LTCC High Temperature Inductors 0.27x0.27 inch size NASCENTechnology, Inc. has developed a series of high temperature, RoHS compliant inductors using low temperature co-fired ceramic (LTCC) ferrite usable to 300°C that feature low profile, rugged packaging, and self shielding characteristics. See individual data sheets for part dimensions. Electrical Parameters at 25 °C unless otherwise noted Part No. No Load † Inductance µH 100 mA Inductance µH 100 mA Tolerance Nominal DC Resistance ohms Rated †† Current mA Saturation Current* mA 85008 15 12 20% 0.40 85012 35 29 25% 0.60 85016 63 48 30% 0.80 250 85077 33 30 25% 0.38 250 350 530 † Tolerance for no load inductance is ±25 % †† Current will cause a 35 °C temperature rise over ambient (measured 20 to 55 °C) * Saturation Current is the current that results in a 35% decrease in inductance over the 100 mA Inductance. Thickness varies by part; the range is 0.032-0.100 in [0.8-2.54 mm] Common termination options (please add option to the end of the part number when inquiring): -A0 Thick film AgPt with side terminations, solderable -B0 Leads, gold plated -C0 Thick film Au, Au wirebonding -D0 Au over Ni, solderable -D1 Au over Ni, Al wirebonding For additional information, contact: Daryl Schofield, General Manager Phone: 605-882-8513, Fax: 605-884-2450, E-mail: [email protected] NASCENTechnology, Inc. 121 Airport Drive, Watertown, SD 57201 www.nascentechnology.com This product is protected under US Patent #6054914, #6198374 and other international patents. Specifications subject to change without notice. 03/13