Ordering number : EN6405F CPH3116/CPH3216 Bipolar Transistor http://onsemi.com (–)50V, (–)1A, Low VCE(sat), (PNP)NPN Single CPH3 Applications • Relay drivers, lamp drivers, motor drivers, flash Features • • • • • • Adoption of MBIT processes Large current capacity Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Specifications ( ): CPH3116 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings VCBO VCES Unit (--50)80 V (--50)80 V VCEO VEBO (--)50 V (--)5 V (--)1.0 A Collector Current (Pulse) IC ICP Base Current IB (--)200 Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Collector-to-Emitter Voltage Emitter-to-Base Voltage Emitter-to-Base Voltage Collector Current (--)3 When mounted on ceramic substrate (600mm2×0.8mm) A mA 0.9 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7015A-003 • Package : CPH3 • JEITA, JEDEC : SC-59, TO-236, SOT-23 • Minimum Packing Quantity : 3,000 pcs./reel 0.6 2.9 CPH3116-TL-E CPH3216-TL-E 0.15 Packing Type: TL Marking LOT No. CR LOT No. AR 0.05 1.6 2.8 0.2 3 0.9 0.2 0.6 TL 1 0.95 2 0.4 1 : Base 2 : Emitter 3 : Collector CPH3 CPH3116 CPH3216 Electrical Connection 3 1 CPH3116 3 1 2 CPH3216 2 Semiconductor Components Industries, LLC, 2013 September, 2013 O1012 TKIM/81006EA MSIM/62504 TSIM TB-00000308/83100 TS(KOTO) /21000 TS(KOTO) TA-2706 No.6405-1/7 CPH3116/CPH3216 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Ratings Conditions min typ Unit max ICBO IEBO VCB=(--)40V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)100mA VCE=(--)10V, IC=(--)300mA Output Capacitance Cob Collector-to-Emitter Saturation Voltage VCE(sat)1 VCE(sat)2 VCB=(--)10V, f=1MHz IC=(--)500mA, IB=(--)10mA (--280)130 (--430)190 mV IC=(--)300mA, IB=(--)6mA (--145)90 (--220)135 mV IC=(--)500mA, IB=(--)10mA (--)0.81 (--)1.2 Emitter Cutoff Current DC Current Gain Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage VBE(sat) V(BR)CBO Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time ton tstg Fall Time tf μA (--)0.1 μA 560 420 MHz (9)6 IC=(--)10μA, IE=0A IC=(--)100μA,RBE=0Ω V(BR)CES V(BR)CEO V(BR)EBO Collector-to-Emitter Breakdown Voltage 200 (--)0.1 IC=(--)1mA, RBE=∞ IE=(--)10μA, IC=0A pF V (--50)80 V (--50)80 V (--)50 V (--)5 V 35 See specified Test Circuit. ns (170)330 ns (30)40 ns Switching Time Test Circuit IB1 PW=20μs DC≤1% IB2 OUTPUT INPUT RB VR RL + 50Ω + 100μF 470μF VBE= --5V VCC=25V IC=20IB1= --20IB2=500mA (For PNP, the polarity is reversed.) Ordering Information Package Shipping memo CPH3116-TL-E CPH3 3,000pcs./reel Pb Free CPH3216-TL-E CPH3 3,000pcs./reel Pb Free IC -- VCE mA A m --20 --30 40mA --5 0 --800 A --10m --8mA --6mA --600 --4mA --400 --2mA --200 IB=0mA 0 0 --0.2 --0.4 IC -- VCE 1000 --0.6 --0.8 Collector-to-Emitter Voltage, VCE -- V --1.0 IT01643 Collector Current, IC -- A Collector Current, IC -- A 0 --4 mA 800 50mA CPH3116 mA --1000 10mA 8mA 30mA 20mA Device 6mA 4mA 600 2mA 400 200 IB=0mA CPH3216 0 0 0.2 0.4 0.6 0.8 Collector-to-Emitter Voltage, VCE -- V 1.0 IT01644 No.6405-2/7 CPH3116/CPH3216 IC -- VBE --1.0 0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --0.1 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 0 --1.2 CPH3116 VCE= --2V DC Current