METAL OXIDE VARISTOR MOV - 10mm Disc RoHS ü HOW TO SELECT METAL OXIDE VARISTORS • What is the range of ACrms or DC Voltage in the application? • How will the varistor be connected in the circuit? • Calculate the required varistor voltage at 10% to 25% above the system RMS or DC Voltage. • Calculate the varistor energy rating needed based on energy in transient voltage. • Calculate the surge current wave form from the surge voltage and surge impedance. Y Type P Type (most popular) • Check to make sure the withstanding surge current of the varistor is sufficient. • Check whether the maximum energy and surge life of the varistor is enough. • Check the relation: Maximum withstanding voltage of the protected device > Maximum clamping voltage of the varistor > The real clamping voltage occurred > Breakdown voltage of the varistor >Operating voltage of the protected device. 10 f JVR VARSITOR Maximum Allowable Voltage Varistor Voltage [email protected] Part Number Acrms Maximum Withstanding Rated Clamping Surge current Wattage Voltage DC Tolerance V@ 5A Range (V) (V) (V) (V) JVR10N180M87orr +20% " 36 11 14 18 JVR10N220L87orr +15% " 43 14 18 22 JVR10N270K87orr " 53 17 22 27 JVR10N330K87orr " 65 20 26 33 JVR10N390K87orr " 77 25 31 39 JVR10N470K87orr " 93 30 38 47 JVR10N560K87orr " 110 35 45 56 JVR10N680K87orr " 135 40 56 68 JVR10N820K87orr 50 65 82 135 JVR10N101K87orr 60 85 100 165 JVR10N121K87orr 75 100 120 200 JVR10N151K87orr 95 125 150 250 JVR10N181K87orr 115 150 180 300 JVR10N201K87orr 130 170 200 340 JVR10N221K87orr 140 180 220 360 JVR10N241K87orr 150 200 240 395 JVR10N271K87orr 175 225 270 455 JVR10N301K87orr 195 250 300 505 +10% JVR10N331K87orr 210 275 330 550 JVR10N361K87orr 230 300 360 595 JVR10N391K87orr 250 320 390 650 JVR10N431K87orr 275 350 430 710 JVR10N471K87orr 300 385 470 775 JVR10N511K87orr 320 418 510 842 JVR10N561K87orr 350 460 560 920 JVR10N621K87orr 385 505 620 1025 JVR10N681K87orr 420 560 680 1120 JVR10N751K87orr 460 615 750 1240 JVR10N781K87orr 485 640 780 1290 JVR10N821K87orr 510 670 820 1355 JVR10N911K87orr 550 745 910 1500 JVR10N102K87orr 625 825 1000 1650 JVR10N112K87orr 680 895 1100 1815 JVR10N182K87orr 1,000 1,465 1800 2970 1) The clamping voltage from 180M to 680K are tested with current 5A. For application required ratings not shown, contact RFE application engineering. DIMENSION OF COMPONENT Dimension Table unit: mm Diameter 10 f D max 12.5 d (+0.5) 0.6 / 0.8 F (+1) 5.0 / 7.5 H Max 18 / *19 H1 Max 5.0 L Min (Y Type) 24.0 L Min (P Type) 25.0 * Just for 182K 1x (A) 500 2500 2x's (A) 250 1250 (W) 0.05 0.4 Energy 10/1000 S (J) 2.4 2.7 3.5 4.4 4.7 6.0 7.0 8.5 11.0 14.0 16.0 22.0 26.0 28.5 31.0 33.5 39.5 42.0 46.0 52.0 60.0 66.0 70.0 74.0 78.0 82.0 86.0 90.0 92.0 94.0 102.0 112.0 124.0 174.0 £ : Lead Style Y: vertical kink (standard) P: straight leads UL ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü CSA VDE ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü rr : Lead Length / Packing Method Table of T Max, & a Diameter Diameter Diameter Dimension Dimension Dimension ( F) ( F) ( F) Code T Max a + 0.8 Code T Max a + 0.8 Code T Max a + 0.8 180M 4.9 0.8 181K 4.5 1.0 561K 7.3 3.4 220M/L 4.9 0.9 201K 4.6 1.0 621K 7.6 4.0 8.0 270M/K 5.1 0.9 221K 4.7 1.1 681K 4.4 330M/K 5.1 1.0 241K 4.8 1.3 751K 8.4 4.4 390L/K 5.1 1.2 271K 5.0 1.4 781K 8.6 4.6 470L/K 5.5 1.2 301K 5.2 1.6 821K 8.8 4.6 560L/K 5.5 1.4 331K 5.3 1.6 911K 9.4 5.4 680L/K 6.0 1.7 361K 5.5 1.9 102K 9.9 5.4 820K 4.3 0.8 391K 5.7 2.2 112K 10.5 5.7 101K 4.4 0.8 431K 6.5 2.5 182K 12.6 9.8 121K 4.5 0.9 471K 6.8 2.6 7.0 151K 4.9 1.2 511K 3.1 Y Form D Max P Form D Max T Max H P1 H1 L Fd Fd L a F RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] F C5BA03 REV 2011.9.9 METAL OXIDE VARISTOR MOV - 10mm Disc RoHS ü PULSE RATING CURVES JVR-10N561K~JVR-10N182K JVR-10N820K~JVR-10N511K JVR-10N180M~JVR-10N680K 500 400 3,000 2,000 3,000 2,000 