Ordering number : ENA1287A MCH6122 Bipolar Transistor –30V, –3A, Low VCE(sat), PNP Single MCPH6 http://onsemi.com Applications • Relay drivers, lamp drivers, motor drivers, charger circuit Features • • • • • • Large current capacity Adoption of MBIT process • High speed switching Low collector-to-emitter saturation voltage Ultrasmall-sized package permitting applied sets to be made small and slim (0.85mm) High allowable power dissipation Halogem free compliance Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Conditions Ratings -30 V -30 V VEBO IC -5 V -3 A ICP IB Base Current Collector Dissipation Unit VCBO VCEO Junction Temperature PC Tj Storage Temperature Tstg -5 -600 When mounted on ceramic substrate (600mm2×0.8mm) A mA 1 W 150 °C -55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7022A-007 • Package : MCPH6 • JEITA, JEDEC : SC-88, SC-70-6, SOT-363 • Minimum Packing Quantity : 3,000 pcs./reel 6 5 4 0 to 0.02 1 2 3 0.65 6 2 5 AY TL 0.3 0.85 1 Marking LOT No. 0.25 Packing Type : TL LOT No. 0.07 MCH6122-TL-E MCH6122-TL-H 0.15 2.1 1.6 0.25 2.0 3 4 1 : Collector 2 : Collector 3 : Base 4 : Emitter 5 : Collector 6 : Collector MCPH6 Semiconductor Components Industries, LLC, 2013 September, 2013 Electrical Connection 1, 2, 5, 6 3 4 N2112 TKIM TC-00002852/O0808EA TIIM TC-00001607 No.A1287-1/6 MCH6122 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO IECO Emitter Cutoff Current Collector Cutoff Current DC Current Gain Gain-Bandwidth Product hFE fT Output Capacitance Cob Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Turn-On Time Storage Time VEC= -4.5V, IB=0A VCE= -2V, IC= -500mA typ VCE(sat)1 VCB= -10V, f=1MHz IC= -1.5A, IB= -30mA VCE(sat)2 VBE(sat) V(BR)CBO Unit max 200 VCE= -10V, IC= -500mA -0.1 μA -0.1 μA -1 μA 560 400 MHz 25 pF -180 -270 mV IC= -1.5A, IB= -75mA -120 -180 mV IC= -1.5A, IB= -30mA -0.83 -1.2 V IC= -10μA, IE=0A IC= -1mA, RBE=∞ -30 V -30 V IE= -10μA, IC=0A -5 V 50 tstg tf Fall Time min VCB= -30V, IE=0A VEB= -4V, IC=0A V(BR)CEO V(BR)EBO ton Emitter-to-Base Breakdown Voltage Ratings Conditions See specified Test Circuit. ns 270 ns 27 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% INPUT OUTPUT IB2 RB VR 50Ω 24Ω + + 100μF 470μF VBE=5V VCC= --12V IC=20IB1=--20IB2=--500mA Ordering Information Package Shipping memo MCH6122-TL-E MCPH6 3,000pcs./reel Pb Free MCH6122-TL-H MCPH6 3,000pcs./reel Pb Free and Halogen Free IC -- VCE VCE= --2V --2.5 Collector Current, IC -- A --8mA --6mA --1.2 --4mA --1.0 --0.8 --2mA --0.6 --0.4 --2.0 --1.5 C 25°C --25°C A 0m --4 0 --1.4 IC -- VBE --3.0 --10mA A --1.6 mA 0 --2 --50m Collector Current, IC -- A --1.8 --3 mA --2.0 Ta=75 ° Device --1.0 --0.5 --0.2 0 IB=0mA 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT04554 0 0 --0.2 --0.4 --0.6 --0.8 Bass-to-Emitter Voltage, VBE -- V --1.0 IT04555 No.A1287-2/6 MCH6122 hFE -- IC 5 Ta=75°C 3 25°C --25°C 2 Gain-Bandwidth Product, FT -- MHz DC Current Gain, hFE 7 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 Cob -- VCB 100 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV Output Capacitance, Cob -- pF 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) -- mV 2 7 2 --10 Collector-to-Base Voltage, VCB -- V VCE(sat) -- IC 7 5 3 2 C 25° C 75° Ta= 5°C --2 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 op io at er --1.0 7 5 μs s s 1m 500 s s m 0m n 25 a= (T ) °C 3 2 --0.1 7 5 3 2 Ta=25°C Single pulse When mounted on ceramic substrate (600mm2×0.8mm) --0.01 --0.01 2 3 5 7--0.1 2 3 5 7--1.0 2 3 5 7 --10 Collector-to-Emitter Voltage, VCE -- V 2 3 7 --1.0 2 3 5 IT04557 2 C 5° =7 a T C 5° --2 --100 7 5 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 IT04559 VBE(sat) -- IC IC / IB=50 --1.0 °C Ta= --25 ° 5 2 C 75°C 7 2 3 5 7 --0.1 2 3 5 7 --1.0 Collector Current, IC -- A PC -- Ta 2 3 5 7 IT04561 When mounted on ceramic substrate (600mm2×0.8mm) 100μ 10 10 5 3 <10μs C Collector Current, IC -- A ICP= --5A IC= --3A 3 5 1.2 D 3 2 ASO 2 IC / IB=20 5 --0.01 5 7 --10 IT04560 Collector Current, IC -- A --10 7 5 7 --0.1 Collector Current, IC -- A Collector Dissipation, PC -- W --10 --0.01 5 2 --1000 7 5 3 IT04558 IC / IB=50 --100 2 VCB(sat) -- IC --10 --0.01 3 Base-to-Emitter Saturation Voltage, VBE(sat) -- V 3 5 100 7 5 3 2 --1000 7 2 3 Collector Current, IC -- A f=1MHz 10 --1.0 VCE= --10V 7 --0.01 5 7 --10 IT04556 Collector Current, IC -- A fT -- IC 5 VCE= --2V 25 °C 1000 5 IT13916 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT13915 No.A1287-3/6 MCH6122 Embossed Taping Specification MCH6122-TL-E, MCH6122-TL-H No.A1287-4/6 MCH6122 Outline Drawing MCH6122-TL-E, MCH6122-TL-H Land Pattern Example Mass (g) Unit 0.008 mm * For reference Unit: mm 2.1 0.6 0.4 0.65 0.65 No.A1287-5/6 MCH6122 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A1287-6/6