Gain, hFE --25°C 25°C 100 7 5 2 3 5 7 --1.0 Collector Current, IC -- A 2 5 10 0.01 3 3 5 7 1000 7 5 3 2 100 7 5 3 5 7 1.0 2 3 IT01648 f T -- IC CPH3216 VCE=10V 3 Gain-Bandwidth Product, f T -- MHz CPH3116 VCE= --10V 2 2 0.1 Collector Current, IC -- A 5 3 3 2 --0.01 2 IT01647 f T -- IC 5 25°C 7 2 7 --0.1 --25°C 100 3 5 1.2 IT01646 CPH3216 VCE=2V Ta=75°C 2 2 3 1.0 3 3 2 0.8 hFE -- IC 5 3 10 --0.01 0.6 7 Ta=75°C 2 0.4 Base-to-Emitter Voltage, VBE -- V 1000 7 5 0.2 IT01645 hFE -- IC 1000 DC Current Gain, hFE 0.7 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --0.8 --0.2 Gain-Bandwidth Product, f T -- MHz CPH3216 VCE=2V 0.9 Ta=7 5°C 25°C --25°C Collector Current, IC -- A --0.9 2 1000 7 5 3 2 100 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A 2 2 0.01 3 2 3 5 3 2 10 7 5 3 3 5 7 2 1.0 3 IT01650 CPH3216 f=1MHz 7 Output Capacitance, Cob -- pF 5 2 0.1 Cob -- VCB 100 CPH3116 f=1MHz 7 7 Collector Current, IC -- A IT01649 Cob -- VCB 100 Output Capacitance, Cob -- pF IC -- VBE 1.0 CPH3116 VCE= --2V 5 3 2 10 7 5 3 2 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 --100 IT01651 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V 5 7 100 IT01652 No.6405-3/7 CPH3116/CPH3216 VCE(sat) -- IC CPH3116 IC / IB=20 5 3 2 --0.1 °C =75 Ta 5 3 C 25° C --25° 2 --0.01 --0.01 2 3 5 7 2 --0.1 3 5 Collector Current, IC -- A 2 5°C --0.1 7 Ta= 7 C 25° 5 --25° 3 C 2 3 5 7 3 2 --0.1 5 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V 5 3 2 Ta= --25°C 7 75°C 25°C 3 2 2 3 5 7 2 --0.1 3 5 Collector Current, IC -- A 10 7 5 3 2 ICP=3A IC=1A 1m s 10 DC m 10 s op 0m s er ati on Ta=25°C Single pulse Mounted on a ceramic board (600mm2×0.8mm) For PNP, minus sign is omitted. 2 3 3 5 7 2 0.1 3 5 7 1.0 IT01654 VCE(sat) -- IC CPH3216 IC / IB=50 5 3 2 0.1 5°C 7 7 Ta= 5 C 25° C --25° 3 2 2 3 5 7 2 0.1 3 5 7 1.0 IT01656 VBE(sat) -- IC CPH3216 IC / IB=50 5 3 2 1.0 Ta= --25°C 7 5 75°C 25°C 3 2 2 3 5 7 2 0.1 3 5 7 1.0 IT01658 PC -- Ta 1.4 CPH3116 / CPH3216 1.2 0.1 7 5 0.01 0.1 2 °C 25 C Collector Current, IC -- A CPH3116 / CPH3216 2 2 --25° 0.1 0.01 ASO 3 3 2 7 --1.0 IT01657 s 0μ μs 0 50 1.0 7 5 5°C 7 Ta= 3 Collector Current, IC -- A 7 10 Collector Current, IC -- A --1.0 IT01655 CPH3116 IC / IB=50 --0.1 --0.01 5 10 7 5 7 0.01 0.01 7 VBE(sat) -- IC --10 --1.0 0.1 7 3 2 2 1.0 CPH3116 IC / IB=50 --0.01 --0.01 3 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 5 --1.0 IT01653 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 0.01 0.01 7 VCE(sat) -- IC --1.0 CPH3216 IC / IB=20 7 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 7 VCE(sat) -- IC 1.0 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V --1.0 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Emitter Voltage, VCE -- V 1.0 Mo 0.9 un 0.8 ted on ac era mi 0.6 cb 0.4 oa rd (60 0m m2 ×0 .8 mm 0.2 ) 0 5 7 100 IT01659 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT01660 No.6405-4/7 CPH3116/CPH3216 Embossed Taping Specification CPH3116-TL-E, CPH3216-TL-E No.6405-5/7 CPH3116/CPH3216 Outline Drawing CPH3116-TL-E, CPH3216-TL-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6405-6/7 CPH3116/CPH3216 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6405-7/7