MX23L12810A 128M-BIT PAGE MODE MASK ROM (TSOP) FEATURES PIN DESCRIPTION Symbol A0~A22 D0~D14 • Bit organization - 16M x 8 (byte mode) - 8M x 16 (word mode) • Fast access time - Random access:100ns (max.) - Page access:25ns (max.) • Page size - 8 words per page • Current - Operating:25mA - Standby:15uA • Supply voltage - 2.7V ~ 3.6V • Package - 48 pin TSOP (12mm x 20mm), Pb-free, RoHS • Temperature - 0°C ~ 70°C • Process - 0.18um D15/A-1 CE# OE# BYTE# VCC VSS NC Pin Function Address Inputs Data Outputs D15 (Word Mode)/ LSB Address (Byte Mode) Chip Enable Input Output Enable Input Word/ Byte Mode Selection Power Supply Pin Ground Pin No Connection PIN CONFIGURATION 48 TSOP (Top View) BYTE# A16 A15 A14 A13 A12 A11 A10 A9 A8 A19 A21 A20 A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 VSS VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC VCC A22 D11 D3 D10 D2 D9 D1 D8 D0 OE# VSS VSS ORDER INFORMATION Part No. MX23L12810ATC-10G MX23L12810ATC-12G Speed 100ns 120ns Package 48 pin TSOP 48 pin TSOP Grade Commercial Commercial Remark Pb-free Pb-free REV. 1.0, APR. 02, 2010 P/N:PM1226 1 MX23L12810A MODE SELECTION CE# H L L L OE# X H L L Byte# X X H L D15/A-1 X X Output Input D0~D7 High Z High Z D0~D7 D0~D7 D8~D15 High Z High Z D8~D15 High Z Mode Word Byte Power Stand-by Active Active Active ABSOLUTE MAXIMUM RATINGS Item Voltage on any Pin Relative to VSS Ambient Operating Temperature Storage Temperature Symbol VIN Topr Tstg Ratings -0.3V to 3.9V 0°C to 70°C -65°C to 125°C DC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 2.7V~3.6V) Item Output High Voltage Output Low Voltage Input High Voltage Input Low Voltage Input Leakage Current Output Leakage Current Operating Current Standby Current (CMOS) Input Capacitance Output Capacitance Symbol VOH VOL VIH VIL ILI ILO MIN. 2.4V 0.7xVCC -0.3V - MAX. 0.4V VCC+0.3 0.8V 5uA 5uA ICC - 25mA ISTB CIN COUT - 15uA 10pF 10pF Conditions IOH = -400uA IOL = 1.6mA 0V, VCC 0V, VCC f=5MHz, CE#=VIL, OE#=VIH all output open CE#>VCC-0.2V Ta = 25°C, f = 1MHZ Ta = 25°C, f = 1MHZ AC CHARACTERISTICS (Ta = 0°C ~ 70°C, VCC = 2.7V~3.6V) Item Read Cycle Time Address Access Time Chip Enable Access Time Page Access Time Output Enable Time Output Hold After Address Output High Z Delay Symbol tRC tAA tCE tPA tOE tOH tHZ 23L12810A-10 MIN. MAX. 100ns 100ns 100ns 25ns 25ns 0ns 20ns 23L12810A-12 MIN. MAX. 120ns 120ns 120ns 25ns 25ns 0ns 20ns Note: 1. Output high-impedance delay (tHZ) is measured from OE# or CE# going high, and this parameter guaranteed by design over the full voltage and temperature operating range - not tested. 2.Operating current is measured under Non-Return to Zero (NRZ) test pattern. P/N:PM1226 REV. 1.0, APR. 02, 2010 2 MX23L12810A AC Test Conditions Input Pulse Levels 0.4V~ 2.4V Input Rise and Fall Times 5ns Input Timing Level 1.5V Output Timing Level 1.5V Output Load IOH (load)=-0.4mA DOUT See Figure IOL (load)=1.6mA C<100pF Note:No output loading is present in tester load board. Active loading is used and under software programming control. Output loading capacitance includes load board's and all stray capacitance. TIMING DIAGRAM RANDOM READ ADD ADD ADD ADD tRC tCE CE# tOE OE# tOH tAA VALID DATA VALID tHZ VALID PAGE READ VALID ADD A3-A22 (A-1),A0,A1,A2 2'nd ADD 1'st ADD tAA DATA 3'rd ADD tPA VALID VALID P/N:PM1226 VALID REV. 1.0, APR. 02, 2010 3 MX23L12810A PACKAGE INFORMATION P/N:PM1226 REV. 1.0, APR. 02, 2010 4 MX23L12810A REVISION HISTORY Revision Description Page Date 0.01 1. Added Note 2 in AC Characteristics P2 DEC/05/2005 2. Modified Input Pulse Levels from 0V~3.0V to 0.4V~2.4V P3 0.02 1. Modified Operating Current from 20mA to 25mA P1,2 JAN/10/2006 2. Added access time:100ns P1,2 0.03 1. Removed access time:90ns P1,2 FEB/15/2006 2. Modified random read timing P3 0.04 1. Modified random read timing P3 APR/07/2006 2. Removed tAH in AC characteristics P2 0.05 1. Added statement P6 NOV/07/2006 1.0 1. Removed "Preliminary" P1 APR/02/2010 P/N:PM1226 REV. 1.0, APR. 02, 2010 5 MX23L12810A Macronix's products are not designed, manufactured, or intended for use for any high risk applications in which the failure of a single component could cause death, personal injury, severe physical damage, or other substantial harm to persons or property, such as life-support systems, high temperature automotive, medical, aircraft and military application. Macronix and its suppliers will not be liable to you and/or any third party for any claims, injuries or damages that may be incurred due to use of Macronix's products in the prohibited applications. Copyright© Macronix International Co., Ltd. 2005~2010. All Rights Reserved. Macronix, MXIC, MXIC Logo, MX Logo, are trademarks or registered trademarks of Macronix International Co., Ltd. The names and brands of other companies are for identification purposes only and may be claimed as the property of the respective companies. For the contact and order information, please visit Macronix’s Web site at: http://www.macronix.com.tw MACRONIX INTERNATIONAL CO., LTD. reserves the right to change product and specifications without notice. 6