comply with changes in these specifications. ELECTRICAL Mating Interfaces PLUG JACK SOCKET PLUG Please note that the description of the 2 halves follow the UK telecom format. In other regions a plug may be called a jack, and a socket may be called a plug. Please take care when choosing your connectors. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 6 Cannon 75 Ohm Connectors Type 43 (SMZ) DDF Crimp Plug Part Number Cable Type Industry Reference 051-127-9739A9A 051-127-9749A9A 051-127-9759A9A 051-127-9769A9A 051-127-9479A9A 051-127-9779A9A BT2001 BT2002 BT2003 BT3002 / TZC75024 RA7000 RG179B/U P43/1GTIS P43/2GTIS P43/3GTIS P43/5GTIS P43/7GTIS P43/4GTIS 33,02 Assembly Instructions: BBAI 1265 (0.356) 9,04 SQ. (1.300) ø 9,14 (0.360) DDF QT Plug Cable Type Industry Reference W51-127-9439A9A BT2003 BT43/3GTIQT W51-127-9459A9A BT3002 / TZC75024 BT43/5GTIQT W51-127-9479A9A RA7000 W51-127-9059A9A RA8000 W51-127-9289A9A NCX W51-127-9049A9A 735A W51-127-9369A9A ST212 / CT1320/735A (alt) W51-127-9789A9A RG59B W51-127-9039A9A 2.5C-2V W51-127-9119A9A 0.25/1.3 (mini coax) ~33.02 (1.300) ø 9,14 (0.360) 9,04 SQ (0.356) Part Number Assembly Instructions: BBAI 1238 Posilock Straight Crimp Socket Part Number Cable Type Industry Reference 051-124-977991A BT2002 S43/2FS 051-124-978991A BT2003 S43/3FS 051-124-979991A BT3002 / TZC75024 S43/5FS 051-124-983991A RG179B/U S43/4FS 051-124-950991A 2.5C-2V 051-124-943991A ST212/CT1320/735A ~30.40 (1.197) ø 10.10 (0.398) Assembly Instructions: BBAI 1265 Posilock Straight QT Socket Part Number Cable Type Industry Reference BT2003 S43/3FQT BT3002/TZC75024 S43/5FQT RA7000 S43/7FQT RA8000 S43/8FQT 735A NCX ST212 / CT1320/735A (alt) RG59U 2.5C-2V 0.25/1.3 (mini coax) 30,40 [ 1.197] ø10,10 [ 0.398] W51-124-953991A W51-124-963991A W51-124-960991A W51-124-947991A W51-124-996991A W51-124-944991A W51-124-943991A W51-124-966991A W51-124-950991A W51-124-999991A Assembly Instructions: BBAI 1238 Dimensions shown in mm (inch) Specifications and dimensions subject to change Contact Customer Service for other cable types www.ittcannon.com 7 Cannon 75 Ohm Connectors Type 43 (SMZ) Posilock Right Angle Socket Industry Reference 051-128-922991A BT2002 S43/2C 051-128-923991A BT2003 S43/3C 051-128-924991A RG179B/U S43/4C 051-128-933991A BT3002/TZC75024 S43/5C 051-128-947991A RA7000 S43/7C 051-128-941991A RG59U 051-128-935991A 735A 23,98 [ 0.944 ] ø 10,10 [ 0.398 ] Cable Type 21,25 [ 0.837 ] 12,93 [ 0.509 ] 9,52 SQ. [ 0.375 ] Part Number Assembly Instructions: BBAI 1041 Contact Customer Service for other cable types 25,40 9,96 (1.000) (0.392) Industry Reference 055-181-9079AZ0 Link 13A (without monitor port) (0.779) Part Number 19,79 Coaxial U Links 12,70 (0.500) 37,08 (1.460) 25,40 9,96 (1.00) (0.392) 12,70 (0.500) 5,08 (0.200) +0,15 ø 1,70 0 (0.067) +0.005 -0.000 4 PLCS. . SQ 2 1,0 40) 0 (0. CS. L 4P HOLE PATTERN 5,08 (0.200) 051-151-9019A9A 3,94 (0.155) 7,92 SQ. (0.312) 5,08 (0.200) 5,08 (0.200) 11,38 (0.448) Part Number ø 0,97 (0.038) Straight PCB Plug +0,18 ø 1,17 0 (0.046) +0.007 -0.000 Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 8 (0.779) Link 13B (with -30dB monitor port) 19,79 055-181-9119AZ0 Cannon 75 Ohm Connectors 13.46 8.38 (0.530) (0.330) 9.53 HEX 5,08 (0.375) (0.200) 3.93 (0.155) 5,08 (0.200) 5,08 (0.200) (0.038) ø 0.97 Part Number 051-151-9029A9A 5,08 (0.200) Straight Screw-lock PCB Plug +0,15 ø 1,70 0 (0.067) +0.005 -0.000 4 PLCS. Type 43 (SMZ) HOLE PATTERN. ø 1,17 +0,18 0 +0.007 (0.046) -0.000 (0. 1 040 .02 S )4 Q PL CS . 5/16-32 UNEF-2A THD +0,15 ø 1,70 0 (0.067) +0.005 -0.000 4 PLCS. Part Number 051-151-9079A9A 5,08 (0.200) 5/16 - 32UNEF-2A 5,08 (0.200) +0,18 ø 1,17 0 (0.046) +0.007 -0.000 13,64 (0.537) 5,56 (0.219) ø 0,97 (0.038) 1,02 (0.040) 4 PLACES. 