CLD-AP42 Rev 9C Binning & Labeling Cree® XLamp® ML Family LEDs Table of Contents Introduction Bin and Order Code Formats.....................................................2 This document describes the product nomenclature required Performance Groups – Luminous or Radiant Flux..................3 to select and order Cree’s XLamp® ML family of LEDs. XLamp Performance Groups – Dominant Wavelength........................4 ML family LEDs are tested and sorted into bins which are then Performance Groups – Chromaticity........................................5 combined into orderable kits identified by an order code. Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve....................................................................................8 All XLamp LEDs are tested and sorted by color and brightness Cree’s Standard Cool White Kits Plotted on ANSI Standard into a unique bin. Each bin contains LEDs from only one color Chromaticity Regions................................................................9 and brightness group and is uniquely identified by a bin code. Cree’s Standard Warm and Neutral White Kits Plotted on White XLamp LEDs are sorted by chromaticity (color) and ANSI Standard Chromaticity Regions.....................................11 luminous flux (brightness). Color XLamp LEDs are sorted by Cree’s Standard Chromaticity Kits..........................................13 dominant wavelength (color) and luminous flux (brightness). Standard Order Codes and Bins LEDs are shipped on reels containing LEDs from one bin and ML-B Cool White.................................................................14 are always labeled with the appropriate bin code. ML-B Warm White...............................................................15 ML-C Parallel Cool White...................................................16 Kits contain LEDs from a number of similar bins and are fully ML-C Parallel Warm White.................................................17 defined by their order codes. A full explanation of the order ML-C Series Cool White.....................................................19 codes for XLamp ML family LEDs, as well as a list of standard ML-C Series Warm White...................................................20 order codes, is provided in this document. ML-C Color..........................................................................21 ML-E Parallel Cool White....................................................22 ML-E Parallel Warm White.................................................23 ML-E Series Cool White......................................................25 www.cree.com/Xlamp ML-E Series Warm White...................................................26 ML-E Parallel Color.............................................................27 ML-E Series Color...............................................................29 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 1 XLamp ® ML Family LED Binning & Labeling Bin and Order Code Formats Bin codes and order codes are configured in the following manner: Order Code SSSCCC-BB-HHHH-NNNFGG Bin Code Series MLE = ML-E MLC = ML-C MLB = ML-B Series MLE = ML-E MLC = ML-C MLB = ML-B CRI Configuration A1 = Typical CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum CRI Configuration A1 = Typical CRI H1 = 80 CRI minimum P1 = 85 CRI minimum U1 = 90 CRI minimum Luminous Flux Chromaticity Internal code Color/Configuration AWT = White - Parallel SWT = White – Series ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RED = Red Luminous flux group SSSCCC-BB-WWW-FF-A-AAAAA Internal code Chromaticity code Color/Configuration AWT = White - Parallel SWT = White - Series ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RED = Red Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 2 XLamp ® ML Family LED Binning & Labeling Performance Groups – Luminous or Radiant Flux White XLamp ML family LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code F0* G0 F2 F3 G2 Minimum Luminous Flux (lm) Maximum Luminous Flux (lm) 10.7 13.9 13.9 G3 H0* J0* K2 H2 H3 J2 J3 18.1 23.5 10.7 12.3 13.9 15.8 18.1 20.6 23.5 26.8 30.6 18.1 23.5 30.6 12.3 13.9 15.8 18.1 20.6 23.5 26.8 30.6 35.2 K3 35.2 39.8 M2 39.8 45.7 M3 45.7 51.7 N2 51.7 56.8 N3 56.8 62 N4 62 67.2 P2 67.2 73.9 P3 73.9 80.6 Notes: • Flux codes F0, G0, H0 and J0 are further subdivided into F2, F3, G2, G3 and H2, H3, respectively. Orders for the F0 flux code may be filled with either F2 or F3 sub-codes, orders for the G0 flux code may be filled with either G2 or G3 sub-codes, orders for the H0 flux code may be filled with H2 or H3 sub-codes, and orders for the J0 flux code may be filled with J2 or J3 sub-codes. Royal-blue XLamp LEDs are tested for radiant flux and sorted into one of the following radiant-flux bins. Group Minimum Radiant Flux (mW) Maximum Radiant Flux (mW) 03 50 60 04 60 70 05 70 85 06 85 100 07 100 122 08 122 147 09 147 175 10 175 210 11 210 250 12 250 300 13 300 350 14 350 425 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 3 XLamp ® ML Family LED Binning & Labeling Performance Groups – Dominant Wavelength The XLamp ML-E color LEDs are tested individually for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Royal Blue Blue Green Amber Red DWL Group Minimum DWL (nm) Maximum DWL (nm) D36 450 452.5 D37 452.5 455 D46 455 457.5 D47 457.5 460 D56 460 462.5 D57 462.5 465 B3 465 470 B4 470 475 B5 475 480 B6 480 485 G2 520 525 G3 525 530 G4 530 535 A2 585 590 A3 590 595 R2 620 625 R3 625 630 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 4 XLamp ® ML Family LED Binning & Labeling Performance Groups – Chromaticity Region 0A 0R 1A 1R 2A 2R 3A 3R 4A 4R x y 0.2950 0.2970 0.2920 0.3060 0.2984 0.3133 0.3009 0.2980 0.2950 0.2970 0.3009 0.3042 0.3037 0.2937 0.3048 0.3130 0.3144 0.3186 0.3068 0.3068 0.3144 0.3186 0.3161 0.3059 0.3093 Region x y 0.2920 0.3060 x y 0.2984 0.3133 0.2895 0.3135 0.2962 0.3220 0.2962 0.3220 0.3028 0.3304 0.3042 0.2984 0.2880 0.2895 0.3133 0.3048 0.3135 0.2962 0.2870 0.3210 0.2937 0.3312 0.2937 0.3312 0.2962 0.3220 0.3005 0.3415 0.3028 0.3304 0.3207 0.3028 0.3290 0.3115 0.3304 0.3115 