RFMD Datasheet Template

RFXF0007
1:1 SMT Transformer
45MHz to 1200MHz
Package: SP5
The RFXF0007 transformer is designed for applications that
require small, low cost and highly reliable surface mount
components. Applications may be found in broadband, wireless
and other communications systems. These units are built leadfree and RoHS compliant. S-Parameters are available on request.
Features
■
45MHz to 1200MHz Operation
■
Low Cost and RoHS Compliant
■
Industry Standard SMT Package
■
Available in Tape-and-Reel
■
75 Ω Characteristic Impedance
Applications
■
Broadband/CATV
■
Wireless
Functional Block Diagram
Ordering Information
RFXF0007SB
Sample bag with 5 pieces
RFXF0007SQ
Sample bag with 25 pieces
RFXF0007SR
13" Sample reel with 100 pieces
RFXF0007TR13
13" Reel with 1000 pieces
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
®
DS140228
®
RF MICRO DEVICES and RFMD are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 4
RFXF0007
Absolute Maximum Ratings
Parameter
Rating
Unit
2
W
Operating Temperature Range
-40 to +100
°C
Storage Temperature Range
-55 to +100
°C
RF Power
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Nominal Operating Parameters
Specification
Parameter
Unit
Min
Typ
General Performance
Operating Frequency Range
T=25°C
45
Insertion Loss
Input Return Loss
Amplitude Balance
Phase Balance
Impedance Ratio
Type – Transmission Line
Condition
Max
9
1200
MHz
0.4
0.6
dB
45 MHz to 100 MHz
0.5
0.7
dB
100 MHz to 600 MHz
0.6
1.0
dB
600 MHz to 1000 MHz
0.7
1.1
dB
1000 MHz to 1200 MHz
13
dB
1.4
2.0
dB
7
10
°
Nominal Phase Difference is 180°
1:1
Unbalanced to Balanced
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140228
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 4
RFXF0007
Typical Performance: T=25°C unless otherwise noted
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140228
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 4
RFXF0007
Package Outline, Pin Out and Branding Drawing (Dimensions in inches [millimeters])
Pin Names and Descriptions
Pin
Name
Description
1
PRIMARY DOT
2
PRIMARY
3
SECONDARY DOT
Output (Port 3)
4
SECONDARY
Output (Port 2)
Input (Port 1)
Ground
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or [email protected].
DS140228
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 4