25,86 (1.018) ø 9,52 (0.375) Straight Bulkhead PCB Plug 8,94 (0.352) A0023384 Panel Mounting Hardware kit (Washer and Lock Nut) 15,75 (0.620) 11,75 (0.463) 14,20 (0.559) 6,30 (0.248) Plug 43/1E +0,18 ø 1,17 0 +0.007 (0.046) HOLE PATTERN. -0.000 3,71 (0.146) Part Number 051-153-9089A9A 5,08 (0.200) 5,08 (0.200) Right Angle PCB Plug +0,15 ø 1,70 0 (0.067) +0.005 -0.000 4 PLCS. HOLE PATTERN ø 0,97 (0.038) 8,00 SQ. (0.315) 5,08 (0.200) 1,02 SQ. (0.040) 4 PLCS. Right Angle Bulkhead PCB Plug with board retaining legs 5,08 (0.200) Part Number 051-153-9119EAA 22,21 (0.874) 18,24 12,50 (0.718) (0.492) 13,41 (0.528) 10,49 (0.413) 6,30 (0.248) B0023382 Panel Mounting Hardware Kit (Spacer, Washer, Lock Washer, Lock Nut) 5,08 (0.200) 5,08 (0.200) 3,10 (0.122) +0,18 ø 1,17 0 (0.046) +0.007 -0.000 1,02 SQ. (0.040) 2,39 (0.094) 7,92 (0.312) 5,08 (0.200) 4 PLACES. +0,15 ø 1,70 0 (0.067) +0.005 -0.000 4 PLCS. 5/16 - 32UNEF-2A ø 0,97 (0.038) HOLE PATTERN. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 9 Cannon 75 Ohm Connectors HDC 43 (SMZ) HDC43 DDF Crimp Plug Cable Type BT2002 BT2003 RG179B/U BT3002/TZC75024 RA7000 Industry Reference HDC43/2GTIS HDC43/3GTIS HDC43/4GTIS HDC43/5GTIS HDC43/7GTIS 33,02 (1.300) 7,94 SQ. (0.313) Part Number 051-127-9849A9A 051-127-9859A9A 051-127-9879A9A 051-127-9869A9A 051-127-9609A9A ø 7,44 (0.293) Assembly Instructions: BBAI 1265 HDC43 DDF QT Plug Industry Reference HDC43/3GTIQT HDC43/5GTIQT HDC43/7GTIQT HDC43/8GTIQT [ 0.293 ] 33.02 (1.300) ø 7,44 Cable Type BT2003 BT3002 / TZC75024 RA7000 RA8000 NCX 735A ST212 / CT1320/735A (alt) 0.25/1.3 (mini coax) 7,94 SQ. [ 0.313 ] Part Number W51-127-9929A9A W51-127-9909A9A W51-127-9609A9A W51-127-9069A9A W51-127-9019A9A W51-127-9029A9A W51-127-9379A9A W51-127-9109A9A Assembly Instructions: BBAI 1238 HDC Posilock Straight Crimp Socket Cable Type BT3002/TZC75024 RA7000 RG179B/U ST212 / CT1320/735A RG179B/U RD179 Industry Reference HDC43/5FS HDC43/7FS HDC43/4FS nickel plated outer contact nickel plated outer contact nickel plated outer contact 30,41 (1.197) ø 8,87 (0.349) Part Number 051-124-937991A 051-124-929991A 051-124-984991A 051-124-9489C9A 051-124-9849C9A 051-124-9859C9A Assembly Instructions: BBAI 1265 HDC Posilock Straight QT Socket Part Number W51-124-937991A W51-124-929991A W51-124-9489C9A Cable Type BT3002/TZC75024 RA7000 ST212 / CT1320 / 735A Industry Reference HDC43/5FQT HDC43/7FQT nickel plated outer contact 30,41 (1.197) ø 8,87 (0.349) Assembly Instructions: BBAI 1238 Contact Customer Service for other cable types Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 10 Cannon 75 Ohm Connectors HDC 43 (SMZ) HDC Coaxial U Links 055-181-9129AZ0 HDC Link 10A (without monitor port) 9,40 (0.370) 19,10 Industry Reference 12,70 (0.500) 10,00 (0.752) (0.394) Part Number 12,70 (0.500) LOOP FOR EXTRACTOR 19,10 (0.752) 10,00 (0.394) 9,40 (0.370) 055-181-9139AZ0 HDC Link 10B (with -30dB monitor port) 23,77 (0.936) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 11 Cannon 75 Ohm Connectors 1.0/2.3 The Cannon 75 ohm 1.0/2.3 connector series are widely used in applications requiring a high density solution and have become a standard in telecommunications in many parts of the world. Designed to meet the requirements of DIN 47247 and CECC 22230, these connectors feature a push/pull coupling mechanism to ensure mating integrity and a snap-on interface for ease of connection. Due to their small size these connectors can be densely packed while providing significant space savings over other 75 ohm connector products. In addition, we offer the Type 54 version of the 1.0/2.3 connector which