ca_F1-F45.qxd:Layout 1 2/10/11 8:07 AM Page 1 ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 40 MIL-C-81659 Rack and Panel Filter Connectors TDPX Table ofCutouts Contents Panel TDPXB and TDPXD 1.437 (36.50) 1.720 (43.70) .718 (18.24) CL .720 (18.29) .580 (14.73) 1.781 (45.24) .125 (3.15) RAD. TYP. CL OF INSERT 1.440 (3.66) .750 (19.05) 1.140 (28.96) .260 (6.60) 1.25 (3.18) 1.78 (4.52) .120 (3.05) DIA. 4 HOLES .120 (3.05) DIA. 4 HOLES 2.875 (73.03) - 34 REAR MOUNT TDPXB TDPXD TDPX2 Standard Shell .156 R. TYP. (3.96) 2.062 (52.38) 2.062 (52.38) .120 (3.05) DIA. 8 HOLES 1.031 (26.16) .750 TYP. (19.05) 1.031 (26.16) .120 (3.05) DIA. 8 HOLES CL 2.800 (71.10) .750 TYP. (19.05) 2.700 (68.60) 2.230 (56.60) CL .469 TYP. (11.91) 1.160 (29.50) 1.630 (41.40) .125 R. TYP. (3.18) 1.720 (43.70) 2.840 (72.10) CL .469 TYP. (11.91) .469 TYP. (11.91) - 33 FRONT MOUNT 1.780 (45.20) - 33 REAR MOUNT - 34 FRONT OR REAR MOUNT TDPX2-ARINC ‘B’ Shell 1.437 (36.50) 1.437 (36.50) .125 R. TYP. (3.18) 1.720 (43.70) .718 (18.24) 1.391 (35.33) 2.783 (70.69) 2.460 (62.50) CL CL .718 (18.24) .120 (3.05) DIA. 6 HOLES 1.780 (45.21) FRONT MOUNT .156 R. TYP. (3.96) 1.780 (45.21) - 34B FRONT MOUNT .718 (18.24) CL 3.640 (92.46) 3.120 (79.25) 3.770 (95.76) 2.013 (51.13) 3.740 (95.00) 2.783 (70.69) 1.780 (45.21) .125 R. TYP. (3.18) 2.013 (51.13) Filter .120 (3.05) DIA. 6 HOLES 2.500 (63.50) CL 1.970 (50.04) - 34B REAR MOUNT 1.437 (36.50) .120 (3.05) DIA. 4 HOLES 1.391 (35.33) 1.260 (32.00) -33B FRONT MOUNT TDPX3 and TDPX4 .718 (18.24) CL 2.500 (63.50) .120 (3.05) DIA. 6 HOLES OMIT CENTER HOLES FOR - 33B 1.437 (36.50) CL 4.026 (102.26) CL 2.783 (70.69) .718 (18.24) 1.437 (36.50) .120 (3.05) DIA. 4 HOLES 1.391 (35.33) CL .120 (3.05) DIA 8 HOLES CL .750 TYP (19.05) CL 2.062 (52.38) 1.031 (26.19) 3.740 (95.00) 3.220 (81.79) CL 4.026 (102.26) 1.780 (45.21) 1.260 (30.00) 1.391 (35.33) 2.500 (63.50) CL 2.783 (70.69) F 2.500 (63.50) 1.980 (50.29) .125 R. TYP. (3.18) .120 (3.05) DIA. .930 (23.62) 10 HOLES .120 (3.05) DIA. .930 (23.62) 10 HOLES REAR MOUNT 1.391 (32.33) CL 2.783 (70.69) 1.648 (41.86) 1.648 (41.86) FRONT MOUNT REAR MOUNT Dimensions shown in inches (mm) Specifications and dimensions subject to change F-40 www.ittcannon.com ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 41 ARINC 600 Rack and Panel Filter Connectors TBKAD TBKAD/E connectors represent a major milestone in presenting a new rack and panel connector for support of the aerospace market. Low insertion force contacts. Non-environmental versions. Polarizing posts that are removable from the mating face. Field replaceable inserts for size 22 and power contacts. Field replaceable filter modules with size 22 contacts. Up to 800 size 22 contacts in one connector. Crimp piggy back and pi contacts for filter module. Uses standard DPX crimp, insertion/extraction tooling. Waveguide connections available. High mating forces of pluggable modules in a rack have been reduced by approximately twothirds. Filter adaptations include either single module of tandem (dual) module with crimp piggyback rear release contacts. In the ARINC 