0.3391 0.3205 0.3130 0.3290 0.3213 0.3373 0.3113 0.3048 0.3113 0.3005 0.3207 0.3130 0.3415 0.3099 0.3099 0.3509 0.3115 0.3391 0.3196 0.3602 0.3205 0.3481 0.2993 0.3028 0.3304 0.3115 0.3215 0.3350 0.3290 0.3417 0.3207 0.3462 0.3290 0.3538 0.3290 0.3300 0.3222 0.3243 0.3290 0.3417 0.3215 0.3350 0.3222 0.3243 0.3196 0.3602 0.3290 0.3300 0.3290 0.3180 0.3290 0.3690 0.3290 0.3538 0.3231 0.3371 0.3120 0.3207 0.3490 0.3376 0.3451 0.3554 0.3463 0.3687 0.3440 0.3427 0.3366 0.3369 0.3451 0.3554 0.3371 0.3490 0.3366 0.3440 0.3369 0.3381 0.3428 0.3480 0.3429 0.3307 0.3361 0.3245 0.3463 0.3687 0.3376 0.3616 0.3530 0.3597 0.3548 0.3736 0.3615 0.3659 0.3590 0.3521 0.3641 0.3804 0.3615 0.3659 0.3512 0.3512 0.3465 0.3530 0.3465 0.3571 0.3590 0.3521 0.3668 0.3957 0.3567 0.3389 0.3495 0.3339 0.3641 0.3804 0.3548 0.3736 0B 0S 1B 1S 2B 2S 3B 3S 4B 4S Region x y 0.2984 0.3133 0.3048 0.3207 0.3068 0.3113 0.3207 0.3009 0.3042 0.3220 0.3037 0.2937 0.3009 0.3042 0.3068 0.3113 0.3093 0.2993 0.3391 0.3130 0.3290 0.3481 0.3213 0.3373 0.3221 0.3261 0.3290 0.3144 0.3186 0.3509 0.3144 0.3186 0.3221 0.3261 0.3231 0.3120 0.3391 0.3161 0.3059 0.3290 0.3538 0.3290 0.3417 0.3376 0.3616 0.3371 0.3490 0.3371 0.3490 0.3366 0.3369 0.3290 0.3417 0.3290 0.3300 0.3290 0.3690 0.3290 0.3300 0.3381 0.3762 0.3366 0.3369 0.3376 0.3616 0.3361 0.3245 0.3462 0.3290 0.3538 0.3290 0.3180 0.3616 0.3463 0.3687 0.3451 0.3554 0.3551 0.3760 0.3533 0.3620 0.3533 0.3620 0.3515 0.3487 0.3451 0.3554 0.3440 0.3427 0.3762 0.3480 0.3840 0.3440 0.3428 0.3840 0.3571 0.3907 0.3515 0.3487 0.3551 0.3760 0.3495 0.3339 0.3463 0.3687 0.3429 0.3307 0.3641 0.3804 0.3615 0.3659 0.3736 0.3874 0.3702 0.3722 0.3702 0.3722 0.3670 0.3578 0.3597 0.3615 0.3659 0.3590 0.3521 0.3907 0.3668 0.3957 0.3590 0.3521 0.3771 0.4034 0.3670 0.3578 0.3736 0.3874 0.3640 0.3440 0.3641 0.3804 0.3567 0.3389 0C 0T 1C 1T 2C 2T 3C 3T 4C 4T Region 0D 0U 1D 1U 2D 2U 3D 3U 4D 4U Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 5 XLamp ® ML Family LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 5A1 5B1 5C1 5D1 6A1 6B1 6C1 6D1 7A1 7B1 x y 0.3670 0.3578 0.3686 0.3649 0.3744 0.3685 0.3726 0.3702 0.3719 0.3797 0.3782 0.3837 0.3763 0.3760 Region x y 0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3612 0.3744 0.3722 0.3719 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837 5A2 5B2 Region x y 0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3685 0.3804 0.3797 0.3782 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877 5A3 5B3 Region x y 0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3721 0.3783 0.3646 0.3837 0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798 5A4 5B4 0.3825 0.3798 0.3847 0.3877 0.3912 0.3917 0.3887 0.3836 0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917 0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958 0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875 0.3783 0.3646 0.3804 0.3721 0.3863 0.3758 0.3840 0.3681 0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758 0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794 0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716 0.3889 0.3690 0.3915 0.3768 0.3981 0.3800 0.3953 0.3720 0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800 0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832 0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751 0.3941 0.3848 0.3968 0.3930 0.4040 0.3966 0.4010 0.3882 0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966 0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001 0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916 0.4080 0.3916 0.4113 0.4001 0.4186 0.4037 0.4150 0.3950 0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037 0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073 0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984 0.4017 0.3751 0.4048 0.3832 0.4116 0.3865 0.4082 0.3782 0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865 0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898 0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814 0.4147 0.3814 0.4183 0.3898 0.4242 0.3919 0.4203 0.3833 0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919 0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939 0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853 0.4221 0.3984 0.4259 0.4073 0.4322 0.4096 0.4281 0.4006 0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096 0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119 0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028 5C2 5D2 6A2 6B2 6C2 6D2 7A2 7B2 5C3 5D3 6A3 6B3 6C3 6D3 7A3 7B3 5C4 5D4 6A4 6B4 6C4 6D4 7A4 7B4 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 6 XLamp ® ML Family LED Binning & Labeling Performance Groups – Chromaticity (continued) Region 7C1 7D1 8A1 8B1 8C1 8D1 AB2 AB1 AA2 AA1 x y Region x y 0.4385 0.4119 0.4342 0.4028 0.4385 0.4119 0.4449 0.4141 0.4430 0.4212 0.4496 0.4236 0.4403 0.4259 0.4049 0.4449 0.3853 0.4300 0.4300 0.3939 0.4342 0.4028 0.4359 0.3960 0.4316 0.3873 0.4403 0.4049 0.4359 0.3960 0.4373 0.4418 0.3893 0.4418 0.3981 0.4465 0.4475 0.3994 0.4428 0.3906 0.4523 0.4085 0.4475 0.3994 0.4465 0.4071 0.4513 0.4164 0.4513 0.4164 0.4573 0.4178 0.4562 0.4260 0.4624 0.4274 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099 0.4582 0.4099 0.4634 0.4193 0.4695 0.4207 0.4641 0.4112 0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207 0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221 0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126 0.4483 0.3919 0.4532 0.4008 0.4589 0.4021 0.4538 0.3931 0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021 0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034 0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944 0.5008 0.4256 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5070 0.4350 0.5133 0.4348 0.5196 0.4346 0.5258 0.4343 0.5133 0.4348 0.5196 0.4346 0.5258 0.4343 0.5321 0.4341 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5253 0.4248 0.4946 0.4162 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5008 0.4256 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5069 0.4254 0.5131 0.4252 0.5192 0.4250 0.5253 0.4248 