ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 1 ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 23 ARINC 600 SGA Table of Contents Receptacle SGA Conductive Dust Caps Part Numbers (black) Plug 025-1183-002 Receptacle 025-1185-002 H Plug SGA SGA connectors utilize all the Signal cavity inserts and contacts from the ARINC 600 connector series. It was designed to be used where there are space constraints in which a standard ARINC 600 connector can not be used. ITT’s SGA connector fills the need for a 150 maximum contact connector with a smaller shell design than Shell Size 2 of ARINC 600, and has more contacts available than single gang DPX with 106 Size 22 contacts. Materials and Finishes SGA*D SGA*E SGA*F Specifications Material Aluminum alloy Aluminum alloy Aluminum alloy QQ-A-591/A380 Shell Finish Clear chromate over cadmium Clear chromate over cadmium Clear chromate over cadmium QQ-P-416 Insulator Material Thermoplastic Thermoplastic Thermoset N/A Material Copper alloy Copper alloy Copper alloy QQ-C-533 Finish Gold Gold Gold MIL-G-45204 Termination Crimp Crimp P.C/Wrap Post N/A Grommets/Seals Material N/A Silicone-based Elastomer N/A N/A O-Ring Material N/A Silicone-based Elastomer N/A N/A Contacts How to Order (refer to ARINC 600 [BKA] pages 12-14 for contact information SGA CONNECTOR SERIES SGA (Single Gang ARINC 600) SHELL STYLE 3 - Plug (Rack Side) 4 - Receptacle (Box Side) 4 R F 150 S 00 01 FO CONNECTOR SERIES SHELL STYLE RoHS CLASS CONTACT ARRANGEMENT RoHS version R - RoHS compatible CLASS C - Non-environmental with Grommet only, insulators are not potted into the connector shell. D - Non-environmental (rear relase crimp contacts). E - Environmentally sealed (rear release crimp contacts). F - Non-environmental (front release, printed circuit or wire wrap posts). R - EMI/RFI Protected & Environmentally sealed, 0-ring omitted (plug only). (Reference ITTC Phoenix) CONTACT ARRANGEMENT (See ARINC 600 (BKA) contact arrangements, pages12-14) CONTACT TYPE P - Pin Contacts S - Socket Contacts CONNECTOR MOUNTING MODIFIER Mounting modifiers 00, 03, 06, 14, 15, hole location is .705 basic from connector vertical centerline. 00 - .151 Dia. Mounting holes. 03 - .156 with #4-40 Self-Locking Clinch Nuts (ESNA #22NCFMA2-40) 4 per connector. 06 - .188 Dia. For #6-32 Clinch nuts (ESNA #12NCFMA2-62) 4 per connector. 14 - .137 Dia, Countersunk 82 x .230 Dia., Engaging face of mounting flange. 15 - .137 Dia, Countersunk 82 x .230 Dia., Engaging face of mounting flange. Supplied with slant shield grounding spring. CONTACT TYPE (PIN OR SOCKET) CONNECTOR MOUNTING MODIFIER POLARIZING POSITION CONTACT MODIFIER ROHS finish zinc plate per ASTM-B-633 with trivalent chromate coating Mounting modifiers 05, 07, 08, 09, 10, 11, 12, 13, hole location is .650 basic from connector vertical centerline. 05 - .208 Dia. for Floating Eyelet 07 - .212/.204 Slot 4 places. 