600 connector series, size 22 contacts are the only size that utilize the Pos-Align connector construction feature. The hooded socket extends from its receptacle insulator in the filter design. Performance and Material Specifications MATERIALS AND FINISHES Shell BKAD SPECIFICATIONS Material Aluminum Alloy QQ-A-591/A380 Finish Clear chromate QQ-P-416 over cadmium Insulator Contacts Ground Spring Material Thermoplastic N/A Material Copper alloy AA-C-533 Finish Gold over nickel Termination Crimp Material Coper alloy Finish Gold N/A ELECTRICAL DATA (Size #16, Size #20 and Size #22) Filter Description Low Freq. Mid Freq. Std Freq. High Freq. Catalog Indicator L M T H Voltage Rating 200 VDC-120 VAC rms 400 Hz Current Rating (amp DC) 15 amp size 16, 7.5 size 20, 5.0 amp size 22 Insulation Resistance, 2 min. electrification time max. at 25˚C DWV, sea level, with 500 microamps max. charge/discharge 5,000 megohms min. @ 100 VDC Capacitance at 1 KHz 0.1 V rms Picofarads 300V DC size 22 500V DC size 16 & 20 500VDC 500VDC 500VDC 32000 45000 8000 12000 3300 5000 850 1300 Freq. MHz Attenuation per MIL-STD-220 @ 25˚C with no applied voltage or current 0.1 2 min. - - - 1.0 10 min. 2 min. - - 2 16 min. 7 min. 2 min. - 10 40 min. 18 min. 8 min. 2 min. 100 60 min. 55 min. 45 min. 30 min. 500 to 1000 60 min. 60 min. 55 min. 45 min. Pi Pi Pi Pi Filter Type/Construction Consult factory for higher or mixed attenuation values and higher voltage ratings. Filter F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com F-41 ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 42 ARINC 600 Rack and Panel Filter Connectors TBKAD Table HowoftoContents Order TBKA D 2 100 M 4 80 81 * ** FILTER CONNECTOR SERIES CLASS SHELL SIZE CONNECTOR LAYOUT DESCRIPTION CAPACITANCE INDICATOR SHELL STYLE CONNECTOR MOUNTING MODIFIER POLARIZING POSITION SPECIAL MODIFIER FILTER CONNECTOR SERIES SHELL SIZE 1-Max. contact capacity - 125 2-Max. contact capacity - 400 3-Max. contact capacity - 800 TBKA (Per ARINC 600) * * Consult factory for availability. CLASS D - Non-environmental (rear release, crimp contacts) CONNECTOR LAYOUT DESCRIPTION Three digit number contained within the shell layout indicates total number of contacts available Connector Shell Size Layout Shell Cavity Identification A B C D E -060 1 - 60 - -A060 1 60 - - -120 1 60 60 - -100 2 - - 100 -300 2 150 150 - -400 2 150 150 100 -600 3 150 150 - 150 150 -800 3 150 150 100 150 150 F 02-Size 1 receptacle only - less 3 printed circuit board mounting lugs 03-With #4-40 ESMA (#22 NCFMA2-40) clinch nuts CAPACITANCE INDICATOR L - 32,000-45,000 PF M - 8,000-12,000 PF T - 3,300-5,000 PF H -850-1,300 PF SHELL STYLE 3-Plug (rack side) consult factory 4-Receptacle (box side) CONNECTOR MOUNTING MODIFIER 00-Standard design .148 dia. holes 01-With #6-32 ESMA (#12 NCFMA2-62) clinch nuts # of Clinch Nuts - Connector Size 100 1 4 2 6 3 10 Receptacle Connector Size # of Clinch Nuts 1 4 Receptacle 2 6 3 10 08-Size 2 and 3 receptacle only-with #4-40 ESMA (#22 NCFMA2-40) clinch nuts (all mounting holes) 09-Size 2 and 3 receptacle only-with #6-32 ESMA (#12 