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5186 0.4154 0.4884 0.4067 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.4946 0.4162 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5006 0.4160 0.5066 0.4158 0.5126 0.4156 0.5186 0.4154 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.5118 0.4061 0.4822 0.3973 0.4879 0.3972 0.4936 0.3970 0.4993 0.3969 0.4884 0.4067 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.4942 0.4066 0.5001 0.4064 0.5059 0.4062 0.5118 0.4061 0.4879 0.3972 0.4936 0.3970 0.4993 0.3969 0.5050 0.3967 7C2 7D2 8A2 8B2 8C2 8D2 AB3 AB4 AA3 AA4 Region x y 0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4141 0.4513 0.3939 0.4359 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981 0.3981 0.4475 0.4071 0.4523 0.4582 0.4099 0.4532 0.4008 0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 7C3 7D3 8A3 8B3 8C3 8D3 AC2 AC1 AD2 AD1 Region x y 0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4164 0.4465 0.4071 0.3960 0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893 0.3994 0.4428 0.3906 0.4085 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919 0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 7C4 7D4 8A4 8B4 8C4 8D4 AC3 AC4 AD3 AD4 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 7 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve 0.42 0.41 4500 K 0.40 5000 K 0.39 0.38 5700 K 6500 K CCy 4C 0T 0.33 0S 0.32 0.31 0.30 4R 3U 3R 2A 1D ANSI C78.377A 2U 2R 1A 0D 0A 2D 1C 0C 0B 4U 3A 2B 1B 4A 3D 2C 1T 1S 4D 3B 2S 8000 K 4B 3C 2T 0.36 0.34 3T 3S 0.37 0.35 4T 4S 1U 1R 0U 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.28 0.29 0.28 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K CCy 0.42 4000 K 0.41 6C3 4500 K 6C2 6B3 0.40 6B2 5C3 5B3 5B4 0.38 5B1 5D3 6A2 5A2 7A2 6D3 6D2 6A3 5D2 5A3 0.37 6B1 5C4 5C1 5B2 6C1 6B4 5C2 0.39 6C4 6D4 7A1 7A4 7A3 7D1 7D2 7D4 8B1 7C4 7C1 7B4 7B1 7C2 7B3 7B2 7D3 8A1 8A2 8A3 8A4 8B3 8B2 7C3 8D1 8B4 8D2 8C3 8C4 8D3 8D4 ANSI C78.377A 6D1 6A4 5D4 8C1 8C2 6A1 5D1 5A4 5A1 0.36 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 8 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - Continued 0.45 0.44 3000 K 0.43 0.42 CCy 8A1 8D2 8A3 8A2 7D3 8B4 8B1 7C4 AB2 AB3 AC2 AB1 AB4 AC1 AC4 AA3 AD2 AC3 8C3 8C4 8C1 AA2 AD3 8D3 AA1 AA4 AD1 AD4 8D4 8D1 8A4 8C2 8B3 8B2 7C3 7C2 0.41 0.40 2200 K 2450 K 2700 K 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions 0.40 0.40 5000 K 0.39 0.38 5700 K 0.38 0.37 6500 K DT 0.34 2B 1S 0T 0.33 0S 0.32 1B 0C 0B 0.31 2A ANSI C78.377A 1U 0T 0S 0.31 3R 2A 2U 1D ANSI C78.377A 2R 1A 0D 0A 0.30 0R 0C 2D 1C 1B 0B 3A 2B 1S 0.32 1R 0U 0.30 1T 0.34 0.33 2U 2R 1A 0D 0A 1D 3B 2C 8000 K 2D 1C 2T 2S 0.35 CCy 8000 K 2C 1T 3S 51 6500 K 0.36 2S 0.35 5700 K 0.37 2T 0.36 1U 1R 0U 0R 0.29 0.29 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.36 0.35 0.34 0.28 0.29 CCx 0.33 0.32 0.31 0.30 0.29 0.28 0.28 0.28 CCy 5000 K 0.39 CCx Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 9 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions - Continued 0.40 0.40 5000 K 0.39 0.38 DV 6500 K 0.36 6500 K 0.36 1T 0S 0.32 0.31 2A 1B 0C 0B 1D 0C 2U ANSI C78.377A 2R 1A 0A 3R 2A 1D 1U 0D 1R 0U 0.30 0R 0R 0.29 0.29 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.36 0.28 0.28 CCx CCx 0.40 0.42 5000 K E3 0.39 0.38 0.41 E2 6500 K 2T E1 0.35 8000 K E0 0.34 1S 0T 0.33 0S 0.32 0B 0.31 1D 2U 1U 0T 0S 0B 0.31 0D 0.30 0R 4U 4R 3U 3R 2A 1D 1A 0A 2D 1C 1B 0C 4D 4A 3D 3A 2B 1S 0.32 1R 4C 4B 3B 2C 1T 8000 K 0.33 ANSI C78.377A 0U 0.30 0.35 3T 3C 2T 2S 0.34 2R 1A 0D 0A 3R 2A 6500 K 0.36 2D 1C 1B 0C 3D 3A 2B 4T 4S 3S 0.37 2C 1T DZ 5700 K 0.38 3C 3B 2S 5000 K 0.39 3S CCy 0.36 4500 K 0.40 5700 K 0.37 ANSI C78.377A 2U 2R 1U 1R 0U 0R 0.29 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.30 0.28 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.31 0.28 0.28 0.29 CCy 2D 1C 1B 0B 0.31 1R 0U 0.30 0S 0.32 ANSI C78.377A 2R 1U 0T 3A 2B 1S 0.33 2U 1A 0D 0A 8000 K CCy 0T 0.33 3B 2C 1T 0.34 2D 1C 2T 2S 0.35 2B 1S 3S 50 0.37 2C 8000 K 0.34 5700 K 2T 2S 0.35 CCy 0.38 5700 K 0.37 5000 K 0.39 CCx CCx 0.42 0.41 4500 K 0.40 5000 K 0.39 6500 K 4C 0T 0.33 0S 0.32 0B 0.31 0.30 4U 4R 3U 3R 2A 1D 1A 0D 0A 2D 1C 1B 0C 3A 2B 1S 4A 3D 2C 1T 8000 K 4D 3B 2S 0.34 4B 3C 2T 0.36 CCy 4T 4S 3T 3S 0.37 0.35 DY 5700 K 0.38 ANSI C78.377A 2U 2R 1U 1R 0U 0R 0.29 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.28 CCx Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 10 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 4000 K 0.41 E6 4500 K E5 0.40 CCy E7 3500 K 5000 K 0.39 E4 0.38 5B1 0.37 5D3 6D4 7A4 7A1 8C1 8B4 8C2 8C3 8C4 8D3 8D2 8D4 6A4 5D1 ANSI C78.377A 5A1 4D 8B3 6A1 5D4 5A4 3B 8B2 6D1 5D2 5A2 3C 0.36 6D2 6A3 6A2 8D1 8A4 8A1 7D4 7D1 8A3 8A2 7D3 7D2 7A3 7A2 6D3 8B1 7C4 7C1 7B4 7B1 6C1 6B1 5C4 5A3 4B 6C2 6C4 6B4 5C1 5B4 4C 6B2 5C3 5C2 5B3 5B2 6C3 6B3 7C2 7B3 7B2 7C3 E8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx 0.46 0.45 2700 K 3000 K 0.44 0.43 3500 K 0.42 4000 K 0.41 4500 K CCy 0.40 0.39 F4 0.38 0.37 5C4 5D2 7A2 6D3 6D2 6A3 6A2 5D3 5A3 6C1 6D4 7A1 7A4 7C1 7B4 7B1 6C4 6B4 6B1 5C1 5B1 5A2 4B 7A3 7D1 7D2 7D4 7D3 8A1 8A2 8A4 8A3 8D1 8B4 8D2 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A4 4D 3B 5B3 5B4 3C 0.36 5C3 5B2 4C 6C2 8B1 7C4 8B3 8B2 7C3 7C2 7B3 7B2 6B2 5C2 F7 6C3 6B3 F5 5000 K F6 F8 5A1 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.33 CCx Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 11 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Continued 0.46 0.45 2700 K 3000 K 0.44 0.43 0.42 Z6 4000 K 0.41 Z5 4500 K 0.40 CCy Z7 3500 K 0.39 5B3 5B1 4C 0.37 5A2 6D4 7A4 7A1 7D2 7A3 7D4 7D1 8A1 8A2 8A4 8A3 8C1 8C2 8C3 8C4 8D3 8D4 6D1 6A4 5D4 6A1 5D1 ANSI C78.377A 5A1 4D 8D2 8D1 5A4 3C 3B 6D2 6A2 5D3 7A2 6D3 6A3 5D2 5A3 4B 6B1 5C4 5C1 5B4 0.38 6C4 7D3 8B3 8B4 8B1 7C4 7C1 7B4 7B1 6C1 6B4 5C2 5B2 0.36 6C2 6B2 5C3 5000 K 6C3 6B3 7C2 7B3 7B2 8B2 7C3 Z8 4A 3D 0.35 3A 0.34 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.33 0.34 0.35 0.33 CCx 0.45 0.44 3000 K 0.43 0.42 CCy 8B1 7C4 0.41 0.40 7C3 7C2 7D3 8A1 8A3 8A2 8A4 8D1 8B3 8B2 8B4 8D2 8C1 8C2 EA 2450 K 2700 K 2200 K AB2 AB3 AC2 AB4 AC1 AC4 8C3 AB1 AC3 8C4 AA2 AA3 AD2 AD3 8D3 AA1 