PDL03 SERIES DC-DC CONVERTER 2:1 WIDE INPUT RANGE UP TO 3 Watts FEATURES APPLICATIONS • NO MINIMUM LOAD REQUIRED • UP TO 3000VDC INPUT TO OUTPUT ISOLATION • SMALL SIZE AND LOW PROFILE 0.86 X 0.36 X 0.44 INCH • LOW OUTPUT RIPPLE AND NOISE • UL60950-1, EN60950-1, & IEC60950-1 SAFETY APPROVALS • CE MARKED • COMPLIANT TO RoHS II & REACH • WIRELESS NETWORK • TELECOM/DATACOM • INDUSTRY CONTROL SYSTEM • DISTRIBUTED POWER ARCHITECTURES • SEMICONDUCTOR EQUIPMENT ： 3000VDC ISOLATION 1600VDC ISOLATION REMOTE CONTROL OCP SCP TECHNICAL SPECIFICATION All specifications are typical at nominal input, full load and 25℃ otherwise noted Model Number PDL03-05S3P3 PDL03-05S05 PDL03-05S09 PDL03-05S12 PDL03-05S15 PDL03-05D05 PDL03-05D12 PDL03-05D15 PDL03-12S3P3 PDL03-12S05 PDL03-12S09 PDL03-12S12 PDL03-12S15 PDL03-12D05 PDL03-12D12 PDL03-12D15 PDL03-24S3P3 PDL03-24S05 PDL03-24S09 PDL03-24S12 PDL03-24S15 PDL03-24D05 PDL03-24D12 PDL03-24D15 PDL03-48S3P3 PDL03-48S05 PDL03-48S09 PDL03-48S12 PDL03-48S15 PDL03-48D05 PDL03-48D12 PDL03-48D15 1 Input Range Output Voltage Output Current @Full Load Input Current @ No Load Efficiency VDC 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 4.5 ~ 9 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 9 ~ 18 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 18 ~ 36 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 36 ~ 75 VDC 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 3.3 5 9 12 15 ±5 ±12 ±15 mA 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100 700 600 333 250 200 ±300 ±125 ±100 mA 45 45 55 55 55 55 60 60 25 25 30 30 30 30 30 30 16 16 17 18 18 17 18 18 10 10 11 12 12 12 12 12 % 75 79 80 81 82 78 81 81 77 81 80 83 83 82 83 83 76 82 82 83 84 80 83 85 74 79 80 81 82 79 82 83 www.PDUKE.com Maximum Capacitor Load µF 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 3300 1680 1000 820 680 ±1000 ±470 ±330 2014/04/30 PDL03 PART NUMBER STRUCTURE PDL03 - 48 Series Name S Input Voltage (VDC) 05: 4.5~9 12: 9~18 24:18~16 48:36~75 Output Quantity S:Single D: Dual 05 H Output Isolation Voltage Option (VDC) 3P3: 3.3 : Standard type 05: 5 1600VDC isolation 09: 9 H: 3000VDC isolation 12:12 15:15 05:± 5 12:±12 15:±15 INPUT SPECIFICATIONS Parameter Conditions Operating input voltage range Start up time Constant resistive load Input surge voltage 100 ms, max. 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Power up Remote ON/OFF 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) 5Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Input reflected ripple current Input filter (1) Remote ON/OFF Application circuit DC-DC ON OUTPUT SPECIFICATIONS Parameter Voltage accuracy Line regulation 2 Max. Unit 5 12 24 48 30 30 9 18 36 75 VDC ms 2 VDC 400 150 mAp-p 380 170 Capacitor type Open or high impedance 3 4 mA 2.5 mA DC-DC OFF Conditions Low Line to High Line at Full Load No Load to Full Load Load regulation Cross regulation Ripple and noise Temperature coefficient Transient response recovery time Short circuit protection Typ. 4.5 9 18 36 15 36 50 100 DC-DC ON DC-DC OFF Remote off input current Ctrl pin applied current via 1kΩ Min. 5% Load to 100% Full Load Asymmetrical load 25%/100% FL 20MHz bandwidth 25% load step change www.PDUKE.com Min. Single Dual Single Dual -1.0 -0.2 -1.0 -1.0 -0.5 -5.0 Typ. Max. Unit +1.0 +0.2 +1.0 +1.0 +0.5 +5.0 % % % % % 50 mVp-p -0.02 +0.02 %/ 500 µs Continuous, automatics recovery ℃ 2014/04/30 PDL03 GENERAL SPECIFICATIONS Parameter Conditions Isolation voltage 1 minute Isolation resistance Isolation capacitance 500VDC Switching frequency Safety approvals Full load to minimum load Case material Base material Potting material Weight MTBF Input to Output Min. Standard Type Suffix ”H” MIL-HDBK-217F Conditions Min. Without derating With derating Storage temperature range Thermal shock Vibration Relative humidity EMC SPECIFICATIONS Parameter Conditions EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Unit GΩ 200 40 100 Operating ambient temperature Max. VDC Standard Type Suffix ”H” ENVIRONMENTAL SPECIFICATIONS Parameter EMI(2) ESD Radiated immunity Fast transient (3) Surge (3) Conducted immunity Typ. 1600 3000 1 Air ± 8kV and Contact ± 6kV 10 V/m ± 2kV ±1kV 10 Vr.m.s -40 +71 -55 pF kHz UL60950-1 EN60950-1 IEC60950-1 Non-conductive black plastic None Silicone (UL94 V-0) 4.8g (0.17oz) 4.871 x 106 hrs Typ. Max. Unit ℃ ℃ +71 +100 +125 MIL-STD-810F MIL-STD-810F 5% to 95% RH Level ， Class A Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Note: 1. It will not damage the device without installing external input capacitors. It’s helpful to reduce input reflected ripple current if external input capacitors are installed. 2. The standard modules meet EMI Class A or Class B with external components. For further information, please contact with P-DUKE. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. CHARACTERISTIC CURVE PDL03-48S05 Derating Curve 3 PDL03-48S05 Efficiency vs. Input Voltage www.PDUKE.com PDL03-48S05 Efficiency vs. Output Load 2014/04/30 PDL03 MECHANICAL DRAWING PIN CONNECTION PIN SINGLE DUAL 1 -Vin -Vin 2 +Vin +Vin 3 Ctrl Ctrl 5 NC*/No pin** NC*/No pin** 6 +Vout +Vout 7 -Vout Common 8 NC -Vout *NC pin for standard type model. **No pin for 3kVDC isolation model (suffix “H”). 1. All dimensions in inch (mm) 2. Tolerance :x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin pitch tolerance ±0.01 (0.25) 4. Pin dimension tolerance ±0.004(0.1) 4 www.PDUKE.com 2014/04/30