Main Circuits 825-MCM Converter Modules Rated Operating Voltage Ue IEC CSA/UL Rated Impulse Strength Uimp Operating Current Range (A) 825-MCM2 825-MCM5 400V AC 240V AC 2.5kV 825-MCM180 825-MCM420 825-MCM630N 1,000V AC 600C AC 8kV 825-MCM20 690V AC 600V AC 6kV 825-MCM2 825-MCM5 825-MCM20 825-MCM180 825-MCM420 825-MCM630N 0.5-2.5 3 1-5 6 2.5-20 24 20-180 216 160-420 504 160-630 756 30 60 240 1350 3400 4600 Rated Continuous Thermal Current (A) Rated Saturation Current Rated Frequency 50/60 Hz ± 3 Hz Voltage Input Option Card Inputs Rated Operating Voltage (Ue) 67 ... 300V AC (line-to-neutral) Operating Range 0.80 ... 1.1 Ue Rated Continuous Voltage 300V AC Rated Insulation Voltage (Ui) 300V AC Rated Impulse Strength (Uimp) 4kV Rated Frequency 50/60 Hz (±5 Hz) Control Circuits Supply Supply Rated Supply Voltage (Us) 110 ... 240V AC 110 ... 250V DC Operating Range 0.80 ... 1.1 Us Rated Frequency (V AC) 50/60 Hz (±5 Hz) Max. Power Consumption AC: 15VA, DC: 15 W Output Relays Type of Contacts Trip Aux1 ... Aux 6 Form C DPDT Form A SPDT - NO Rated Operating Voltage (Ue) IN1 and IN2 24V AC/DC IN3, IN4 and IN5 120V AC/DC Operating Range 0.80 ... 1.1 Ue Rated Insulation Voltage (Ui) 300V AC Rated Impulse Strength (Uimp) 4kV Rated Frequency (AC) 50/60 Hz (±5 Hz) On-State Voltage 15V 79V On-State Current (turn-on) 2mA 2mA Steady State Current (max) 15mA 15mA Off-State Voltage 5V 20V Off-State Current 0.5 mA 1 mA Transition Voltage 5...15V 20...79V PTC Thermistor Input Type of Control Unit Mark A Max. No. of Sensors in Series 6 Max. Cold Resistance of PTC Sensor Chain 1500Ω Trip Resistance 3400Ω ± 150Ω Reset Resistance 1500 ... 1650Ω Short Circuit Trip Resistance 25Ω ± 10Ω Rated Insulation Voltage (Ui) 300V AC Rated Operating Voltage (Ue) 240V AC Rated Impulse Strength (Uimp) 4kV Mechanical Ratings Rated Thermal Current (Ithe) 5A Environmental Rated Operating Current (Ie) 120V AC 240V AC 3A 1.5A Ambient Temperature Storage Operating (open) Humidity (Operating) -40...+85˚C (-40...+185˚F) -20...+60˚C (-4...+140˚F) 5...95% Non-condensing Contact Rating Designation B300 Maximum Altitude 2000 m Utilization Category AC15 Vibration (per IEC 68-2-6) 3G Contact Reliability 5 mA @ 17V Shock (per IEC 68-2-27) 30G Pollution Degree 3 Protection Class 825-P 825-MCM IP65 IP40 Electromagnetic Compatibility Control Terminals Terminal Screw M3 Cross Section (Stranded/Solid) 1 x 0.14...2.5 mm2 1 x 26...12 AWG Torque 0.79 Nm/7 lb-in Degree of Protection IP20 Electrostatic Discharge Immunity Test Level Performance Criteria 11 2 RF Immunity Test Level RTD Scanner Module 8kV Air Discharge Performance Criteria 10V/m 11 2 Supply Rated Supply Voltage (Us) 110/240V AC Operating Range 0.80 ... 1.2 Us Rated Frequency 50/60 Hz (±5 Hz) Max. Power Consumption 5 VA Rated Insulation Voltage (Ui) 300V AC Rated Impulse Strength (Uimp) 4kV Surge Immunity Ambient Temperature Storage -40...+85˚C (-40...+185˚F) Performance Criteria Operating (open) -20...+60˚C (-4...+140˚F) Emissions Humidity (Operating) 5...95%, Non-condensing Radiated Emissions Class A Maximum Altitude 2000 m Conducted Emissions Class A Vibration (per IEC 68-2-6) 3G Shock (per IEC 68-2-27) 30G Pollution Degree 3 Protection Class IP 40 Electrical Fast Transient/Burst Immunity Test Level Performance Criteria Test Level Environmental Type 3-wire CSA C22.2 No. 14 Compatibility CU10 NI100 NI120 PT100 (per IEC 60751: 1983) EN 60947-4-1 > 250C Short Circuit Detection < -50C Degree of Protection IP20 11 2 Environment 2. Standards Open Circuit Detection 2kV L-E 1kV L-L 2 12 Accuracy 2 Performance criteria 1 requires the DUT to experience no degradation or loss of performance. Number of input channels -50...250 C ± 2C 11 1 Inputs Range 4kV (Power) 2kV (Control and Comms) EN 60947-5-1 UL 508 UL1053