08 - .120 Dia. Countersunk 82 x .230 Dia., Engaging face of mounting flange. 09 - .120 Dia. Countersunk 82 x .230 Dia., Rear face of mounting flange. 10 - .120 Dia. Countersunk 100 x .230 Dia., Engaging face of mounting flange. 11 - .120 Dia. Countersunk 100 x .230 Dia., Rear face of mounting flange. 13- .137 Dia. Countersunk 82 x .230 Dia., Rear face of mounting flange. POLARIZING POSITION 01 - 36 Positions. (See Chart page 28) When the last two digits are omitted, the polarizing posts will not be assembled and position number is not stamped on the connector. This allows the user to position the post and stamp the appropriate number on the shell. If the last two digits are "00", polarizing posts are not supplied with the connector. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-23 CONTACT MODIFIER Refer to page 17 for replacement contact part numbers and required termination tooling information. (Blank) - With standard Crimp type Rear release contacts. F0 - Contacts are not supplied with connector (FO not stamped on connector.) SA - Front release .025 Dia. x .150 Solder Post Size 22 Sockets SB - Front release .025 Dia. x .250 Solder Post Size 22 Sockets SC - Front release .025 Dia. x .375 Solder Post Size 22 Sockets SD - Front release .025 Dia. x .500 Solder Post Size 22 Sockets WA - Front release .025 Sq. x .250 (1 Wrap) WB - Front release .025 Sq. x .375 (2 Wrap) WC - Front release .025 Sq. x .500 (3 Wrap) WD - Front release .025 Sq. x .641 (3 Wrap) Rack and Panel Available Rear Release/Rear Removable Front Release/Front Removable Low Insertion force contacts. Both environmental and non-environmentl versions. Polarizing post that are removable from the mating face. Field replaceble inserts. Up to 150 Size #22 contacts per connector. Crimp, coax, twinax, printed circuit and wire wrappable post style contacts. Uses standard ARINC 600, crimp, insertion/ extraction tooling. ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 24 ARINC 600 SGA Plug Shell Dimensions .205 (5.21) .190 (4.83) RAD. 4 Places Rack and Panel H 1.696 (43.08) 1.676 (42.58) .070 (1.78) .050 (1.27) + + + + A1 POSITION DESIGNATOR .470 (11.94) .460 (11.68) 2.335 (59.31) 2.325 (59.06) .265 (6.73) .255 (6.48) 2.860 (72.64) 2.840 (72.14) 1.291 (32.79) 1.287 (32.69) 1.781 (45.24) 1.777 (45.14) .120 (3.05) .098 (2.49) .065 (1.65) .062 (1.57) DIA 1.01 (25.65) .99 (25.15) .185 (4.70) .145 (3.68) .655 (16.64) .620 (15.75) .850 (21.59) .830 (21.08) 1.60 (40.64) MAX. .26 (6.60) .24 (6.10) SCREW, .112-40UNC - 2A, 4 PLACES + .130 (3.30) .120 (3.05) FLANGE + .705* (17.91) .705* (17.91) + + .760* (19.30) .760* (19.30) *APPLIES TO INSERT RETAINING SCREW LOCATION Recommended Panel Cutout .06 (1.52) RAD. 4 PLACES .10 (2.54) X .10 (2.54) 4 PLACES .06 (1.52) RAD. 4 PLACES .156 (3.96( + _ .001 (0.03) DIA. 4 HOLES FOR PRESSED NO. 4 CAPTIVE NUT OR .140 O / (3.56) DIA. FOR LOOSE HARWARE .705 (17.91)* 1.050 (26.67) 1.030 (33.02) 1.760 (44.70) 1.740 (44.20) .705 (17.91)* 1.910 (48.51) 1.890 (48.01) 1.165 (29.59) 1.165 (29.59) *.705 APPLIES FOR 00, 03, 06, 14, 15 MOUNTING MODIFICATIONS *.650 APPLIES FOR 05, 07, 08, 09, 10, 11, 12, & 13 MOUNTING MODIFICATIONS 3.010 (2.990) Dimensions shown in inches (mm) Specifications and dimensions subject to change H-24 www.ittcannon.com ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 25 ARINC 600 SGA Receptacle Shell Dimensions .705* (17.91) 1.01 (25.65) .99 (25.15) 1.657 + _ .010 (42.09 _ + 0.25) .705* (17.91) H .125 (3.18) MAX POLARIZATION KEY EXTENSION .760* (19.30) .26 (6.60) 24 (6.10) 1.784 _ + .010 (45.31 _ + 0.25) 1.972 _ + .010 (50.09 _ + 0.25) .088 (2.24) .068 (1.73) 1.531 (38.89) MAX. .692 (17.58) .668 (16.97) .390 (9.91) .360 (9.14) .061 (1.55) .059 (1.50) 1.791 (45.49) 1.787 (45.39) 1.98 (50.29) 1.96 (49.78) .040 (1.02) - .065 (1.68) X 45 , ALL AROUND .065 (16.51) .055 (13.97) 1.301 (33.05) 1.297 (32.94) 1.49 (37.85) 1.47 (37.34) .089 (2.26) X 45 .067 (1.79) ALL AROUND .070 (1.78) .050 (1.27) RAD. 4 PLACES SCREW, FLH, #4-4OUNC-2A 4 PLACES 1.696 (43.08) 1.676 (42.57) A1 POSITION DESIGNATOR .08 (2.03) X 45 _ +2 2 PLACES .470 (11.94) .460 (11.68) 2.335 (59.31) 2.325 (59.06) .270 (6.86) .250 (6.35) 2.860 (72.64) 2.840 (72.14) Recommended Panel Cutout .310 (7.87) RAD. MAX. 2 PLACES .050 (1.27) RAD. MAX. 4 PLACES .156 _ + .005 (3.96) _ + 0.13) DIA. 4 PLACES .205 (5.21) RAD. MAX 4 PLACES .705* (17.91) .950 (24.13) .920 (23.37) 1.560 (39.62) 1.540 (39.12) .705* (17.91) *.705 APPLIES FOR 00, 03, 06, 14, 15 MOUNTING MODIFICATIONS 2.050 (52.07) 2.030 (51.56) .106 (2.69) X 45 _ +2 2 PLACES Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-25 1.165 (29.59) 1.165 (29.59) 2.740 (69.60) 2.720 (69.09) *.650 APPLIES FOR 05, 07, 08, 09, 11, 12, & 13 MOUNTING MODIFICATIONS Rack and Panel *APPLIES TO INSERT RETAINING SCREW LOCATION .760* (19.30) .130 (3.30) .120 (3.05) .650 _ + .010 (16.51 + _ 0.25) SCREW, FLH, #4-4OUNC-2A 4 PLACES ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 26 Cannon heading Polarization TOP FEMALE POLARIZATION POST TOP FEMALE POLARIZATION KEY CONTACT CAVITY A1 A1 A1 CONTACT CAVITY A1 Rack and Panel H BOTTOM FEMALE POLARIZATION KEY BOTTOM MALE POLARIZATION POST RECEPTACLE (BOX SIDE) Plug (Rack Side) Polarizing Positions 1 2 3 4 5 6 POST KEY Key Post Connector Receptacle Connector Plug Position Top Key Bottom Key Top Post 01 02 1 3 1 4 4 2 Bottom Post 4 1 03 04 2 1 4 4 3 4 1 1 05 06 6 5 4 4 5 6 1 1 07 08 4 3 5 5 1 2 6 6 09 10 2 1 5 5 3 4 6 6 11 12 6 5 5 5 5 6 6 6 13 14 4 3 6 6 1 2 5 5 15 16 2 1 6 6 3 4 5 5 17 18 6 5 6 6 5 6 5 5 19 20 4 3 1 1 1 2 4 4 21 22 2 4 1 4 3 1 4 1 23 24 6 5 1 1 5 6 4 4 25 26 4 3 2 2 1 2 3 3 27 28 2 1 2 2 3 4 3 3 29 30 6 5 2 2 5 6 3 3 31 32 4 3 3 3 1 2 2 2 33 34 2 1 3 3 3 4 2 2 35 36 6 5 3 3 5 6 2 2 Dimensions shown in inches (mm) Specifications and dimensions subject to change H-26 www.ittcannon.com