miniature aluminum electrolytic capacitors

2015-4장-02 2015.1.20 03:50 PM 페이지175 태산아이인쇄그룹(국) 2261-2488 2400DPI 175LPI
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
NH
For Horizontal Deflection Current Correction
Series
Non-polarized
Solvent Proof
・Designed for horizontal deflection current correction in TV,
monitor or computer
・Stable characteristics at high frequency and high ripple current
・Complied to the RoHS directive
Item
Characteristics
Operating temperature range
-40 ~ +105°
C
Leakage current max.
I = 0.03CV+50μA (after 5 minutes)
Capacitance tolerance
±10, ±20% at 120Hz, 20°
C
Dissipation factor max.
0.04 max. at 120Hz, 20°
C
Z-25°
C/Z+20°
C
Z-40°
C/Z+20°
C
Low temperature characteristics
(Impedance ratio at 120Hz)
1.5
3.0
Less than specified value
Within ±15% of initial value
Less than 200% of specified value
Polarity reverse each 250 hours
Leakage current
Capacitance change
tanδ
Test method
Load life
(after application of DC 12V
superimposed with specified
ripple current)
NH series are for 2000 hours at 105°
C
After 1000 hours no load test, leakage current, capacitance and tanδare same as load life value.
The measurement shall be performed at 20°
C by the KS C IEC 60384 - 4
Shelf life (at 105°
C)
● DRAWING
Unit : mm
Ød±0.05 Tinned copper-ply wire
ØD
10
12.5
16
18
P
5.0
5.0
7.5
7.5
Ød
0.6
0.6
0.8
0.8
P±0.5
L+2.0 max.
15 min.
MINIATURE TYPES
ØD+0.5 max.
Insulating sleeve
4 min.
Safety vent
● DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT
μF
WV
25, 50
1. 0
1. 5
2.2
3.3
4.7
6.8
8.2
10
10× 20
12.5× 20
12.5× 25
16× 25
16× 31.5
16 ×35.5
16 ×40
18 ×40
10.4
10.7
2.3
3.1
4.8
6.5
8.6
10.6
Case size ØD×L (mm)
Ripple current (Ap-p) at 85°
C, 15.75kHz
175