C1005B-Series Thermal Circuit Protectors Datasheet

2 | C1005B-Series - Introduction
C1005B-Series
THERMAL CIRCUIT PROTECTORS
The C1005B-Series offers the functionality of a switch
and circuit breaker in a single compact package,
which fits an industry standard .500 x 1.125 mounting
hole. This combo device eliminates the need for both
a switch and thermal circuit protector on customer
panels. By using only this multipurpose product,
wiring and assembly costs are greatly reduced, while
at the same time, valuable panel real estate is saved.
The C1005B-Series is available lighted or unlighted, in
a variety of colors, with solder lug or .250 Tabs.
Current ratings range from 7-16 [email protected] and 250
VAC and up to 32 VDC.
Product Applications:
Household and Commercial Appliances
Transportation
Marine
Telecommunications
Power Strips
Audio-visual Equipment
Medical equipment
Power supplies
Generators
Safety Regulatory
Agency Approvals:
UL, CUL, TUV
Product Highlights:
Industry Standard .550 X 1.125 mounting hole
(14mm X 28.6mm)
Š Ratings from 7-16 Amps
Š Standard Reset/Off Legend
Š Aesthetically pleasing Curved Rocker & Angular
Bezel
Š .250 Tabs or Solder Lug Terminations
Š 65°C Max Operating Temperature
Š 1000 AIC Interrupting Capacity
Š 1500 VAC Dielectric Strength
Š 100 megohms at 500 VDC Insulation Resistance
Š Compact Space-saving Envelope
Š UL1077, UL1363, IEC 60934
Š
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com
C1005B-Series - Ordering Scheme | 3
C1005B — 3 B 15 1 B R 3
1
Series
2
3
4
Illumination Termination Current
Rating
1
3
2 ILLUMINATION
2
Non-Lighted
3
Lighted
B
W
C
12
13
14
15
16
R
G
U
T
12 amps
13 amps
14 amps
15 amps
16 amps
Time Delay
CORRECTION FACTOR1
o
o
o
o
o
Black Bezel with white legend
White Bezel with black legend
Gray Bezel with black legend
Red
Green
Blue
Clear
8 LAMP VOLTAGE
3
9
Neon Lamp 125/250 VAC
Non-lighted
Dimensional Specifications: in. [mm]
1.280 [32.5]
OVERLOAD TRIP TIME
100%
NO TRIP
150%
TRIP IN 1 HR.
200%
5 - 35 SEC.
300%
1 - 10 SEC.
400%
.45 - 5.5 SEC.
600%
.1 - 20 SEC.
o
SilverCad Oxide (switch), Silver plated copper (breaker)
SilverCad Oxide (switch & breaker)
Note: RESET OFF Legend is standard.
Notes:
1 Silver cad oxide switch and breaker contacts are available as a special order.
Specify 3 for selection 5
o
8
Lamp
Voltage
7 ROCKER COLOR
4 CURRENTRATING (AMPERES)
07
7 amps
08
8 amps
09
9 amps
10
10 amps
11
11 amps
o
7
Rocker
Color
6 BEZEL LEGEND IMPRINT
3 TERMINATION
A
Solder Lug
B
.250 Tab
o
6
Bezel
Legend
5 CONTACT MATERIAL1
1 SERIES
C1005B
0C
10 C
15 C
18 C
25 C
32 C
40 C
50 C
60 C
5
Contact
Material
x .67
x .72
x .83
x .87
x 1.00
x 1.05
x 1.18
x 1.33
x 1.67
1.125 [28.6]
.669 [17]
.858 [21.8]
PANEL CUT OUT
.550 [14]
.07 [1.79]
.921 [23.4]
.236 [6]
.472 [12]
.0315 [.8]
.394 [10]
.394 [10]
.248 [6.17]
1.102 [28]
.532 [13.5]
Notes:
1 To adjust the breaker ratings for ambient temperature multiply the breaker rating by the factor.
(ex: 5 amp rating at 0°C: 5 x .67 = 3.3 amp.
Select 3 amp rating.)
2500 amps @ 32 VDC only. AIC rating is 1000
amps for AC applications.
*Manufacturer reserves the right to change product specification without prior notice.
60 Johnson Avenue • Plainville, CT 06062–1177 • Phone: (860) 793–9281 • Fax: (860) 793–9231
Email: [email protected] • www.carlingtech.com