RFMD Datasheet Template

D8740200GT
D8740200GT
GaAs Power Doubler Hybrid
40MHz to 870MHz
Package: SOT-115J
The D8740200GT is a Hybrid Power Doubler amplifier
module. The part employs GaAs die and is operated from
40MHz to 870MHz. It provides excellent linearity and superior
return loss performance with low noise and optimal reliability.
Features
■
Excellent Linearity
■
Superior Return Loss Performance
■
Extremely Low Distortion
■
Optimal Reliability
■
Low Noise
■
Unconditionally Stable Under All
Terminations
■
20.5dB Min. Gain at 870MHz
■
375mA Max. at 24VDC
Applications
■
40MHz to 870MHz CATV Amplifier
Systems
Ordering Information
D8740200GT
Box with 50 pieces
Absolute Maximum Ratings
Parameter
Rating
Unit
RF Input Voltage (single tone)
75
dBmV
DC Supply Over-Voltage (5 minutes)
30
V
Storage Temperature
-40 to +100
°C
Operating Mounting Base Temperature
-30 to +100
°C
Caution! ESD sensitive device.
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implie
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS140113
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 3
D8740200GT
Nominal Operating Parameters
Specification
Parameter
Unit
Min
Typ
Condition
Max
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
General Performance
19.5
20.0
21.5
dB
f = 50MHz
20.5
21.0
21.5
dB
f = 870MHz
0.6
1.0
1.4
dB
f = 40MHz to 870MHz
0.6
dB
f = 40MHz to 870MHz (Peak to Valley)
20.0
dB
f = 40MHz to 320MHz
19.0
dB
f = 320MHz to 640MHz
17.0
dB
f = 640MHz to 870MHz
20.0
dB
f = 40MHz to 320MHz
19.0
dB
f = 320MHz to 640MHz
18.0
dB
f = 640MHz to 870MHz
f = 50MHz to 870MHz
Power Gain
[1]
Slope
Flatness of Frequency Response
Input Return Loss
Output Return Loss
Noise Figure
Total Current Consumption (DC)
5.5
6.5
dB
350.0
375.0
mA
V+ = 24V; TMB = 30°C; ZS = ZL = 75Ω
Distortion Data 40MHz to 750MHz
CTB
-62
-60
dBc
XMOD
-57
-55
dBc
CSO
-65
-63
dBc
112 ch 10dB tilted; V0 = 50dBmV at 750MHz[2]
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 112 channels, NTSC frequency raster: 55.25MHz to 745.25MHz, +40dBmV to +50dBmV tilted output level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA.
Composite Triple Beat (CTB) - The CTB parameter is defined by the NCTA.
Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140113
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3
D8740200GT
Package Drawing (Dimensions in millimeters)
I
U
123 5 7 89
C
E
J
S
P
R
M
K
O
T
Q
øG
N
D
0
B
5 10mm
scale
H
L
F
A
Notes:
European
Projection
Pinning:
Pin
Name
1
Input
2-3
GND
4
5
+VB
6
Nominal
Min
Max
A
44,6 ± 0,2
44,4
44,8
B
13,6 ± 0,2
13,4
44,4
13,8
C
20,4 ± 0,5
19,9
20,9
D
8 ± 0,15
7,85
8,15
E
12,6 ± 0,15
12,45
12,75
F
38,1 ± 0,2
37,9
38,3
G
4 +0,2 / -0,05
3,95
4,2
H
4 ± 0,2
3,8
4,2
I
25,4 ± 0,2
25,2
25,6
J
UNC 6-32
-
-
K
4,2 ± 0,2
4,0
4,4
L
27,2 ± 0,2
27,0
27,4
M
11,6 ± 0,5
11,1
12,1
N
5,8 ± 0,4
5,4
6,2
O
0,25 ± 0,02
0,23
0,27
P
0,45 ± 0,03
0,42
0,48
Q
2,54 ± 0,3
2,24
2,84
R
2,54 ± 0,5
2,04
3,04
S
2,54 ± 0,25
2,29
2,79
7-8
GND
T
5,08 ± 0,25
4,83
5,33
9
Output
U
5,08 ± 0,25
4,83
5,33
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140113
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 3