meets the requirements of BT RC9333. The Type 54 connector combines the 1.0/2.3 interface and push-pull locking system with the termination methods and tooling benefits of the Type 43 (SMZ) connector. Our newest product offering for this connector series is the 1.0/2.3 HD (High Density) connector. By re-engineering the latching mechanism we were able to successful reduce the size of the connector by 20% allowing even greater density than the standard 1.0/2.3 plug. NEW aller Sm 20% Choice of 3 styles – Standard, High Density or Type 54 DIN 1.0/2.3 1.0/2.3 - Type 54 1.0/2.3 HD (High Density) Applications • Switching Equipment • DSX Cross Connects • Base Stations • Routers • Wireless • Telecom • LAN Equipment Features and Benefits Push-pull locking mechanism for secure coupling and ease of engagement and separation Three-part construction with crimp inner contact and outer ferrule (no soldering required) Designed for the most commonly used cables in North America and Europe Ideal for applications requiring a high density solution (space savings) New High Density version with 6.2mm outside diameter Uses industry standard crimp tooling Available in a Type 54 configuration Cable connectors designed for field installation High performance gold plated contact area ensures reliable long term operation Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 12 Cannon 75 Ohm Connectors 1.0/2.3 Mating Interfaces Ø 3,00/3,06 (.118/.120) 1,15 (.045) MAX 1,15/1,75 (.045/.069) Ø 0,47/0,52 (.018/.020) M 5,5 X 0,5 Ø 4,03/4,15 (.158/.163) 5,50 (.216) MAX 5,40/5,70 (.212/.224) 5,90 MAX (.232) 6,50 MAX (.255) 1,15/1,75 (.045/.069) Jack Plug , RC9333 (T54 only) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 13 Cannon 75 Ohm Connectors 1.0/2.3 1.0/2.3 Straight Plug Part Number Cable Type D55-F24-3022GDA ST212 / CT1320/735A (alt) D55-F24-3024GDA ST214 D55-F24-3033GDA BT2003 D55-F24-3035GDA BT3002/TZC75024 D55-F24-3037GDA RA7000 D55-F24-3038GDA RA8000 D55-F24-3049GDA 734A D55-F24-3050GDA 735A D55-F24-3052GDA 0.4/2.42/4.07 D55-F24-3069GDA 1855A / SDV-LFH D55-F24-3079GDA RG179B/U Assembly Instructions: BBAI 1269 ø 7.70 (.303) NEW aller Sm 20% 1.0/2.3 HD (High Density) Plug Cable Type ST212/CT1320/735A (alt) BT3002/TZC75024 735A RG-179B/U 25,05 (0.986) 9,00 (0.354) ø 6,20 (0.244) Part Number D55-F24-3922GDA D55-F24-3935GDA D55-F24-3950GDA D55-F24-3979GDA ~26.00 (1.023) MAX Assembly Instructions: BBAI 1269 ~26.00 (1.023) MAX 1.0/2.3 Straight Bulkhead Jack ø 4.15 (.163) MAX. PANEL 2.50 (.098) Part Number D55-F27-3035GEA D55-F27-3079GEA Cable Type BT3002/TZC75024 RG179B/U ø 7.30 (.287) M 5.5x0.5 Assembly Instructions: BBAI 1281 ~22.00 (.866) MAX 1.0/2.3 Right Angle Plug Part Number D55-F28-3233A9A D55-F28-3235A9A D55-F28-3236A9A D55-F28-3237A9A D55-F28-3050A9A Cable Type BT2003 BT3002/TZC75024 BT5000 RA7000 735A ø 7.70 (.303) 22.00 (.866) MAX Assembly Instructions: BBAI 1041 Contact Customer Service for other cable types 6.00 (.236) 1.0/2.3 Straight PCB Mount Jack ø 0.90 (.035) ø 4.15 (.163) Part Number D51-F51-9002GBA 0.95 (.037) 4 POSNS 11.00 (.433) 14,5 (.571) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 14 Cannon 75 Ohm Connectors Type 54 (1.0/2.3) 0.90 (.035) 4 POSNS 1.0/2.3 Straight PCB Mount Bulkhead Jack Part Number MAX.PANEL 2.00 (.078) M 5.50x0.50 ø 7.25 (.285) 7.00 (.275) D51-F51-9006GBA (with lock nut) 12.00 (.472) 17.50 (.688) 21.00 (.826) ø 0.90 (.035) 0.40 (.015) 3.50 (.137) 3.70 (.145) 1.0/2.3 Right Angle PCB Mount Bulkhead Jacks ø 4.15 (.163) ø 4.15 (.433) 16.50 (.649) 7.40 (.291) Part Number D51-F53-9015GBA 3.20 (.125) 12.00 (.472) 0.80 (.031) 0.80 (.031) M5.5x0.5 5.08 (.200) 3.50 (.137) 0.40 (.015) 3.70 (.145) 16.50 (.649) 1.80 (.070) ø 4.15 (.433) ø 7.3 (.287) 7.40 (.291) 3.20 (.125) 0.80 (.031) 0.80 (.031) 12.00 (.472) M5.5x0.5 5.08 (.200) 23,52 (0.926) 19,56 (0.770) 10,49 (0.413) 6,29 (0.248) 051-F53-9059EAA ø 4,15 MAX. (0.163) D51-F53-9018GBA (with Lock nut) 5/16-32 UNEF-2A 2,92 (0.115) B0023382 Panel Mounting Hardware Kit (Spacer, Washer, Lockwasher, Lock Nut) ø 0,97 (0.038) 12,56 (0.494) Type 54 Straight Plug Part Number D55-F24-3133GDA D55-F24-3135GDA D55-F24-3136GDA D55-F24-3137GDA D55-F24-3138GDA Cable Type BT2003 BT3002/TZC75024 BT5000 RA7000 RA8000 ~35.50 (1.397) MAX Industry Plug 54/3B Plug 54/5B Plug 54/6B Plug 54/7B Plug 54/8B ø 7.70 (.303) Assembly Instructions: BBAI 1265 ~22.00 (.866) MAX Type 54 Right Angle Plug Part Number D55-F28-3233A9A D55-F28-3235A9A D55-F28-3236A9A D55-F28-3237A9A D55-F28-3238A9A Assembly Instructions: Cable Type BT2003 BT3002/TZC75024 BT5000 RA7000 RA8000 BBAI 1041 Industry Reference Plug 54/3A Plug 54/5A Plug 54/6A Plug 54/7A Plug 54/8A ø 7.70 (.303) 22.00 (.866) MAX Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 15 Cannon 75 Ohm Connectors Telecom Baluns ITT’s telecom baluns, for use in ITU G.703 applications, converts between a 120 ohm twisted pair and a 75 ohm coaxial transmission line. These balun connectors have the transformer built into the body, and can be quickly connected to screened or unscreened twisted pair cables through IDC terminations, using a simple assembly tool. The small size allows these connectors to be mounted on a pitch of 10mm. The balun is ideal for use where it is necessary to interconnect equipment with 75 ohm coaxial outputs to a 120 ohm cable distribution system. The balun is only a little larger than the connector that it would replace. Features and Benefits IDC termination Small size Quick and simple termination procedure Meets G.703 standards RoHS 5 Compliant Specifications Coaxial 75 ohm Twisted pair 120 ohm Nominal Impedance Frequency Range 50 kHz - 10 MHz Return loss 75 ohm and 120 ohm 51 - 102 kHz 102 - 2048 kHz 2048 - 3072 kHz 3072 - 10000 kHz CIRCUIT DIAGRAM >18dB >25dB >23dB >16dB 75 OHM COAX. 120 OHM TWISTED PAIR. Conductor 0.5mm copper Insulation 1.4mm Wire Size Balun ~43.00 (1.693) 21.09 (0.830) 9.45 (0.372) Part Number 051-127-9989A9G Type 43 (SMZ) Plug Balun 29,75 (1.171) 16,51 (0.650) 43,00 1.693 051-127-9999A9G HDC 43 (SMZ) Plug Balun 21,09 (0.830) 29,75 (1.171) 9,45 SQ. (0.372) 16,51 (0.650) 055-F24-9019A9G 1.0/2.3 Push-Pull Plug Balun 31,21 (1.229) (.303) 16,51 (0.650) ø 7,70 Assembly Instructions: BBAI 1240 21,09 (0.830) (0.372) 9,45 SQ. 43,00 1.693 Contact Customer Service if the style you require is not listed. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 16 Cannon 75 Ohm Connectors QT-BNC This innovative termination technique provides the QT-BNC with a high pressure, gas tight center conductor joint of exceptional mechanical integrity, without crimping the center contact. The QT-BNC is a 75 ohm pre-assembled connector with an integral central contact and rear crimp ferrule. This connector may be terminated onto cable in under 20 seconds, significantly reducing installation costs. Applications • Central Office Switching • Cross Connect Equipment • Telecommunications Features and Benefits Designed to simplify field installations with less piece parts Optional right angle strain relief boot accessory (show above) Plastic rear cap is color coded for easy identification of cable type Compatible with select competitive crimp tools and die sets Telcordia Audited and Approved 3:1 reduction in assembly time than conventional 3 piece crimp BNC plugs RoHS Compliant Part Numbers Specifications Bump Cable Retention Connector Durability