AA4 AD1 8D4 AD4 0.39 0.38 0.37 0.55 0.54 0.53 0.52 0.51 0.50 0.49 0.48 0.47 0.46 0.45 0.44 0.36 CCx Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 12 XLamp ® ML Family LED Binning & Labeling Cree’s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits for the ML family of LEDs. Color Cool White Warm White CCT Kit Chromaticity Bins 7000 K DT 0A, 0B, 0C,0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U 7000 K E0 0A, 0B, 0C, 0D 6500 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S 6500 K E1 1A, 1B, 1C, 1D 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6000 K DV 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U 5700 K E2 2A, 2B, 2C, 2D 5500 K DY 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U 5000 K DZ 2C, 2D, 2T, 2U, 3A, 3B, 3C, 3D, 3R, 3S, 3T, 3U, 4A, 4B, 4R, 4S 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 4000 K Z5 5A3, 5B4, 5C1, 5D2 3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 3500 K Z6 6A3, 6B4, 6C1, 6D2 3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 3000 K Z7 7A3, 7B4, 7C1, 7D2 2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 2700 K Z8 8A3, 8B4, 8C1, 8D2 2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4 The following tables of order codes list flux minimums and chromaticity regions for the various categories of XLamp ML LEDs. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. For other flux and chromaticity combinations, contact Cree or an authorized distributor. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 13 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-B Cool White, TJ = 25 °C) XLamp ML-B LED Standard Kit Codes - White Chromaticity Minimum Luminous Flux (lm) @ 80 mA* Order Codes Kit CCT Code Flux (lm) 75 CRI Typical DT 7000 K J0 23.5 MLBAWT-A1-0000-000WDT E0 7000 K J0 23.5 MLBAWT-A1-0000-000WE0 51 6500 K J0 23.5 MLBAWT-A1-0000-000W51 E1 6500 K MLBAWT-A1-0000-000WE1 50 6200 K 80 CRI Minimum ANSI Cool White (4500 K – 8300 K) J0 23.5 H0 18.1 J0 23.5 MLBAWT-A1-0000-000W50 MLBAWT-A1-0000-000WDV MLBAWT-H1-0000-000VE1 DV 6000 K J0 23.5 E2 5750 K J0 23.5 MLBAWT-A1-0000-000WE2 DY 5500 K J0 23.5 MLBAWT-A1-0000-000WDY DZ 5000 K E3 5000 K J0 23.5 MLBAWT-A1-0000-000WDZ J0 23.5 MLBAWT-A1-0000-000WE3 H0 18.1 MLBAWT-H1-0000-000WE3 MLBAWT-H1-0000-000VE3 F4 4750 K J0 23.5 MLBAWT-A1-0000-000WF4 A2 4750 K J0 23.5 MLBAWT-A1-0000-000WA2 E4 4500 K J0 23.5 MLBAWT-A1-0000-000WE4 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 14 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-B Warm White, TJ = 25 °C) XLamp ML-B LED Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 80 mA* Order Codes Code Flux (lm) 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum J0 23.5 MLBAWT-A1-0000-000WF5 H0 18.1 MLBAWT-A1-0000-000VF5 J0 23.5 MLBAWT-A1-0000-000WE5 H0 18.1 MLBAWT-A1-0000-000VE5 MLBAWT-H1-0000-000VE5 J0 23.5 MLBAWT-A1-0000-000WZ5 MLBAWT-H1-0000-000WZ5 MLBAWT-P1-0000-000VE5 MLBAWT-U1-0000-000VE5 H0 18.1 MLBAWT-A1-0000-000VZ5 MLBAWT-H1-0000-000VZ5 MLBAWT-P1-0000-000VZ5 MLBAWT-U1-0000-000VZ5 MLBAWT-H1-0000-000VF6 MLBAWT-P1-0000-000VF6 ANSI Warm White (2600 K – 4300 K) F5 E5 4250 K 4000 K Z5 4000 K F6 3750 K E6 Z6 F7 E7 Z7 F8 E8 3500 K 3500 K 3250 K 3000 K 3000 K 2850 K 2700 K Z8 2700 K EA 2200 K J0 23.5 MLBAWT-A1-0000-000WF6 H0 18.1 MLBAWT-A1-0000-000VF6 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WE6 18.1 MLBAWT-A1-0000-000VE6 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WZ6 18.1 MLBAWT-A1-0000-000VZ6 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WF7 18.1 MLBAWT-A1-0000-000VF7 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WE7 H0 18.1 MLBAWT-A1-0000-000VE7 G0 13.9 J0 23.5 MLBAWT-A1-0000-000WZ7 H0 18.1 MLBAWT-A1-0000-000VZ7 G0 13.9 H0 18.1 18.1 MLBAWT-P1-0000-000VE6 MLBAWT-U1-0000-000VE6 MLBAWT-H1-0000-000VZ6 MLBAWT-P1-0000-000VZ6 MLBAWT-U1-0000-000VZ6 MLBAWT-U1-0000-000UZ6 H0 13.9 MLBAWT-H1-0000-000VE6 MLBAWT-U1-0000-000UE6 H0 G0 MLBAWT-U1-0000-000VF6 MLBAWT-U1-0000-000UF6 H0 H0 MLBAWT-H1-0000-000WE5 MLBAWT-H1-0000-000VF7 MLBAWT-H1-0000-000VE7 MLBAWT-H1-0000-000VZ7 MLBAWT-P1-0000-000VF7 MLBAWT-U1-0000-000VF7 MLBAWT-P1-0000-000UF7 MLBAWT-U1-0000-000UF7 MLBAWT-P1-0000-000VE7 MLBAWT-U1-0000-000VE7 MLBAWT-P1-0000-000UE7 MLBAWT-U1-0000-000UE7 MLBAWT-P1-0000-000VZ7 MLBAWT-U1-0000-000VZ7 MLBAWT-P1-0000-000UZ7 MLBAWT-U1-0000-000UZ7 MLBAWT-U1-0000-000VF8 MLBAWT-A1-0000-000VF8 MLBAWT-H1-0000-000VF8 MLBAWT-P1-0000-000VF8 MLBAWT-P1-0000-000UF8 MLBAWT-U1-0000-000UF8 MLBAWT-A1-0000-000VE8 MLBAWT-H1-0000-000VE8 MLBAWT-P1-0000-000VE8 MLBAWT-U1-0000-000VE8 MLBAWT-P1-0000-000UE8 MLBAWT-U1-0000-000UE8 MLBAWT-A1-0000-000VZ8 MLBAWT-H1-0000-000VZ8 MLBAWT-P1-0000-000VZ8 MLBAWT-U1-0000-000VZ8 MLBAWT-P1-0000-000UZ8 MLBAWT-U1-0000-000UZ8 G0 13.9 H0 18.1 G0 13.9 G0 13.9 MLBAWT-A1-0000-000UEA F0 10.7 MLBAWT-A1-0000-000TEA Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 15 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Parallel Cool White, TJ = 25 °C) XLamp ML-C Parallel LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 100 mA* Order Codes Code Flux (lm) 75 CRI Typical K3 35.2 K2 30.6 MLCAWT-A1-0000-0000DT J3 26.8 MLCAWT-A1-0000-000XDT 80 CRI Minimum ANSI Cool White (4500 K – 8300 K) DT E0 51 E1 50 DV E2 DY DZ E3 F4 E4 7000 K 7000 K 6500 K 6500 K 6200 K 6000 K 5750 K 5500 K 5000 K 5000 K 4750 K 4500 K MLCAWT-A1-0000-0001DT K3 35.2 MLCAWT-A1-0000-0001E0 K2 30.6 MLCAWT-A1-0000-0000E0 J3 26.8 MLCAWT-A1-0000-000XE0 K3 35.2 MLCAWT-A1-0000-000151 K2 30.6 MLCAWT-A1-0000-000051 J3 26.8 MLCAWT-A1-0000-000X51 K3 35.2 MLCAWT-A1-0000-0001E1 K2 30.6 MLCAWT-A1-0000-0000E1 MLCAWT-H1-0000-0000E1 J3 26.8 MLCAWT-A1-0000-000XE1 MLCAWT-H1-0000-000XE1 K3 35.2 MLCAWT-A1-0000-000150 K2 30.6 MLCAWT-A1-0000-000050 J3 26.8 MLCAWT-A1-0000-000X50 MLCAWT-A1-0000-0001DV K3 35.2 K2 30.6 MLCAWT-A1-0000-0000DV J3 26.8 MLCAWT-A1-0000-000XDV K3 35.2 MLCAWT-A1-0000-0001E2 K2 30.6 MLCAWT-A1-0000-0000E2 J3 26.8 MLCAWT-A1-0000-000XE2 K3 35.2 MLCAWT-A1-0000-0001DY K2 30.6 MLCAWT-A1-0000-0000DY J3 26.8 MLCAWT-A1-0000-000XDY K3 35.2 MLCAWT-A1-0000-0001DZ K2 30.6 MLCAWT-A1-0000-0000DZ J3 26.8 MLCAWT-A1-0000-000XDZ K3 35.2 MLCAWT-A1-0000-0001E3 K2 30.6 MLCAWT-A1-0000-0000E3 