1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■Features ● ■Outline Single chip Recommended Solder Pad Top ● Super high brightness of surface mount LED ● Sorting for Iv and Vf @ 5mA of If ● Compact package outline Side (LxWxT) of 1.6mm x 0.8mm x 0.4mm ● Dimension Compatible to IR reflow soldering. Anode ■Applications Bottom ● Backlighting (switches, keys, etc.) ● Marker lights (e.g. steps, exit ways, etc.) ■Absolute Maximum Rating Tolerance:±0.1mm Unit: mm ■Directivity (Ta=25℃) Symbo Item Value WT/BL YG/YL/OR/HR DC Forward Current IF 30 30 mA Pulse Forward Current* IFP 100 100 mA Reverse Voltage VR 5 5 V Power Dissipation PD 100 70 mW Topr -40 ~ +85 Storage Temperature Tstg -40~ +85 Lead Soldering Temperature Tsol 0 Unit l Operating Temperature Cathode 0 ℃ ℃ ℃/5sec 260 - *Pulse width Max 0.1ms, Duty ratio max 1/10 ■Electrical -Optical Characteristics (Ta=25℃ (Ta=25℃) VF (V) Part Number Min. Color Typ. IR(µA) Max. IF=5mA Max. λD(nm) Iv(mcd) Min. Typ. Max. VR=5V Min. Typ. 2θ1/2(deg) Max. Typ. IF=5mA OSWT1608C1A White WT ■ 2.7 2.9 3.2 100 37 74 110 OSBL1608C1A Blue BL ■ 2.6 2.9 3.2 100 9 23 37 465 470 475 120 OSYG1608C1A Yellow green YG ■ 1.7 1.9 2.2 100 6 11 16 565 570 575 120 OSYL1608C1A Yellow YL ■ 1.7 1.9 2.2 100 27 40 71 586 590 592 120 OSOR1608C1A Orange OR ■ 1.7 1.9 2.2 100 18 35 60 600 605 610 120 OSHR1608C1A Red HR ■ 1.7 1.9 2.2 100 18 35 60 620 625 630 120 X=0.27, Y=0.28 120 Note: * Vf tolerance: ±0.05V * Dominant wavelength tolerance: ±1nm * Luminous intensity is NIST reading. Luminous intensity tolerance:±10% LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■ Optical and electrical characteristics TYPICAL ELECTRICAL/OPTICAL CHARACTERISTIC CURVES Relative luminous intensity - If IF-V F YG YL 60 ) A (m50 fI tn40 er ru 30 C dr a 20 rw o10 F BL WT TG O R /H R 0 0.5 1.5 1.0 2.0 2.5 4.0 3.5 3.0 Forw ard V oltage V f (V ) If_Ta tyis ne tn Is uo in m uL ev it lae R 7 6 ) A m 5 @ d ez il a m ro N ( YG YL BL 5 4 WT 3 2 OR/HR TG 1 0 0 10 20 30 40 50 60 Forward current IF(mA) WT 50 ) 40 A m ( Ift 30 ne rr u 20 C dr a 10 w ro F 0 -30 -20 0 20 40 60 80 100 Ambient Temperature Ta (°C) Wavelength Characteristics Ta=25°C OR HR BL TG YG YL 100 yti 80 sn et nI 60 su on i 40 m uL ev 20 it al eR 0 400 450 500 550 Wavelength (nm) 600 650 700 LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm White SMD OSWT1608C1A Ver.A.5 * One delivery would be included 125 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. * The reel of LED shows the number of definition of LEDs on reel label LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm Blue SMD OSBL1608C1A Ver.A.5 * One delivery would be included 72 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm Red SMD OSHR1608C1A Ver.A.5 * One delivery would be included 30 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm Orange SMD OSOR1608C1A Ver.A.5 * One delivery would be included 30 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm Yellow Green SMD OSYG1608C1A Ver.A.5 * One delivery would be included 30 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm Yellow SMD OSYL1608C1A Ver.A.5 * One delivery would be included 40 different ranks of the luminous intensity , wavelength and Vf depend on customer request. * The quantity ratio of the different intensity and wavelength ranks in one delivery is decided by Optosupply. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■ Recommended Soldering Temperature – Time Profile (Reflow Soldering) Surface Mounting Condition In automatic mounting of the SMD LEDs on printed circuit boards, any bending, expanding and pulling forces or shock against the SMD LEDs should be kept min. to prevent them from electrical failures and mechanical damages of the devices. Soldering Reflow -Soldering of the SMD LEDs should conform to the soldering condition in the individual specifications. -SMD LEDs are designed for Reflow Soldering. -In the reflow soldering, too high temperature and too large temperature gradient such as rapid heating/cooling may cause electrical & optical failures and damages of the devices. -We cannot guarantee the LEDs after they have been assembled using the solder dipping method. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 3) Manual Soldering conditions. - Lead Solder Max. 300 for Max. 3sec, and only one time. ℃ - Lead-free Solder Max. 350 for Max. 3sec, and only one time. ℃ - There is possibility that the brightness of LEDs is decreased, which is influenced by heat or ambient atmosphere during reflow. It is recommended to use the nitrogen reflow method. - After LEDs have been soldered, repair should not be done. As repair is unavoidable, a double-head soldering iron should be used. It should be confirmed beforehand whether the characteristics of the LEDs will be damaged by repairing or not. - Reflow soldering should not be done more than two times. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■ Material True green : : White/ Blue/ Yellow green/ Yellow/ Orange/ Red LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■ Taping and Orientation. Quantity: 4,000 units/reel Diameter: 178 mm General Tolerance : ± 0.1 ■ Cautions: 1. After open the package, the LED should be kept at 30°C, 30%RH or less. The LED should be soldered within 24 hours (1 day) after opening the package. 2. Heat generation must be taken into design consideration when using the LED. 3. Power must be applied resistors for protection, over current would be caused the optic damage to the devices and wavelength shift. 4. Manual tip solder may cause the damage to Chip devices, so advised that heat of iron should be lower than 15W with temperature control under 5 seconds at 230-260 deg. C. ( The device would be got damage in re working process, recommended under 5 seconds at 230-260 deg. C) 5. All equipment and machinery must be properly grounded. It is recommended to use a wristband or anti-electrostatic glove when handing the LED. 6. Use IPA as a solvent for cleaning the LED. The other solvent may dissolve the LED package and the epoxy, Ultrasonic cleaning should not be done. 7. Damaged LED will show unusual characteristics such as leak current remarkably increase, turn-on voltage becomes lower and the LED get unlight at low current. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 ■ Reliability Test : Conclusions: The reliability tests were designed to evaluate both package integrity as well as workability of product performance over time. All samples have done well by completed test requirement and passed all the qualification criteria with zero failure. From design standpoint, the package is robust enough to meet its datasheet conditions. Based on the good result shows on the above test, this product is qualified and released for market. LED & Application Technologies http://www.optosupply.com VER A.5 1.6 x 0.8 x 0.4mm SMD OSXX1608C1A Ver.A.5 OPERATION LIFE TEST LUMINANCE RATE CURVE IV% Operating Life Test(If=5mA,Ta=25degC) WT YL 120% BL OR TG HR YG 100% 80% 60% 40% 20% 0% Time(Hours) 0 168 500 1000 *Burn-in condition: 5mA *Projection of Statistical Average Light Output Degradation Performance for LED Technology Extrapolated from OptoSupply QA Dept. Test Data. *According to OptoSupply outgoing Packaged Products Specification *MTBF:50,000hrs, 90% Confidence (A Failure is Any LED Which is Open, shorted or fails to Emit Light) *The Projected Data is Base on The Feature of LED Itself Under Normal Operation Conditions. *Any Improper Circuit Design or External Factors Might Cause a Different Result. LED & Application Technologies http://www.optosupply.com VER A.5