Contact Current Rating Contact/Insulator Retention Contact Resistance Corona Level Coupling Mechanism Retention DWV Frequency Range Impedance Insertion Force Insertion Loss Insulation Resistance Operating Temperature Operating Voltage RF Leakage Shock Termination Resistance (QT Center contact) Vibration VSWR Description Connector Body Insulators Center Contact Male Coupling Nut Crimp Ferrule Spring 4000 total at 390 m/s2 Cable Axial Force Torque M17/29-RG59/ 133 N (30 lbs) min. 0,9 Nm (8.0 in. lbs) 734 type 311 N (70 lbs) min. 0,9 Nm (8.0 in. lbs) 735A type 111 N (25 lbs) min. 0,45 Nm (4.0 in. lbs) BT3002 111 N (25 lbs) min. 0,45 Nm (4.0 in. lbs) 500 mating cycles min. 1.5 A dc max. 22,3 N (5 lbs) min. axial force Outer contact: 1.0 mΩ max.; Braid to body: 1.0 mΩ max. 375 V ac rms min. at 21 km (70,000 ft) 445 N (100 lbs) min. 1500 V ac rms at sea level DC to 2.0 GHz 75Ω nominal 22,3 N (5 lbs) max. 0.2 dB max. at 2 GHz 5000 MΩ min. –40°C to 85°C (–40°F to 185°F) 500 V ac rms at sea level –60 dB typical up to 2 GHz 490 m/s2 for 11 ms 3 mΩ max. (excluding pole resistance) (a) Frequency range from 10 Hz to 500 Hz. (b) Displacement: 0.75 (.029), (c) Acceleration: 98 m/s2,.(d) Duration: 6 hours. 1.2 max. (DC to 1 GHz); 1.3 max. (1 to 2 GHz) Finish 3.5 µM (140 µ in.) Nickel — 1.27 µM (50 µ in.) Gold 2.0 µM (80 µ in.) Nickel 3.8 µM (150 µ in.) Nickel — Material Phosphor bronze Polymers rated to UL 94V-0 Beryllium copper Die Cast, Copper Zinc Alloy Annealed Copper Alloy Stainless Steel Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 17 Cannon 75 Ohm Connectors QT-BNC QT BNC Plug 32,50 (1.280) Ø 14,45 (0.569) 12,70 (0.500) Part Number Cap Color Cable Type W58-124-9019910 Red 735A W58-124-901991A Red 735A W58-124-9019916 Red 735A W58-124-9039910 Yellow RG59B W58-124-9039916 Yellow RG59B W58-124-9069910 Blue 734 W58-124-9069916 Blue 734 W58-124-908991A White BT3002 / TZC75024 W58-124-919991A Red 0.4/2.42/4.07 W58-124-901991S Red 735A QT-BNC w/Boot W58-124-901991R Red 735A QT-BNC w/Boot 735A RTA Boot Only for 735A 33533-47-010006 45.43 25.00 RIGHT ANGLE BOOT. CABLE 30.75 25.00 Assembly Instructions: BBAI 1243 (RG-59) BBAI 1262 (735, 734) BBAI 1268 (BT 3002, TCZ75024) R9 .00 Mating Interface ø 9.85 ± 0.06 ø 1.34 ± 0.02 5.28 MIN. 0.4 ± 0.3 SHOWN IN TERMINATED POSITION. TO END OF CONTACT. Tooling Accessories: Dual Action QT-BNC Hand Crimp Tool QT-BNC Pneumatic Crimp Tool Powered Coaxial Cable Strip Tools and Cutter Heads Please refer to the Tooling section pages 22-25 for part numbers. Last digit in p/n signifies packaging type: 0 = single bag A = 25 pc tray 6 = 100 pc bag S = single R = 100 pc bag RTA Boot = 1000 pc bag Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 18 Cannon 75 Ohm Connectors 1.6/5.6 The Cannon range of 1.6/5.6 connectors are suitable for use in 75 ohm communication systems and have become the recognized standard in telecommunications in many parts of the world. Designed around the requirements of DIN 47295, CECC 22240 and IEC 169-13, these connectors are designed for field installation and feature threaded couplings to ensure mating integrity and a snap-on interface for ease of connection. The range of parts shown in this publication includes plug and jack connectors for a variety of cables. Other cable types and connector styles may be available on request. Applications • Switching Equipment • DSX Cross Connects • Base Stations • Routers • Wireless • Telecom • LAN Equipment Features and Benefits Threaded coupling mechanism to ensure secure connection and snap-on interface for ease of engagement and separation Three-part construction with crimp inner contact and outer ferrule (no soldering required) Designed for the most commonly used telecom cables in North America and Europe Designed for field installation RoHS Compliant Part Numbers Most installations require no special tooling Mating Interfaces 7.00 +0.50 0 6.40 +0.20 0 +0.06 0 ø 0.97 +0.15 0 0.15 MAX. ø 8.10 ø 6.60 +0.09 0 ø 3.80 MAX. 0.25 MIN. ø 4.00 MIN. 3.00 ± 0.10 6.70 MIN. 3.90 +0.40 0 5.50 MAX. M9 x 0.5 THREAD. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 19 Cannon 75 Ohm Connectors DIN1.6/5.6 ELECTRICAL Impedance Frequency Range Voltage Rating* Insulation Resistance Contact Resistance 75 nominal 0-1 GHz At sea level =330 Vrms 10G minimum Inner contact = 4 m maximum Outer contact: 2 m maximum Reflection Coefficient* With f = 0.1 GHz = 0.02 maximum With f = 0.1-0.5 GHz = 0.04 maximum With f = 0.5-1.0 GHz = 0.10 maximum MECHANICAL Withdrawal force inner female contact Withdrawal force inner male contact Insertion force between jacks and plugs Withdrawal force between jacks and plugs Materials Finish/Plating ENVIRONMENTAL GENERAL Temperature Connector Durability Standards 0.5N (0.11 lbs) minimum 1.7N (0.38 lbs) minimum Screw types: 12N (2.7 lbs) maximum. Push-pull type: 20N (4.5 lbs) maximum Screw types: 22N (4.9 lbs) minimum. Push-pull type: 20N (4.5 lbs) maximum Body and nuts: Brass. Inner male contact: Brass Inner ferrule contact and outer male contact: Beryllium copper. Insulators: PTFE Crimp ferrules: Annealed copper alloy. Contact surfaces: Gold over nickel. Female bodies: Gold over nickel. Male bodies: Nickel or silver. Nuts and crimp ferrules: Nickel -40˚C to 85˚C 500 matings minimum CECC 22240, DIN 47295, IEC 169-13 *Guideline value only - will depend on cable and connector types Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 20 Cannon 75 Ohm Connectors DIN1.6/5.6 1.6/5.6 Straight Plug ~27.50 (1.082) Part Number D50-A24-3033GDA D50-A24-3035GDA D50-A24-3037GDA Cable Type BT2003 BT3002/TZC75024 RA7000 9.00 (.354) Assembly Instructions: BBAI 1245 ~29.50 (1.161) 1.6/5.6 Straight Bulkhead Jack D50-A27-3033GEA D50-A27-3035GEA D50-A27-3037GEA BT2003 BT3002/TZC75024 RA7000 9.00 (.354) M9.00x0.50 Assembly Instructions: BBAI 1245 24.00 10.00 (.393) 5.00 (.196) 1.6/5.6 Right Angle Plug D50-A28-3133GKA D50-A28-3135GKA D50-A28-3137GKA (.944) BT2003 BT3002/TZC75024 RA7000 ø 10.40 (.409) 16.00 (.629) Assembly Instructions: BBAI 1247 9.00 (.354) 10.00 (.393) 1.6/5.6 Right Angle Bulkhead Jack D50-A30-3233GBA D50-A30-3235GBA D50-A30-3237GBA 26.30 (1.035) M 9.00 x 0.50 5.00 (.196) BT2003 BT3002/TZC75024 RA7000 PANEL 2.00 . (.078) MAX 16.00 (.629) Assembly Instructions: BBAI 1247 14.50 (.570) 9.00 (.354) Contact Customer Service for other cable types Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 21 Cannon 75 Ohm Connectors Tooling Ferrule Crimp tools T1025 Crimp tool frame only Ferrule Crimp Tool Die Sets for T1025 T1025/5 Hex Die 4.52mm (.178) A/F T1025/8 Hex Die 6.81mm (.268) A/F T1025/9 Hex Die 3.84mm (.151) A/F T1025/10 Hex Die 5.41mm (.213) A/F T1025/36 Hex Die 4.3mm (.169) A/F K26293 3 Way Hex Die, 2.67mm (.105),3.25mm (.128),4.52mm (.178) A/F Note; Contact Customer Service for availability on other die sets Ferrule Crimp Tool 050-000-0020210 Crimp tool frame only Ferrule Crimp Tool Die Sets for 050-000-0020210 050-000-0020010 Die set 3.25mm (.128) and 5.41mm (.213) A/F 050-000-0020011 Die set 3.84mm (.151) and 5.18mm (.204) A/F 050-000-0020012 Die set 4.52mm (.178) and 6.48mm (.255) A/F Note; Contact Customer Service for availability on other die sets Center Contact Crimp Tools 050-000-0030070 12 point center pin indent AFMSP-76 T4519 8 point center pin indent crimp tool MH800 GB109 Center Contact Crimp Tool without Positioner 995-0001-584 