MLCAWT-H1-0000-0000E3 J3 26.8 MLCAWT-A1-0000-000XE3 MLCAWT-H1-0000-000XE3 K3 35.2 MLCAWT-A1-0000-0001F4 K2 30.6 MLCAWT-A1-0000-0000F4 J3 26.8 MLCAWT-A1-0000-000XF4 K3 35.2 MLCAWT-A1-0000-0001E4 K2 30.6 MLCAWT-A1-0000-0000E4 J3 26.8 MLCAWT-A1-0000-000XE4 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 16 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Parallel Warm White, TJ = 25 °C) XLamp ML-C Parallel LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 100 mA* Order Codes Code Flux (lm) 80 CRI Typical K2 30.6 MLCAWT-A1-0000-0000F5 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLCAWT-P1-0000-000WE5 MLCAWT-U1-0000-000WE5 ANSI Warm White (2600 K – 4300 K) F5 E5 Z5 F6 E6 Z6 F7 E7 Z7 4250 K 4000 K 4000 K 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K J3 26.8 MLCAWT-A1-0000-000XF5 K2 30.6 MLCAWT-A1-0000-0000E5 J3 26.8 MLCAWT-A1-0000-000XE5 J2 23.5 H0 18.1 MLCAWT-H1-0000-0000E5 MLCAWT-H1-0000-000XE5 MLCAWT-H1-0000-000WE5 MLCAWT-U1-0000-000VE5 K2 30.6 MLCAWT-A1-0000-0000Z5 MLCAWT-H1-0000-0000Z5 J3 26.8 MLCAWT-A1-0000-000XZ5 MLCAWT-H1-0000-000XZ5 J2 23.5 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000F6 MLCAWT-H1-0000-0000F6 J3 26.8 MLCAWT-A1-0000-000XF6 MLCAWT-H1-0000-000XF6 MLCAWT-H1-0000-000WZ5 MLCAWT-P1-0000-000WZ5 MLCAWT-U1-0000-000WZ5 MLCAWT-U1-0000-000VZ5 J2 23.5 MLCAWT-H1-0000-000WF6 MLCAWT-P1-0000-000WF6 MLCAWT-U1-0000-000WF6 H0 18.1 MLCAWT-H1-0000-000VF6 MLCAWT-P1-0000-000VF6 MLCAWT-U1-0000-000VF6 K2 30.6 MLCAWT-A1-0000-0000E6 J3 26.8 MLCAWT-A1-0000-000XE6 J2 23.5 MLCAWT-H1-0000-000WE6 MLCAWT-P1-0000-000WE6 MLCAWT-U1-0000-000WE6 H0 18.1 MLCAWT-H1-0000-000VE6 MLCAWT-P1-0000-000VE6 MLCAWT-U1-0000-000VE6 K2 30.6 MLCAWT-A1-0000-0000Z6 J3 26.8 MLCAWT-A1-0000-000XZ6 J2 23.5 MLCAWT-H1-0000-000WZ6 MLCAWT-P1-0000-000WZ6 MLCAWT-U1-0000-000WZ6 H0 18.1 MLCAWT-H1-0000-000VZ6 MLCAWT-P1-0000-000VZ6 MLCAWT-U1-0000-000VZ6 K2 30.6 MLCAWT-A1-0000-0000F7 MLCAWT-H1-0000-0000F7 J3 26.8 MLCAWT-A1-0000-000XF7 MLCAWT-H1-0000-000XF7 J2 23.5 MLCAWT-A1-0000-000WF7 MLCAWT-H1-0000-000WF7 MLCAWT-P1-0000-000WF7 MLCAWT-U1-0000-000WF7 MLCAWT-H1-0000-000VF7 MLCAWT-P1-0000-000VF7 MLCAWT-U1-0000-000VF7 MLCAWT-H1-0000-0000E6 MLCAWT-H1-0000-000XE6 MLCAWT-H1-0000-0000Z6 MLCAWT-H1-0000-000XZ6 H0 18.1 K2 30.6 MLCAWT-A1-0000-0000E7 MLCAWT-H1-0000-0000E7 J3 26.8 MLCAWT-A1-0000-000XE7 MLCAWT-H1-0000-000XE7 MLCAWT-A1-0000-000WE7 MLCAWT-H1-0000-000WE7 MLCAWT-P1-0000-000WE7 MLCAWT-U1-0000-000WE7 MLCAWT-H1-0000-000VE7 MLCAWT-P1-0000-000VE7 MLCAWT-U1-0000-000VE7 J2 23.5 H0 18.1 K2 30.6 J3 26.8 MLCAWT-A1-0000-000XZ7 MLCAWT-H1-0000-000XZ7 J2 23.5 MLCAWT-A1-0000-000WZ7 MLCAWT-H1-0000-000WZ7 MLCAWT-P1-0000-000WZ7 MLCAWT-U1-0000-000WZ7 H0 18.1 MLCAWT-H1-0000-000VZ7 MLCAWT-P1-0000-000VZ7 MLCAWT-U1-0000-000VZ7 MLCAWT-A1-0000-0000Z7 MLCAWT-H1-0000-0000Z7 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 17 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Parallel Warm White, TJ = 25 °C) - Continued XLamp ML-C Parallel LED, Standard Kit Codes - White Chromaticity Kit F8 E8 Z8 CCT 2850 K 2700 K 2700 K Minimum Luminous Flux (lm) @ 100 mA* Order Codes Code Flux (lm) 80 CRI Typical 80 CRI Minimum J3 26.8 MLCAWT-A1-0000-000XF8 MLCAWT-H1-0000-000XF8 85 CRI Minimum 90 CRI Minimum MLCAWT-A1-0000-000WF8 MLCAWT-H1-0000-000WF8 MLCAWT-P1-0000-000WF8 MLCAWT-U1-0000-000WF8 MLCAWT-H1-0000-000VF8 MLCAWT-P1-0000-000VF8 MLCAWT-U1-0000-000VF8 J2 23.5 H0 18.1 J3 26.8 MLCAWT-A1-0000-000XE8 MLCAWT-H1-0000-000XE8 MLCAWT-A1-0000-000WE8 MLCAWT-H1-0000-000WE8 MLCAWT-P1-0000-000WE8 MLCAWT-U1-0000-000WE8 MLCAWT-H1-0000-000VE8 MLCAWT-P1-0000-000VE8 MLCAWT-U1-0000-000VE8 J2 23.5 H0 18.1 J3 26.8 MLCAWT-A1-0000-000XZ8 MLCAWT-H1-0000-000XZ8 J2 23.5 MLCAWT-A1-0000-000WZ8 MLCAWT-H1-0000-000WZ8 MLCAWT-P1-0000-000WZ8 MLCAWT-U1-0000-000WZ8 H0 18.1 MLCAWT-H1-0000-000VZ8 MLCAWT-P1-0000-000VZ8 MLCAWT-U1-0000-000VZ8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 18 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Series Cool White, TJ = 25 °C) XLamp ML-C Series LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 75 CRI Typical 80 CRI Minimum K3 35.2 K2 30.6 MLCSWT-A1-0000-0000DT J3 26.8 MLCSWT-A1-0000-000XDT K3 35.2 MLCSWT-A1-0000-0001E0 K2 30.6 MLCSWT-A1-0000-0000E0 J3 26.8 MLCSWT-A1-0000-000XE0 K3 35.2 MLCSWT-A1-0000-000151 K2 30.6 MLCSWT-A1-0000-000051 J3 26.8 MLCSWT-A1-0000-000X51 K3 35.2 MLCSWT-A1-0000-0001E1 K2 30.6 MLCSWT-A1-0000-0000E1 MLCSWT-H1-0000-0000E1 J3 26.8 MLCSWT-A1-0000-000XE1 MLCSWT-H1-0000-000XE1 K3 35.2 MLCSWT-A1-0000-000150 K2 30.6 MLCSWT-A1-0000-000050 J3 26.8 MLCSWT-A1-0000-000X50 MLCSWT-A1-0000-0001DV ANSI Cool White (4500 K – 8300 K) DT E0 51 E1 50 DV E2 DY DZ E3 F4 E4 7000 K 7000 K 6500 K 6500 K 6200 K 6000 K 5750 K 5500 K 5000 K 5000 K 4750 K 4500 K MLCSWT-A1-0000-0001DT K3 35.2 K2 30.6 MLCSWT-A1-0000-0000DV J3 26.8 MLCSWT-A1-0000-000XDV K3 35.2 MLCSWT-A1-0000-0001E2 K2 30.6 MLCSWT-A1-0000-0000E2 J3 26.8 MLCSWT-A1-0000-000XE2 K3 35.2 MLCSWT-A1-0000-0001DY K2 30.6 MLCSWT-A1-0000-0000DY J3 26.8 MLCSWT-A1-0000-000XDY K3 35.2 MLCSWT-A1-0000-0001DZ K2 30.6 MLCSWT-A1-0000-0000DZ J3 26.8 MLCSWT-A1-0000-000XDZ K3 35.2 MLCSWT-A1-0000-0001E3 K2 30.6 MLCSWT-A1-0000-0000E3 MLCSWT-H1-0000-0000E3 J3 26.8 MLCSWT-A1-0000-000XE3 MLCSWT-H1-0000-000XE3 K3 35.2 MLCSWT-A1-0000-0001F4 K2 30.6 MLCSWT-A1-0000-0000F4 J3 26.8 MLCSWT-A1-0000-000XF4 K3 35.2 MLCSWT-A1-0000-0001E4 K2 30.6 MLCSWT-A1-0000-0000E4 J3 26.8 MLCSWT-A1-0000-000XE4 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 19 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Series Warm White, TJ = 25 °C) XLamp ML-C Series LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 80 CRI Typical K2 30.6 MLCSWT-A1-0000-0000F5 J3 26.8 MLCSWT-A1-0000-000XF5 K2 30.6 MLCSWT-A1-0000-0000E5 MLCSWT-A1-0000-000XE5 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLCSWT-P1-0000-000WE5 MLCSWT-U1-0000-000WE5 ANSI Warm White (2600 K – 4300 K) F5 E5 Z5 F6 E6 Z6 F7 E7 Z7 4250 K 4000 K 4000 K 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K J3 26.8 J2 23.5 H0 18.1 MLCSWT-H1-0000-0000E5 MLCSWT-H1-0000-000XE5 MLCSWT-H1-0000-000WE5 MLCSWT-U1-0000-000VE5 K2 30.6 MLCSWT-A1-0000-0000Z5 MLCSWT-H1-0000-0000Z5 