200 100 80 60 1,000 800 600 1,000 800 600 400 400 200 200 100 80 60 100 80 60 40 20 10 8 6 4 40 40 20 20 10 8 6 4 10 8 6 4 2 2 1 1 2 1 0.8 0.6 0.4 2 10mm V-I CHARACTERISTIC CURVE 3000 2000 1000 900 800 700 600 500 Max Leakage Current Max Clamping Voltage JVR-10N821K JVR-10N781K JVR-10N751K JVR-10N561K JVR-10N391K JVR-10N911K JVR-10N821K JVR-10N781K JVR-10N751K JVR-10N681K JVR-10N621K JVR-10N561K JVR-10N471K JVR-10N431K JVR-10N391K 112K JVR-10N 102K JVR-10N 9 0N 11K JVR-1 0N681K JVR-1 K 0N621 JVR-1 K 0N471 JVR-1 431K N 0 -1 JVR K 0N361 JVR-1 K 112 0N 2 K R -1 1 0 JV 10N R JV 400 0N271K JVR-1 K 0N241 JVR-1 N221K 0 JVR-10N201K JVR-1 300 200 Voltage (V) 100 90 80 70 60 50 40 30 20 10 9 8 7 6 5 10 R- N3 61 K 0N JVR-1 K 71 N2 10 K R41 JV N 2 21K 0 1 R- N 2 JV -10 201K R N JV -10 R JV K 51 N1 10 RJV 1K 12 N 0 K R-1 01 JV N1 10 RK 20 JV 8 0N R-1 JV K 80 N6 10 K R0 V 6 J N5 10 0K R- 47 J V 0N 1 K R - 3 90 JV N 10 30K R 3 JV 0 N K 1 0 R- 2 7 JV 0N L 1 0 R 22 V J 0N M - 1 80 R 1 JV 10N R JV JV .000001 .00001 151K N121K 101K R-10N JVR-10 JV 0N820K JVR-1 68 0 K - 1 0N JVR 5 60 K -10N JVR 470K -10N JVR 390K -10N JVR 30 K 0N3 -1 R JV 70 K 0N 2 1 J VR JVR J 10 N 220 1 10 N VR - L 8 0M Test current waveform 10-6 to 10-3 A: Direct Current -1 3 10 to 10 A:8/20ms .0001 .001 .01 .1 1 10 100 1000 10000 Current (A) CURENT - VOLTAGE CHARACTERISTICS •Operating & Storage Temperature Range: -40 to +125°C •Temp. Coefficient of voltage: 0 ~ 0.05% / °C max RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA03 REV 2011.9.9 METAL OXIDE VARISTOR MOV - 10mm Disc RoHS ü TAPING SPECIFICATIONS Dh P2 d W2 W0 P Type Y Type l P1 W1 W2 W W0 D0 d W1 t2 t1 W l D0 P0 F P0 P H0 (Y type) H (Y type) P H0 (P type) H0 (P type) P2 T H0 (Y type) H (Y type) Dh T P1 F units: mm Dimensions Symbol Item Dimensions Cut out length 1.1 max P Pitch of component 12.7 + 0.3 H (Y Type) Height of Component from hole center 20.0 max P0 Sprocket hole pitch 12.7 + 0.3 H0 (Y Type) Height to seating plane 16.0 + 0.5 P1 Lead length from hold center lead 3.85 + 0.7 H0 (P Type) Height of component from hole center 16.0 ~ 21.0 P2 Length from hole center to disk center 6.35 + 1.3 rh Front to back deveation 0 + 2.0 D0 Procket hole diameter 4.0 + 0.2 W Carrier tape width 18.0 + 1-.05 d Lead wire diameter 0.6 + 0.05 W0 Hold down tape width 10 T Disk Thickness See T max table W1 Sprocket hole position 9.0 + 0.75 - 0.5 t1 Total thickness tape 0.7 + 0.05 W2 Adhesive tape position 3.0 max t2 Total thickness tape with tape 1.6 max F Component lead spacing 5.0 + 0.8 - 0.2 Symbol l Item REEL & AMMO SPECIFICATIONS Voltage Code 180 ~ 331 361 391 431 ~ 471 511 ~ 751 781 ~ 112 Bulk (Box 2500 2500 2500 2000 1500 1500 Ammo F=7.5 F=5.0 1000 500 1000 1000 500 1000 1000 500 1000 750 500 750 500 500 500 500 500 500 Reel PART NUMBER EXAMPLE JVR - 10 N 180 K 6 5 Y RW (1) (2) (3) (4) (5)(6)(7)(8) (9) STANDARD LEAD CONFIGURATIONS See “Dimensions & Tolerances” pages for bulk and taping specifications Seating Plane Lead End (Bulk) Center of Sprocket Hole (Taped) 1- Series (JVR) Metal Oxide Varistor 2- Disc Diameter or size 3- N for standard 4- Varistor Voltage 5- Tolerance: K= + 10% L = + 15% M =+ 20% 6- Lead Diameter 6: 0.6±0.05mm 8: 0.8±0.05mm 7- Lead Spacing 5: 5.0mm 7: 7.5mm 8 - Y or P Type Lead Configurations L (Bulk) HO (Taped) P Type Y Type (most popular) 9 - Lead Length / Packaging Lead Type Code 50 U4 AW Y Type RW Leads AX RX AZ 50 P Type U5 Leads AY RY Dimension* L= 5±0.5mm L= 24mm min. HO= 16mm HO= 16mm HO= 18mm HO= 18mm HO= 20mm L= 5±0.5mm L= 25mm min. HO= 20mm HO= 20mm Packaging Bulk Bulk Ammo Reel Ammo Reel Ammo Bulk Bulk Ammo Reel * See “Dimensions & Tolerances” pages, for dimension illustration. L - From seating plane to end of lead. HO - From seating plane to center of sprocket feed hole. RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail [email protected] C5BA03 REV 2011.9.9