P6CUI-xxxxZ(H30)LF Mainzer Straße 151–153 D-55299 Nackenheim Tel. +49 6135 7026-0 Fax: +49 6135 931070 www.peak-electronics.de [email protected] PM1-SERIES Rev.02-2009 1 Watt Unregulated Dual Separate Output SIP7 Case 1 - 3 kV DC I/O Isolation Low Ripple and Noise The PM1 series P6CUI-xxxxZ(H30)LF is a family of cost effective 1 W dual separate output DC/DC converters. These converters are in an ultra miniature SIP7 case. Devices are encapsulated. High performance features: 1000VDC up to 3000VDC input/output isolation, high efficiency operation, output voltage accuracy of ±3% maximum, input range of ±10% tolerance and low output ripple and noise. All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified Input Specifications Voltage Range Input Filter Input Reflected Ripple Current¹ ± 10% Capacitor 20 mA pk-pk Output Specifications Voltage Accuracy Short Circuit Protection Line Regulation Load Regulation (20% - 100%) Ripple and Noise (20Mhz bandwidth) Temperature Coefficient ± 3% Short Term ± 1.2% / 1% Vin Change ± 10% (3.3 Vout Models: ± 20%) 75 mV pk-pk ± 0.02% / °C General Specifications Efficiency I/O Isolation Voltage (3 sec.) I/O Isolation Capacity I/O Isolation Resistance Switching Frequency Humidity Reliability Calculated MTBF (MIL-HDBK-217F) See Table 1000 VDC (3000 VDC optional)* 60 pF, typ. 1000 MOhm 80 kHz (Variable) 95% rel H > 1.121 Mhrs Physical Specifications Case Material Potting Material Weight Non Conductive Black Plastic (UL94V-0 rated) Epoxy (UL94V-0 rated) ~ 2.3g, typ. Environment Specifications Operating Temperature Maximum Case Temperature Storage Temperature Cooling RoHS Conform -40 to +85°C (ambient) 100°C -40 to +125°C Free Air Convection (10 mm distance required) Soldering 260°C, max. (1.5 mm from case 10s.) PM1-Series – P6CUI-xxxxZ(H30)LF – Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 1/3 Selection Guide Dual Separate Output A) ) ) d (m (mA ad (mA a ) d o a L C ll Lo F)² D Lo t Fu d (u (V No F u ll e (V n ) a t t g e e o n n a r % g t rre rre y( lta or L C ur Vol t Vo t Cu put Cu ie n c acit pu t pu t Inpu In p u In Out O ut E ffic Cap DC) Order # DUAL SEPARATE OUTPUT P6CUI-05053R3ZLF 5 P6CUI-05057R2ZLF 5 P6CUI-050509ZLF 5 P6CUI-050512ZLF 5 P6CUI-050515ZLF 5 P6CUI-057R218ZLF 5 P6CUI-12053R3ZLF 12 P6CUI-12057R2ZLF 12 P6CUI-120509ZLF 12 P6CUI-120512ZLF 12 P6CUI-120515ZLF 12 P6CUI-24053R3ZLF 24 P6CUI-24057R2ZLF 24 P6CUI-240509ZLF 24 P6CUI-240512ZLF 24 P6CUI-240515ZLF 24 25 25 25 25 25 24 15 15 15 15 15 8 8 8 8 8 259 266 259 259 256 251 106 111 108 92 106 55 55 54 53 53 5, 3.3 100, 152 5, 7.2 100, 69 5, 9 100, 56 5, 12 100, 42 5, 15 100, 33 7.2, 18 100, 10 5, 3.3 100, 152 5, 7.2 100, 69 5, 9 100, 56 5, 12 100, 42 5, 15 100, 33 5, 3.3 100, 152 5, 7.2 100, 69 5, 9 100, 56 5, 12 100, 42 5, 15 100, 33 77 75 77 77 78 74 78 75 77 80 78 75 75 77 78 78 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 P6CUI-050505ZLF P6CUI-057R27R2ZLF P6CUI-050909ZLF P6CUI-051212ZLF P6CUI-051515ZLF P6CUI-120505ZLF P6CUI-127R27R2ZLF P6CUI-120909ZLF P6CUI-121212ZLF P6CUI-121515ZLF P6CUI-240505ZLF P6CUI-247R27R2ZLF P6CUI-240909ZLF P6CUI-241212ZLF P6CUI-241515ZLF 25 25 25 25 25 15 15 15 15 15 8 8 8 8 8 266 259 253 250 243 111 108 108 104 102 55 54 52 50 50 5, 5 100, 100 7.2, 7.2 69, 69 9, 9 56, 56 12, 12 42, 42 15, 15 33, 33 5, 5 100, 100 7.2, 7.2 69, 69 9, 9 56, 56 12, 12 42, 42 15, 15 33, 33 5, 5 100, 100 7.2, 7.2 69, 69 9, 9 56, 56 12, 12 42, 42 15, 15 33, 33 75 77 79 80 82 75 77 77 80 81 75 77 79 82 82 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 5 5 5 5 5 12 12 12 12 12 24 24 24 24 24 If you need other specifications, please enquire. * For optional 3kV DC I/O Isolation, please add “H30” before LF! Example: P6CUI-050505ZH30LF for 3kV PM1-Series – P6CUI-xxxxZ(H30)LF – Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 2/3 Package / Pinning / Derating 2.1 (0.9) All dimensions are typical in millimeters (inches). - Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002) - Pin pitch tolerance: +/-0.35 (+/-0.014) - Case tolerance +/-0.5 (+/-0.02) Specification may change without notice. 0.50 (0.02) 0.50 (0.02) 6.00* (0.24) 19.50 (0.76) * The thickness of 48Vin voltage is 7.20(0.28) PEAK Modelcode Datecode 1 2.54 (0.10) 2 4 5 6 7 SIP 7 – PLASTIC CASE 15.24 (0.60) PIN CONNECTIONS # DUAL SEP. 1 +Vin 2 - Vin 4 +V1out 5 - V1out 6 +V2out 7 - V2out Same Pinning for 3kV Models! App Notes: ¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH. ² = Tested by minimal Vin and constant resistive load. - Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications. PM1-Series – P6CUI-xxxxZ(H30)LF – Dual Separate Output – SIP7 - Plastic Case Specification can change without a notice – We accept no liability for any inaccuracy or printing errors. Page 3/3