J3 26.8 MLCSWT-A1-0000-000XZ5 MLCSWT-H1-0000-000XZ5 J2 23.5 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000F6 MLCSWT-H1-0000-0000F6 J3 26.8 MLCSWT-A1-0000-000XF6 MLCSWT-H1-0000-000XF6 MLCSWT-H1-0000-000WZ5 MLCSWT-P1-0000-000WZ5 MLCSWT-U1-0000-000WZ5 MLCSWT-U1-0000-000VZ5 J2 23.5 MLCSWT-H1-0000-000WF6 MLCSWT-P1-0000-000WF6 MLCSWT-U1-0000-000WF6 H0 18.1 MLCSWT-H1-0000-000VF6 MLCSWT-P1-0000-000VF6 MLCSWT-U1-0000-000VF6 K2 30.6 MLCSWT-A1-0000-0000E6 MLCSWT-A1-0000-000XE6 MLCSWT-H1-0000-0000E6 J3 26.8 J2 23.5 MLCSWT-H1-0000-000WE6 MLCSWT-H1-0000-000XE6 MLCSWT-P1-0000-000WE6 MLCSWT-U1-0000-000WE6 H0 18.1 MLCSWT-H1-0000-000VE6 MLCSWT-P1-0000-000VE6 MLCSWT-U1-0000-000VE6 K2 30.6 MLCSWT-A1-0000-0000Z6 J3 26.8 MLCSWT-A1-0000-000XZ6 J2 23.5 MLCSWT-H1-0000-000WZ6 MLCSWT-P1-0000-000WZ6 MLCSWT-U1-0000-000WZ6 H0 18.1 MLCSWT-H1-0000-000VZ6 MLCSWT-P1-0000-000VZ6 MLCSWT-U1-0000-000VZ6 K2 30.6 MLCSWT-A1-0000-0000F7 MLCSWT-H1-0000-0000F7 J3 26.8 MLCSWT-A1-0000-000XF7 MLCSWT-H1-0000-000XF7 J2 23.5 MLCSWT-A1-0000-000WF7 MLCSWT-H1-0000-000WF7 MLCSWT-P1-0000-000WF7 MLCSWT-U1-0000-000WF7 MLCSWT-H1-0000-000VF7 MLCSWT-P1-0000-000VF7 MLCSWT-U1-0000-000VF7 MLCSWT-H1-0000-0000Z6 MLCSWT-H1-0000-000XZ6 H0 18.1 K2 30.6 MLCSWT-A1-0000-0000E7 MLCSWT-H1-0000-0000E7 J3 26.8 MLCSWT-A1-0000-000XE7 MLCSWT-H1-0000-000XE7 MLCSWT-A1-0000-000WE7 MLCSWT-H1-0000-000WE7 MLCSWT-P1-0000-000WE7 MLCSWT-U1-0000-000WE7 MLCSWT-H1-0000-000VE7 MLCSWT-P1-0000-000VE7 MLCSWT-U1-0000-000VE7 J2 23.5 H0 18.1 K2 30.6 J3 26.8 MLCSWT-A1-0000-000XZ7 MLCSWT-H1-0000-000XZ7 J2 23.5 MLCSWT-A1-0000-000WZ7 MLCSWT-H1-0000-000WZ7 MLCSWT-P1-0000-000WZ7 MLCSWT-U1-0000-000WZ7 H0 18.1 MLCSWT-H1-0000-000VZ7 MLCSWT-P1-0000-000VZ7 MLCSWT-U1-0000-000VZ7 MLCSWT-A1-0000-0000Z7 MLCSWT-H1-0000-0000Z7 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 20 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-C Series Warm White, TJ = 25 °C) - Continued XLamp ML-C Series LED, Standard Kit Codes - White Chromaticity Kit F8 E8 Z8 CCT 2850 K 2700 K 2700 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 80 CRI Typical 80 CRI Minimum J3 26.8 MLCSWT-A1-0000-000XF8 MLCSWT-H1-0000-000XF8 85 CRI Minimum 90 CRI Minimum MLCSWT-A1-0000-000WF8 MLCSWT-H1-0000-000WF8 MLCSWT-P1-0000-000WF8 MLCSWT-U1-0000-000WF8 MLCSWT-H1-0000-000VF8 MLCSWT-P1-0000-000VF8 MLCSWT-U1-0000-000VF8 J2 23.5 H0 18.1 J3 26.8 MLCSWT-A1-0000-000XE8 MLCSWT-H1-0000-000XE8 MLCSWT-A1-0000-000WE8 MLCSWT-H1-0000-000WE8 MLCSWT-P1-0000-000WE8 MLCSWT-U1-0000-000WE8 MLCSWT-H1-0000-000VE8 MLCSWT-P1-0000-000VE8 MLCSWT-U1-0000-000VE8 J2 23.5 H0 18.1 J3 26.8 MLCSWT-A1-0000-000XZ8 MLCSWT-H1-0000-000XZ8 J2 23.5 MLCSWT-A1-0000-000WZ8 MLCSWT-H1-0000-000WZ8 MLCSWT-P1-0000-000WZ8 MLCSWT-U1-0000-000WZ8 H0 18.1 MLCSWT-H1-0000-000VZ8 MLCSWT-P1-0000-000VZ8 MLCSWT-U1-0000-000VZ8 Standard Order Codes and Bins (ML-C Color, TJ = 25 °C) XLamp ML-C LED Standard Kit Codes - Royal Blue Royal Blue Kit Minimum Radiant Flux (lm) @ 100 mA* Dominant Wavelengh (nm) Code Order Codes Flux (mW) 01 450 - 465 07 100 02 450 - 460 07 100 MLCROY-A1-0000-000201 MLCROY-A1-0000-000202 03 455 - 465 07 100 MLCROY-A1-0000-000203 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 21 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Parallel Cool White, TJ = 25 °C) XLamp ML-E Parallel LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 150 mA* Order Codes Code Flux (lm) 75 CRI Typical N3 56.8 MLEAWT-A1-0000-0005DT N2 51.7 MLEAWT-A1-0000-0004DT M3 45.7 MLEAWT-A1-0000-0003DT M2 39.8 MLEAWT-A1-0000-0002DT N3 56.8 MLEAWT-A1-0000-0005E0 N2 51.7 MLEAWT-A1-0000-0004E0 M3 45.7 MLEAWT-A1-0000-0003E0 N3 56.8 MLEAWT-A1-0000-000551 N2 51.7 MLEAWT-A1-0000-000451 M3 45.7 MLEAWT-A1-0000-000351 N3 56.8 MLEAWT-A1-0000-0005E1 N2 51.7 MLEAWT-A1-0000-0004E1 80 CRI Minimum ANSI Cool White (4500 K – 8300 K) DT E0 51 E1 50 DV E2 53 DY DZ 7000 K 7000 K 6500 K 6500 K 6200 K 6000 K 5750 K 5700K 5500 K 5000 K M3 45.7 MLEAWT-A1-0000-0003E1 M2 39.8 MLEAWT-A1-0000-0002E1 N3 56.8 MLEAWT-A1-0000-000550 N2 51.7 MLEAWT-A1-0000-000450 M3 45.7 MLEAWT-A1-0000-000350 N3 56.8 MLEAWT-A1-0000-0005DV N2 51.7 MLEAWT-A1-0000-0004DV M3 45.7 MLEAWT-A1-0000-0003DV M2 39.8 MLEAWT-A1-0000-0002DV N3 56.8 MLEAWT-A1-0000-0005E2 N2 51.7 MLEAWT-A1-0000-0004E2 M3 45.7 MLEAWT-A1-0000-0003E2 M2 39.8 MLEAWT-A1-0000-0002E2 N3 56.8 MLEAWT-A1-0000-000553 N2 51.7 MLEAWT-A1-0000-000453 M3 45.7 MLEAWT-A1-0000-000353 N3 56.8 MLEAWT-A1-0000-0005DY N2 51.7 MLEAWT-A1-0000-0004DY M3 45.7 MLEAWT-A1-0000-0003DY M2 39.8 MLEAWT-A1-0000-0002DY N3 56.8 MLEAWT-A1-0000-0005DZ N2 51.7 MLEAWT-A1-0000-0004DZ M3 45.7 MLEAWT-A1-0000-0003DZ M2 39.8 MLEAWT-A1-0000-0002DZ MLEAWT-H1-0000-0003E1 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 22 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Parallel Cool White, TJ = 25 °C) - Continued XLamp ML-E Parallel LED, Standard Kit Codes - White Minimum Luminous Flux (lm) @ 150 mA* Chromaticity Kit E3 F4 E4 CCT 5000 K 4750 K 4500 K Order Codes Code Flux (lm) 75 CRI Typical N3 56.8 MLEAWT-A1-0000-0005E3 80 CRI Minimum N2 51.7 MLEAWT-A1-0000-0004E3 MLEAWT-H1-0000-0004E3 M3 45.7 MLEAWT-A1-0000-0003E3 MLEAWT-H1-0000-0003E3 M2 39.8 MLEAWT-A1-0000-0002E3 MLEAWT-H1-0000-0002E3 N3 56.8 MLEAWT-A1-0000-0005F4 N2 51.7 MLEAWT-A1-0000-0004F4 M3 45.7 MLEAWT-A1-0000-0003F4 M2 39.8 MLEAWT-A1-0000-0002F4 N3 56.8 MLEAWT-A1-0000-0005E4 N2 51.7 MLEAWT-A1-0000-0004E4 M3 45.7 MLEAWT-A1-0000-0003E4 M2 39.8 MLEAWT-A1-0000-0002E4 Standard Order Codes and Bins (ML-E Parallel Warm White, TJ = 25 °C) XLamp ML-E Parallel LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 150 mA* Order Codes Code Flux (lm) 80 CRI Typical N2 51.7 MLEAWT-A1-0000-0004F5 M3 45.7 MLEAWT-A1-0000-0003F5 M2 39.8 MLEAWT-A1-0000-0002F5 N2 51.7 MLEAWT-A1-0000-0004E5 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K – 4300 K) F5 E5 Z5 F6 4250 K 4000 K 4000 K 3750 K M3 45.7 MLEAWT-A1-0000-0003E5 MLEAWT-H1-0000-0003E5 MLEAWT-P1-0000-0003E5 M2 39.8 MLEAWT-A1-0000-0002E5 MLEAWT-H1-0000-0002E5 MLEAWT-P1-0000-0002E5 MLEAWT-U1-0000-0002E5 MLEAWT-H1-0000-0001E5 MLEAWT-P1-0000-0001E5 MLEAWT-U1-0000-0001E5 K3 35.2 N2 51.7 MLEAWT-A1-0000-0004Z5 M3 45.7 MLEAWT-A1-0000-0003Z5 