NCFMA2062) clinch nuts (all mounting holes) 23-with floating eyelets (.048 min. radial float) 4 corner holes per connector Consult factory if other modifications are required. POLARIZING POSITION 01 thru 99 (per ARINC 600) Blank-Polarizing posts or keys not installed but supplied with connector SPECIAL MODIFIER Consult factory Typical Filter Performance Med. Freq. Low Freq. 90 80 70 60 Filter 50 40 30 20 10 0 1.0 10 F Std. Freq. 100 Std. Freq. 1000 Dimensions shown in inches (mm) Specifications and dimensions subject to change F-42 www.ittcannon.com ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 43 ARINC 600 Rack and Panel Filter Connectors TBKAD Table of(Engaging Contents End) Polarization 1 BKA*1 2 3 4 5 6 Dark areas represent post RECEPTACLE SHELL Position CENTER POST RIGHT POST LEFT POST RECEPTACLE BKA*2 CENTER POST RIGHT POST LEFT POST RECEPTACLE BKA*3 CENTER POST Left Post Center Post Right Post Position Center Post Right Post 01 02 03 04 05 4 4 4 4 4 4 4 4 4 4 4 3 2 1 6 51 52 53 54 55 6 6 6 6 1 3 3 3 3 3 2 1 6 5 4 06 07 08 09 10 4 5 5 5 5 4 4 4 4 4 5 4 3 2 1 56 57 58 59 60 1 1 1 1 1 3 3 3 3 3 3 2 1 6 5 11 12 13 14 15 5 5 6 6 6 4 4 4 4 4 6 5 4 3 2 61 62 63 64 65 2 2 2 2 2 3 3 3 3 3 4 3 2 1 6 16 17 18 19 20 6 6 6 1 1 4 4 4 4 4 1 6 5 4 3 66 67 68 69 70 2 3 3 3 3 3 3 3 3 3 5 4 3 2 1 21 22 23 24 25 1 1 1 1 2 4 4 4 4 4 2 1 6 5 4 71 72 73 74 75 3 3 4 4 4 3 3 2 2 2 6 5 4 3 2 26 27 28 29 30 2 2 2 2 2 4 4 4 4 4 3 2 1 6 5 76 77 78 79 80 4 4 4 5 5 2 2 2 2 2 1 6 5 4 3 31 32 33 34 35 3 3 3 3 3 4 4 4 4 4 4 3 2 1 6 81 82 83 84 85 5 5 5 5 6 2 2 2 2 2 2 1 6 5 4 36 37 38 39 40 3 4 4 4 4 4 3 3 3 3 5 4 3 2 1 86 87 88 89 90 6 6 6 6 6 2 2 2 2 2 3 2 1 6 5 41 42 43 44 45 4 4 5 5 5 3 3 3 3 3 6 5 4 3 2 91 92 93 94 95 1 1 1 1 1 2 2 2 2 2 4 3 2 1 6 46 47 48 49 50 5 5 5 6 6 3 3 3 3 3 1 6 5 4 3 96 97 98 99 1 2 2 2 2 2 2 2 5 4 3 2 Contact Arrangements (ReceptaclF-Engaging Face Shown) RIGHT POST LEFT POST Size 1 Sizes 2 & 3 Filter RECEPTACLE 60 60 #22 SHELL CAVITY A or B NOT TOOLED 150 150 #22 SHELL CAVITY A, B, D, or E Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com Left Post F-43 100 100 #22 SHELL CAVITY C or F NOT TOOLED F ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 44 ARINC 600 Rack and Panel Filter Connectors TBKAD Table Contents Size 1of Receptacle Filter Module BKAE SERIES 1.531 (38.89) MAX BKAD/BKAF SERIES 1.221 (31.01) MAX .205 (5.21) * .195 (4.95) 1.010 (25.65) .990 (25.15) .130 (3.30) .120 (3.05) .655 (16.64) .645 (16.38) .125 (3.18) * .105 (2.67) .148_+.003 (3.76_ 0.08)DIA + 4 PLCS MTG HOLES A A 5.465 (138.81) 5.455 (138.56) .135 (3.43) * .115 (2.92) 3.825 (97.16) 3.815 (96.90) 7.455 MAX (189.36) 6.355 (161.42) 6.345 (161.16) B 6.627 (168.33) 6.607 (167.82) B 2.059 (52.30) 2.049 (52.04) 1.313 (33.35) 1.303 (33.10) C C .810 (20.57) .800 (20.32) BKAD/BKAF SERIES 1.317 (33.45) MAX .135 (3.43) .125 (3.18) .188 (4.78) .184 (4.67) BKAE SERIES 1.670 (42.42) .575 (14.60) .565 (14.35) .705 (17.91) .695 (17.65) Retainer Plate * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. Size 2 Receptacle FILTER MODULE 1.810 (45.97) 1.790 (45.47) BKAE SERIES 1.531 (38.89) MAX 1.431 (36.35) 1.421 (36.09) BKAD/BKAF SERIES 1.221 (31.01)MAX 260 (6.60)* 250 (6.35) .655 (16.64) .645 (16.38) 130 (3.30 .120 (3.05) .148_+.003 (3.76 _ 0.08) + DIA. 10 PLCS MTG HOLES .070 (1.78)* .050 (1.27) A 5.335 (136.02) 5.345 (135.76) .135 (3.43)* .115 (2.92) 3.770 (95.76) 3.760 (95.50) B A 6.975 MAX (177.16) 6.627 (168.33) 6.607 (167.82) 2.004 (50.90) 1.994 (50.65) Filter 1.258 (31.95) 1.248 (31.70) .870 (22.10) .850 (21.59) 6.360 (161.54) 6.340 (161.04) B C 2.135 (54.23) 2.125 (53.98) C BKAD/BKAF SERIES 1.317 (33.45) BKAE SERIES 1.670 (42.42) .168 (4.27) .158 (4.01) 1.415 (35.94) 1.405 (35.69) .188 (4.78) .184 (4.67) Retainer Plate * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. F Dimensions shown in inches (mm) Specifications and dimensions subject to change F-44 www.ittcannon.com ca_F1-F45.qxd:Layout 1 2/10/11 8:08 AM Page 45 ARINC 600 Rack and Panel Filter Connectors TBKAD Table Contents Size 3of Receptacle 3.275 (83.18) 3.245 (82.42) 2.891 (73.43) 2.881 (73.18) FILTER MODULE BKAE SERIES 1.531 (38.89) MAX BKAD/BKAF SERIES 1.221 (31.01)MAX 260 (6.60)* 250 (6.35) 130 (3.30 .120 (3.05) 5.335 (136.02) 5.345 (135.76) 1.955 (49.66) 1.945 (49.40) .148 .003 (3.76 _ 0.08) + DIA. 14 PLCS MTG HOLES .655 (16.64) .645 (16.38) .070 (1.78)* .050 (1.27) .135 (3.43)* .115 (2.92) 6.355 (161.42) 6.345 (161.16) 6.975 MAX (177.16) 6.627 (168.33) 6.607 (167.82) 2.004 (50.90) 1.994 (50.65) 1.258 (31.95) 1.248 (31.70) 2.135 (54.23) 2.125 (53.98) 3.770 (95.76) 3.760 (95.50) .168 (4.27) .158 (4.01) .865 (21.97) .855 (21.72) 1.440 (36.58) 1.430 (36.32) 2.875 (73.02) 2.865 (72.77) BKAD/BKAF SERIES 1.317 (33.45) BKAE SERIES 1.670 (42.42) 1.252 (31.80) 1.242 (31.55) .188 (4.78) .184 (4.67) 2.712 (68.88) 2.702 (68.63) Retainer Plate * This dimension indicates distance from centerline of retaining screw to the centerline of first contact cavity. Panel Cutouts .240 (6.10)MAX .191 (4.85) 2 PL .189 (4.80) .030 R (.76) MAX 2 PL 240 (6.10) MAX 6.870 (174.50) MIN 6.870 (174.50) MIN 1.530 (38.86) MIN 191 (4.85) 189 (4.80) 2 PL 1.429 (36.30) 1.423 (36.14) 3 PL .287 R (7.29) MAX 4 PL .240 (6.10) MAX .120 R (3.05) MAX 4 PL 3.65 (9.27) 3.55 (9.02) .930 (23.62) MIN .653 (16.59) .647 (16.43) Size 1 Receptacle 2.200 (55.88) MIN 2.133 (54.18) 2.127 (54.03) .240 MAX (6.10) .365 (9.27) .355 (9.02) .260 (6.60) .230 (5.84) 2 PL .120 R (3.05) MAX 4 PL .287 R (7.29) MAX 8 PL .653 (16.59) .647 (16.43) 2 PLC Size 2 Receptacle .287 R MAX (7.29) 8 PL 240 MAX. (6.10) .030 R MAX (.76) 2 PL .120 R MAX (3.05) 4 PL .180 (4.57) D .166 (4.22) 14 PL .960 (24.38) .930 (23.62) 2 PL 6.870 (174.50) MIN. 2.780 (70.61) 2.20 MAX (55.88) 2.133 MIN (54.18) 2.127 (54.03) .365 (9.27) .355 (9.02) .240 (6.10) MAX 1.953 (49.61) 2 PL 1.947 (49.45) .653 (16.59) 2 PL .647 (16.43) Size 3 Receptacle F Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com .180 (4.57) .166 D (4.22) 10 PL 2.889 (73.38) 3 PL 2.883 (73.23) Filter .180 (4.57) .166 (4.22)D 4 PL 2.780 (70.61) MAX 030 R (.76) MAX 2 PL 6.353 (161.37) 6.347 (161.21) 6.353 (161.37) 6.347 (161.21) 3.000 (76.20) MIN .191 (4.85) .189 (4.80) 3 PL F-45