H G F E D C A 44 `0,05 88 F B 44 `0,05 F n2,6 37,6 `0,05 33,4 `0,05 29,2 `0,05 37,7 `0,05 25 `0,05 32,65 `0,05 20,8 `0,05 27,6 `0,05 Pos. 46 and 47 5mm recessed 16,6 `0,05 12,4 `0,05 E E n1,15 2,125 `0,05 2,125 `0,05 ) (2 4x 0, 1 1` n 1 ( 20 x) ,6 ` 0,1 D 6,8 `0,05 n1 2,7 `0,05 2,7 `0,05 ,3 4,1 `0,05 n3 n3 94 max. (3x ) (2 x ,5 + - 0 0,1 12,7 max. ) Crimp contacts (3x) must be ordered separately D + - 0 0 ,1 see note 5 4 `0,05 0,2 `0,05 4,5 n0,65 2,125 `0,05 6 2,125 `0,05 18,8 8,2 `0,05 9,5 `0,05 12,2 `0,05 14,9 `0,05 17,6 `0,05 4 see note 3 3 2 20,3 `0,05 1 C C 23 `0,05 NOTES: PCB hole pattern 1. MATERIALS AND FINISHES: - INSULATOR: GLASS FILLED PLASTIC UL 94 V-0 RATED, GREY RAL 7035 - CONTACTS: COPPER ALLOY, PLATING: 0,8 µM GOLD OVER NICKEL 2. ELECTRICAL CHARACTERISTICS: CREEPING AND CLEARANCE DISTANCE; MINIMUM: - CONTACT 47 TO CONTACT 46: 2,5 MM - CONTACT 47 TO CONTACT 45: 3,2 MM - CONTACT 46 TO CONTACT 45: 3,2 MM - CONTACT 47 TO SIGNAL CONTACTS: 6,4 MM B - CONTACT 46 TO SIGNAL CONTACTS: 6,4 MM B - CONTACT 45 TO SIGNAL CONTACTS: 2,0 MM CONTACT CURRENT RATING: 3 24 20 1 quantity - POWER CONTACTS POS. 45-47: 40 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - POWER CONTACTS POS. 1-20: 28 AMPERES CONTINUOUS, ALL CONTACTS UNDER LOAD - SIGNAL CONTACTS: 3 AMPERES NOMINAL INITIAL CONTACT RESISTANCE PER IEC 512-2, TEST 2b: - POWER CONTACTS: 0,0007 OHM MAX. VOLTAGE PROOF: - CONTACTS POS. 46, 46, 47: 3 kV r.m.s. - CONTACTS POS. 1-20: 1,5 kV r.m.s. - CONTACTS POS. 21-44: 1 kV r.m.s. 3. CONTACTS (3x) ARE CRIMP, REMOVABLE AND ORDERED SEPARATELY 4. WORKING TEMPERATURE: -55°C TO +125°C 5. CONNECTOR IS PART MARKED: PART-NO. CONEC ABC G F E D C DO NOT ALTER CAD DRAWING BY HAND THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH INSULATION RESISTANCE: 5 G OHM PER IEC 512-2, TEST 3a H material dwg no. / norm partlist - SIGNAL CONTACTS: 0,004 OHM MAX. A 4 3 2 1 item Crimp contact (Pos. 45-47) see note 3 Signal contact (Pos. 21-44) Power contact (Pos. 1-20) Case 47pos. female part description finish: tolerance see notes ISO 2768-m 21.02.06 FEMALE CONNECTOR 47pos. Schmidt CRIMP LOW + SOLDER PIN STRAIGHT CompactPCI Kühle norm dwg no: d-old date part no: name B Inventor 45K2A019 R rev. description 2:1 see notes title: name date drawn 21.02.06 appd. dim. in mm scale: material: DINA2 sh: 1 CPH47W23FGRCSN9X A A