MLEAWT-H1-0000-0003Z5 MLEAWT-P1-0000-0003Z5 M2 39.8 MLEAWT-A1-0000-0002Z5 MLEAWT-H1-0000-0002Z5 MLEAWT-P1-0000-0002Z5 MLEAWT-U1-0000-0002Z5 K3 35.2 MLEAWT-H1-0000-0001Z5 MLEAWT-P1-0000-0001Z5 MLEAWT-U1-0000-0001Z5 M3 45.7 MLEAWT-A1-0000-0003F6 M2 39.8 MLEAWT-A1-0000-0002F6 MLEAWT-H1-0000-0002F6 MLEAWT-P1-0000-0002F6 MLEAWT-U1-0000-0002F6 K3 35.2 MLEAWT-H1-0000-0001F6 MLEAWT-P1-0000-0001F6 MLEAWT-U1-0000-0001F6 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 23 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Parallel Warm White, TJ = 25 °C) - Continued XLamp ML-E Parallel LED, Standard Kit Codes - White Chromaticity Kit E6 Z6 F7 E7 Z7 F8 E8 Z8 CCT 3500 K 3500 K 3250 K 3000 K 3000 K 2850 K 2700 K 2700 K Minimum Luminous Flux (lm) @ 150 mA* Order Codes Code Flux (lm) 80 CRI Typical M3 45.7 MLEAWT-A1-0000-0003E6 M2 39.8 MLEAWT-A1-0000-0002E6 K3 35.2 M3 45.7 MLEAWT-A1-0000-0003Z6 M2 39.8 MLEAWT-A1-0000-0002Z6 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLEAWT-H1-0000-0002E6 MLEAWT-P1-0000-0002E6 MLEAWT-U1-0000-0002E6 MLEAWT-H1-0000-0001E6 MLEAWT-P1-0000-0001E6 MLEAWT-U1-0000-0001E6 MLEAWT-H1-0000-0002Z6 MLEAWT-P1-0000-0002Z6 MLEAWT-U1-0000-0002Z6 MLEAWT-H1-0000-0001Z6 MLEAWT-P1-0000-0001Z6 MLEAWT-U1-0000-0001Z6 K3 35.2 M3 45.7 MLEAWT-A1-0000-0003F7 M2 39.8 MLEAWT-A1-0000-0002F7 MLEAWT-H1-0000-0002F7 MLEAWT-P1-0000-0002F7 MLEAWT-U1-0000-0002F7 K3 35.2 MLEAWT-A1-0000-0001F7 MLEAWT-H1-0000-0001F7 MLEAWT-P1-0000-0001F7 MLEAWT-U1-0000-0001F7 K2 30.6 MLEAWT-H1-0000-0000F7 MLEAWT-P1-0000-0000F7 MLEAWT-U1-0000-0000F7 M3 45.7 MLEAWT-A1-0000-0003E7 M2 39.8 MLEAWT-A1-0000-0002E7 MLEAWT-H1-0000-0002E7 MLEAWT-P1-0000-0002E7 MLEAWT-U1-0000-0002E7 K3 35.2 MLEAWT-A1-0000-0001E7 MLEAWT-H1-0000-0001E7 MLEAWT-P1-0000-0001E7 MLEAWT-U1-0000-0001E7 K2 30.6 MLEAWT-H1-0000-0000E7 MLEAWT-P1-0000-0000E7 MLEAWT-U1-0000-0000E7 M3 45.7 MLEAWT-A1-0000-0003Z7 M2 39.8 MLEAWT-A1-0000-0002Z7 MLEAWT-H1-0000-0002Z7 MLEAWT-P1-0000-0002Z7 MLEAWT-U1-0000-0002Z7 K3 35.2 MLEAWT-A1-0000-0001Z7 MLEAWT-H1-0000-0001Z7 MLEAWT-P1-0000-0001Z7 MLEAWT-U1-0000-0001Z7 K2 30.6 MLEAWT-H1-0000-0000Z7 MLEAWT-P1-0000-0000Z7 MLEAWT-U1-0000-0000Z7 M2 39.8 MLEAWT-A1-0000-0002F8 MLEAWT-H1-0000-0002F8 K3 35.2 MLEAWT-A1-0000-0001F8 MLEAWT-H1-0000-0001F8 MLEAWT-P1-0000-0001F8 MLEAWT-U1-0000-0001F8 K2 30.6 MLEAWT-H1-0000-0000F8 MLEAWT-P1-0000-0000F8 MLEAWT-U1-0000-0000F8 M3 45.7 M2 39.8 MLEAWT-A1-0000-0002E8 MLEAWT-H1-0000-0002E8 K3 35.2 MLEAWT-A1-0000-0001E8 MLEAWT-H1-0000-0001E8 MLEAWT-P1-0000-0001E8 MLEAWT-U1-0000-0001E8 MLEAWT-H1-0000-0000E8 MLEAWT-P1-0000-0000E8 MLEAWT-U1-0000-0000E8 MLEAWT-H1-0000-0001Z8 MLEAWT-P1-0000-0001Z8 MLEAWT-U1-0000-0001Z8 MLEAWT-H1-0000-0000Z8 MLEAWT-P1-0000-0000Z8 MLEAWT-U1-0000-0000Z8 MLEAWT-H1-0000-0003E8 K2 30.6 M2 39.8 MLEAWT-A1-0000-0002Z8 K3 35.2 MLEAWT-A1-0000-0001Z8 K2 30.6 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 24 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Series Cool White, TJ = 25 °C) XLamp ML-E Series LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 75 CRI Typical N2 51.7 MLESWT-A1-0000-0004DT M3 45.7 MLESWT-A1-0000-0003DT N2 51.7 MLESWT-A1-0000-0004E0 M3 45.7 MLESWT-A1-0000-0003E0 N2 51.7 MLESWT-A1-0000-000451 M3 45.7 MLESWT-A1-0000-000351 80 CRI Minimum ANSI Cool White (4500 K – 8300 K) DT E0 7000 K 7000 K 51 6500 K E1 6500 K 50 6200 K DV 6000 K E2 5750 K DY DZ E3 F4 E4 5500 K 5000 K 5000 K 4750 K 4500 K N2 51.7 MLESWT-A1-0000-0004E1 M3 45.7 MLESWT-A1-0000-0003E1 N2 51.7 MLESWT-A1-0000-000450 M3 45.7 MLESWT-A1-0000-000350 N2 51.7 MLESWT-A1-0000-0004DV M3 45.7 MLESWT-A1-0000-0003DV MLESWT-A1-0000-0004E2 N2 51.7 M3 45.7 MLESWT-A1-0000-0003E2 N2 51.7 MLESWT-A1-0000-0004DY M3 45.7 MLESWT-A1-0000-0003DY N2 51.7 MLESWT-A1-0000-0004DZ M3 45.7 MLESWT-A1-0000-0003DZ N2 51.7 MLESWT-A1-0000-0004E3 MLESWT-H1-0000-0004E3 M3 45.7 MLESWT-A1-0000-0003E3 MLESWT-H1-0000-0003E3 M2 39.8 MLESWT-A1-0000-0002E3 MLESWT-H1-0000-0002E3 N2 51.7 MLESWT-A1-0000-0004F4 M3 45.7 MLESWT-A1-0000-0003F4 M2 39.8 MLESWT-A1-0000-0002F4 N2 51.7 MLESWT-A1-0000-0004E4 M3 45.7 MLESWT-A1-0000-0003E4 M2 39.8 MLESWT-A1-0000-0002E4 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 25 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Series Warm White, TJ = 25 °C) XLamp ML-E Series LED, Standard Kit Codes - White Chromaticity Kit CCT Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 80 CRI Typical N2 51.7 MLESWT-A1-0000-0004F5 M3 45.7 MLESWT-A1-0000-0003F5 M2 39.8 MLESWT-A1-0000-0002F5 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum ANSI Warm White (2600 K – 4300 K) F5 E5 Z5 F6 E6 Z6 F7 E7 Z7 F8 4250 K 4000 K 4000 K 3750 K 3500 K 3500 K 3250 K 3000 K 3000 K 2850 K N2 51.7 MLESWT-A1-0000-0004E5 M3 45.7 MLESWT-A1-0000-0003E5 MLESWT-H1-0000-0003E5 MLESWT-P1-0000-0003E5 M2 39.8 MLESWT-A1-0000-0002E5 MLESWT-H1-0000-0002E5 MLESWT-P1-0000-0002E5 MLESWT-U1-0000-0002E5 K3 35.2 MLESWT-H1-0000-0001E5 MLESWT-P1-0000-0001E5 MLESWT-U1-0000-0001E5 N2 51.7 M3 45.7 MLESWT-A1-0000-0004Z5 MLESWT-A1-0000-0003Z5 MLESWT-H1-0000-0003Z5 MLESWT-P1-0000-0003Z5 M2 39.8 MLESWT-A1-0000-0002Z5 MLESWT-H1-0000-0002Z5 MLESWT-P1-0000-0002Z5 MLESWT-U1-0000-0002Z5 MLESWT-H1-0000-0001Z5 MLESWT-P1-0000-0001Z5 MLESWT-U1-0000-0001Z5 MLESWT-H1-0000-0002F6 MLESWT-P1-0000-0002F6 MLESWT-U1-0000-0002F6 MLESWT-H1-0000-0001F6 MLESWT-P1-0000-0001F6 MLESWT-U1-0000-0001F6 MLESWT-H1-0000-0002E6 MLESWT-P1-0000-0002E6 MLESWT-U1-0000-0002E6 MLESWT-H1-0000-0001E6 MLESWT-P1-0000-0001E6 MLESWT-U1-0000-0001E6 MLESWT-H1-0000-0002Z6 MLESWT-P1-0000-0002Z6 MLESWT-U1-0000-0002Z6 MLESWT-H1-0000-0001Z6 MLESWT-P1-0000-0001Z6 MLESWT-U1-0000-0001Z6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003F6 M2 39.8 MLESWT-A1-0000-0002F6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003E6 M2 39.8 MLESWT-A1-0000-0002E6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003Z6 M2 39.8 MLESWT-A1-0000-0002Z6 K3 35.2 M3 45.7 MLESWT-A1-0000-0003F7 M2 39.8 MLESWT-A1-0000-0002F7 MLESWT-H1-0000-0002F7 MLESWT-P1-0000-0002F7 MLESWT-U1-0000-0002F7 K3 35.2 MLESWT-A1-0000-0001F7 MLESWT-H1-0000-0001F7 MLESWT-P1-0000-0001F7 MLESWT-U1-0000-0001F7 MLESWT-H1-0000-0000F7 MLESWT-P1-0000-0000F7 MLESWT-U1-0000-0000F7 