8 point center pin indent crimp tool M22520/2-01 Center Contact Positioner for 995-0001-584 T4831 Positioner for 1.6/5.6 contacts T4868 Positioner for BNC contacts T4852 Positioner for 1.0/2.3 contacts Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 22 Cannon 75 Ohm Connectors Tooling Insertion / Extraction Tools for 1.0/2.3 and Type 54 Connectors T4839 T4889 T4902 Straight tool, length 190mm (7.48) (figure A) Straight and Right Angle Tool, length 190mm (7.48) (figure B) Straight and Right Angle Tool, length 430mm (16.9) (figure B) Fig B DDF Plug Extraction Tools T4653 T4825 Type 43 Extractor Tool 65A HDC43 Extractor Tool Balun Termination Tools T4836 T4837 Type 43 Plug Balun, 1.0/2.3 Plug Balun HDC 43 Plug Balun Lock Nut Assembly Tools T4882 T4840 To be used with 1.0/2.3 connectors To be used with 1.6/5.6 connectors QT-BNC Crimp Tools 050-000-0030210 050-000-0030120 050-000-0030150 QT-BNC Dual Action Crimp Frame Only QT-BNC Dual Action Crimp Tool Frame w/ .178 hex die QT-BNC Dual Action Crimp Tool Frame w/.255 hex die QT-BNC Die Sets 050-000-0030122 050-000-0030152 .178 Hex Die for QT-BNC .255 hex die for QT-BNC QT-BNC Complete Crimp Tool Kit (with case) 050-000-003200S Contents include; carry case, 734 & 735 die sets, crimp tool frame, hand held coax stripper and spare pockets for QT-BNC connectors Calibration Tools (go/no go gauge) for QT-BNC Die Sets 050-000-0030023 050-000-0030043 Fig A .178 hex .255 hex Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 23 Cannon 75 Ohm Connectors Tooling QT-BNC Pneumatic Crimp Machine Pneumatic crimp machine with .178 die set for 735 type cables Pneumatic crimp machine with .255 die set for 734, RG-59 type cables 050-000-0040020 050-000-0040040 QT-BNC Pneumatic Die Sets 050-000-0040022 050-000-0040042 .178 Hex Die for 735 type cables .255 Hex Die for 734, RG-59 type cables Powered Coax Stripper, ITT Port-a-Strip Kit (with case) T0K-000-0000 T0K-000-0001 T0K-000-0004 Contents include; carry case, 734, RG-59 cutting head, power hand driver, rechargeable battery, recharging cord Contents include; carry case, 735 cutting head, power hand driver, rechargeable battery, recharging cord Contents include; carry case, 1855 cutting head, power hand driver, rechargeable battery, recharging cord Contact Customer Service for availability on kits for other cable types. Replacement Cutting Heads for Powered Coax Stripper T00-000-0000 T00-000-0001 T00-000-0009 T00-000-0010 T00-000-0011 T00-000-0012 734, RG-59 Cutting head 735 Cutting head 1855 Cutting head BT3002 RA7000 RA8000 Contact Customer Service for availability on other cable types. Complete Powered Coax Stripper, ITT Port-a-Strip Kit (with case) T0K-000-0002 Contents include; carry case, 734 cutting head, 735 cutting head power hand driver, rechargeable battery, recharging cord, AC, DC power supply Contact Customer Service for availability on kits for other cable types. Power Coax Stripper Accessories TPS-000-0000 TSB-000-0000 TCC-000-0000 AC/DC Power Supply (figure A) Spare rechargeable battery with recharging cord (figure B) Coax cable cutter (figure C) (figure A) (figure B) (figure C) Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 24 Cannon 75 Ohm Connectors Tooling Bench-Top Powered Coax Stripper T0B-000-0000 Designed for high volume coax cable prepping, foot pedal operated. Cutter heads sold separately. Cutting Heads for Bench-Top PoweredCoax Stripper TBC-000-0000 TBC-000-0001 TBC-000-0006 TBC-000-0007 TBC-000-0008 TBC-000-0009 Bench Bench Bench Bench Bench Bench top top top top top top cutting cutting cutting cutting cutting cutting head head head head head head for for for for for for 734, RG-59 cable 735 cable 1855 cable BT3002 cable RA7000 cable RA8000 cable Contact Customer Service for availability on other types of cables. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 25 Cannon 75 Ohm Connectors Product Safety Information THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. Product Warranty ITT Electronic Components, a Division of ITT Corporation manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. “Engineered for life” is a registered trademark of ITT Corporation ©2007. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. Dimensions shown in mm (inch) Specifications and dimensions subject to change www.ittcannon.com 26 Rack & Panel Connectors ITT is the world leader in rack and panel connectors, offering unmatched variety of shell configurations and insert arrangements, materials, plating and contact options. Many of our standard and custom designs meet the stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards. www.ittcannon.com/rackandpanel Circular/Filter/Hermetic Connectors As a world leader in circular, filter and hermetic connectors, ITT can leverage its design and manufacturing expertise to fit virtually any application. Our expertise includes fast positive mating for a wide range of military applications, as well as numerous sizes and contact configuration for various harsh environments. ITT can also meet numerous specs, including NATO and MIL standards. www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics D-Subminiature Connectors Cannon invented D-sub connectors in 1952. Our family of D-Subs now includes combinations of signal, power and RF, as well as severe service sealed connectors. Cannon D-Subs are available with an extensive line of backshells and accessories and are one of the most economical shielded connector solutions available. Qualified to the MIL-DTL-24308 specification. www.ittcannon.com/dsubs Fiber Optic Connectors and Cable Assemblies Cannon fiber optic solutions provide an excellent performance/cost value. Performance can be tailored to the end system, and our use of superior materials and bonding agents provides highly effective solutions. Our wide variety of products includes fiber optic hybrid contacts, multi-channel, rack and panel, and hi-rel assemblies, including MIL and ARINC standard solutions. www.ittcannon.com/fiberoptics Microminiature Connectors Cannon microminiature connectors offer high performance and reliability with exceptional versatility. Available in rectangular, circular and strip configurations for countless applications, many of our connectors meet or exceed applicable requirements of the MIL-DTL-83513 specification. www.ittcannon.com/micro ITT's Electronic Components business (www.ittcannon.com) is an international supplier of connectors, interconnects, cable assemblies, I/O card kits and smart card systems. As a worldwide leader in connector technology for nearly a century, ITT offers one of the industry's broadest product offerings, manufacturing capability worldwide, fast time to market, high volume/high yield capacity, robust design and Value-Based Product Development and an extensive sales and customer support network. Electronic Components 75 Ohm Connectors Customer Support Locations AMERICAS 100 New Wood Road Watertown, CT 06796 Tel: 860.945.0206 Toll Free: 800.683.7666 Fax: 860.645.0303 Cannon 75 Ohm Connectors ASIA Unit 901 & 912, West Tower, Shun Tak Center 168-200 Connaught Road Central, Hong Kong Tel: +852.2732.2720 Fax: +852.2732.2919 EUROPE Jays Close, Viables Estate Basingstoke, Hants, RG22 4BA Tel: +44.1256.311200 Fax: +44.1256.323356 www.ittcannon.com ©2007 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice. 75O-04-07