K2 30.6 M3 45.7 MLESWT-A1-0000-0003E7 M2 39.8 MLESWT-A1-0000-0002E7 MLESWT-H1-0000-0002E7 MLESWT-P1-0000-0002E7 MLESWT-U1-0000-0002E7 K3 35.2 MLESWT-A1-0000-0001E7 MLESWT-H1-0000-0001E7 MLESWT-P1-0000-0001E7 MLESWT-U1-0000-0001E7 K2 30.6 MLESWT-H1-0000-0000E7 MLESWT-P1-0000-0000E7 MLESWT-U1-0000-0000E7 M3 45.7 MLESWT-A1-0000-0003Z7 M2 39.8 MLESWT-A1-0000-0002Z7 MLESWT-H1-0000-0002Z7 MLESWT-P1-0000-0002Z7 MLESWT-U1-0000-0002Z7 K3 35.2 MLESWT-A1-0000-0001Z7 MLESWT-H1-0000-0001Z7 MLESWT-P1-0000-0001Z7 MLESWT-U1-0000-0001Z7 K2 30.6 MLESWT-H1-0000-0000Z7 MLESWT-P1-0000-0000Z7 MLESWT-U1-0000-0000Z7 M2 39.8 MLESWT-A1-0000-0002F8 K3 35.2 MLESWT-A1-0000-0001F8 MLESWT-H1-0000-0001F8 MLESWT-P1-0000-0001F8 MLESWT-U1-0000-0001F8 K2 30.6 MLESWT-H1-0000-0000F8 MLESWT-P1-0000-0000F8 MLESWT-U1-0000-0000F8 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 26 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Series,Warm White, TJ = 25 °C) - Continued XLamp ML-E Series LED, Standard Kit Codes - White Chromaticity Kit E8 Z8 CCT 2700 K 2700 K Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) 80 CRI Typical M2 39.8 MLESWT-A1-0000-0002E8 K3 35.2 MLESWT-A1-0000-0001E8 K2 30.6 M2 39.8 MLESWT-A1-0000-0002Z8 K3 35.2 MLESWT-A1-0000-0001Z8 K2 30.6 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum MLESWT-H1-0000-0001E8 MLESWT-P1-0000-0001E8 MLESWT-U1-0000-0001E8 MLESWT-H1-0000-0000E8 MLESWT-P1-0000-0000E8 MLESWT-U1-0000-0000E8 MLESWT-H1-0000-0001Z8 MLESWT-P1-0000-0001Z8 MLESWT-U1-0000-0001Z8 MLESWT-H1-0000-0000Z8 MLESWT-P1-0000-0000Z8 MLESWT-U1-0000-0000Z8 Standard Order Codes and Bins (ML-E Parallel Color, TJ = 25 °C) XLamp ML-E Parallel LED, Standard Kit Codes - Royal Blue Royal Blue Kit Dominant Wavelengh (nm) 01 450 - 465 02 450 - 460 03 455 - 465 04 450-455 05 06 455-460 460-465 Minimum Radiant Flux (lm) @ 150 mA* Code Order Codes Flux (mW) 10 175 MLEROY-A1-0000-000501 9 147 MLEROY-A1-0000-000401 10 175 MLEROY-A1-0000-000502 9 147 MLEROY-A1-0000-000402 10 175 MLEROY-A1-0000-000503 9 147 MLEROY-A1-0000-000403 10 175 MLEROY-A1-0000-000504 9 147 MLEROY-A1-0000-000404 10 175 MLEROY-A1-0000-000505 9 147 MLEROY-A1-0000-000405 10 175 MLEROY-A1-0000-000506 9 147 MLEROY-A1-0000-000406 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 27 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Parallel Color, TJ = 25 °C) - Continued XLamp ML-E Parallel LED, Standard Kit Codes - Blue Blue Kit Dominant Wavelengh (nm) 01 465 - 485 02 465 - 480 05 470 - 480 Minimum Luminous Flux (lm) @ 150 mA* Code Flux (lm) G0 13.9 Order Codes MLEBLU-A1-0000-000U01 F0 10.7 MLEBLU-A1-0000-000T01 G0 13.9 MLEBLU-A1-0000-000U02 F0 10.7 MLEBLU-A1-0000-000T02 G0 13.9 MLEBLU-A1-0000-000U05 F0 10.7 MLEBLU-A1-0000-000T05 XLamp ML-E Parallel LED, Standard Kit Codes - Green Green Kit 01 02 03 Dominant Wavelengh (nm) 520 - 535 520 - 530 525 - 535 Minimum Luminous Flux (lm) @ 150 mA* Code Flux (lm) K3 35.2 Order Codes MLEGRN-A1-0000-000101 K2 30.6 MLEGRN-A1-0000-000001 J3 26.8 MLEGRN-A1-0000-000X01 K3 35.2 MLEGRN-A1-0000-000102 K2 30.6 MLEGRN-A1-0000-000002 MLEGRN-A1-0000-000X02 J3 26.8 K3 35.2 MLEGRN-A1-0000-000103 K2 30.6 MLEGRN-A1-0000-000003 J3 26.8 MLEGRN-A1-0000-000X03 XLamp ML-E Parallel LED, Standard Kit Codes - Amber Amber Kit Dominant Wavelengh (nm) 01 585 - 595 Minimum Luminous Flux (lm) @ 150 mA* Order Codes Code Flux (lm) J3 26.8 MLEAMB-A1-0000-000X01 J2 23.5 MLEAMB-A1-0000-000W01 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 28 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Parallel Color, TJ = 25 °C) - Continued XLamp ML-E Parallel LED, Standard Kit Codes - Red Minimum Luminous Flux (lm) @ 150 mA* Red Kit Dominant Wavelengh (nm) 01 620 - 630 02 620 - 625 03 625 - 630 Order Codes Code Flux (lm) J2 23.5 H0 18.1 MLERED-A1-0000-000V01 J2 23.5 MLERED-A1-0000-000W02 H0 18.1 MLERED-A1-0000-000V02 J2 23.5 MLERED-A1-0000-000W03 H0 18.1 MLERED-A1-0000-000V03 MLERED-A1-0000-000W01 Standard Order Codes and Bins (ML-E Series Color, TJ = 25 °C) XLamp ML-E Series LED, Standard Kit Codes - Blue Blue Kit Dominant Wavelengh (nm) 01 465 - 485 02 05 465 - 480 470 - 480 Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) G0 13.9 F0 10.7 MLESBL-A1-0000-000T01 G0 13.9 MLESBL-A1-0000-000U02 MLESBL-A1-0000-000U01 F0 10.7 MLESBL-A1-0000-000T02 G0 13.9 MLESBL-A1-0000-000U05 F0 10.7 MLESBL-A1-0000-000T05 XLamp ML-E Series LED, Standard Kit Codes - Green Green Kit Dominant Wavelengh (nm) 01 520 - 535 02 03 520 - 530 525 - 535 Minimum Luminous Flux (lm) @ 50 mA* Order Codes Code Flux (lm) K3 35.2 K2 30.6 MLESGN-A1-0000-000001 J3 26.8 MLESGN-A1-0000-000X01 K3 35.2 MLESGN-A1-0000-000102 K2 30.6 MLESGN-A1-0000-000002 J3 26.8 MLESGN-A1-0000-000X02 K3 35.2 MLESGN-A1-0000-000103 K2 30.6 MLESGN-A1-0000-000003 J3 26.8 MLESGN-A1-0000-000X03 MLESGN-A1-0000-000101 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 29 XLamp ® ML Family LED Binning & Labeling Standard Order Codes and Bins (ML-E Series Color, TJ = 25 °C) - Continued XLamp ML-E Series LED, Standard Kit Codes - Amber Amber Kit Dominant Wavelengh (nm) 01 585 - 595 Minimum Luminous Flux (lm) @ 37.5 mA* Order Codes Code Flux (lm) J3 26.8 MLESAM-A1-0000-000X01 J2 23.5 MLESAM-A1-0000-000W01 XLamp ML-E Series LED, Standard Kit Codes - Red Red Kit Dominant Wavelengh (nm) 01 620 - 630 02 620 - 625 03 625-630 Minimum Luminous Flux (lm) @ 37.5 mA* Code Flux (lm) Order Codes J2 23.5 MLESRD-A1-0000-000W01 H0 18.1 MLESRD-A1-0000-000V01 MLESRD-A1-0000-000W02 J2 23.5 H0 18.1 MLESRD-A1-0000-000V02 J2 23.5 MLESRD-A1-0000-000W03 H0 18.1 MLESRD-A1-0000-000V03 Notes: • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. • Typical CRI for Cool White order codes is 75; Typical CRI for Warm White order codes is 80. * Cree XLamp LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2009-2015 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp®, are registered trademarks of Cree, Inc. This document is provided for informational purposes only and is not a warranty or a specification. For product specifications, please see the data sheets available at www.cree.com. For warranty information, please contact Cree Sales at [email protected]. 30