RFFM5765Q Tested in Accordance with AEC-Q100 802.11b/g/n WiFi Front End Module Pdet VCC VCC N/C Package Style: QFN, 16-pin, 3mm x 3mm x 0.5mm 16 15 14 13 Tx In 1 12 N/C Features SP3T RX Out 3 10 ANT LNA_Vdd 4 Automotive WiFi WiFi Direct Automotive Diagnostics WiFi Infotainment 2.5GHz ISM Band Solutions Portable Battery-Powered Equipment 5 6 7 8 BT 9 Applications 11 GND 2fo Filter N/C Vreg 2 C_Rx Integrated 2.4GHz b/g/n Amplifier, LNA, SP3T Switch, and Power Detector Coupler Single Supply Voltage 3.0V to 4.8V POUT = 19dBm, 11g, OFDM at <4% EVM; 22dBm 11b ACPR < -33dBc C_BWRx C_BT Functional Block Diagram Product Description The RFFM5765Q provides a complete integrated solution in a single front end module (FEM) for automotive WiFi applications, 802.11b/g/n, and Bluetooth® systems. The ultra-small form factor and integrated matching greatly reduces the number of external components and layout area in the customer application. This simplifies the total front end solution by reducing the bill of materials, system footprint, and manufacturing cost. The RFFM5765Q integrates a 2.4GHz power amplifier (PA), low noise amplifier (LNA), power detector coupler for improved accuracy, and some filtering for harmonic rejection. The RFFM5765Q is capable of receiving WiFi and Bluetooth simultaneously and is tested in accordance with AEC-Q100 standard. The device is provided in a 3mm x 3mm x 0.5mm, 16-pin package. This module meets or exceeds the RF front end needs of IEEE 802.11b/g/n WiFi RF systems. Ordering Information RFFM5765QSQ Standard 25 piece bag RFFM5765QSR Standard 100 piece bag RFFM5765QTR7 Standard 2500 piece reel (13”) RFFM5765QPCBA-410 Fully Assembled Evaluation Board with 5-piece Sample RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2012, RF Micro Devices, Inc. DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 1 of 15 RFFM5765Q Absolute Maximum Ratings Parameter Rating Unit DC Supply Voltage (Continuous with No Damage) 6.0 V DC Supply Current 700 mA Case Operating Temperature -40 to +85 °C Storage Temperature -40 to +150 °C Maximum Tx Input Power into 50 Load for 11b/g/n (No Damage) +5 dBm Maximum Rx Input Power (No Damage) +5 dBm Moisture Sensitivity Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. RFMD Green: RoHS compliant per EU Directive 2002/95/EC, halogen free per IEC 61249-2-21, < 1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony in solder MSL2 Nominal Operating Parameters Parameter Min. Specification Typ. Max. Unit Condition 2.4GHz Transmit Parameters Compliance IEEE802.11b/g/n Standards, FCC CFG 15.247, .205, .209, EN, and JDEC Operating Conditions VCC = 3.0V to 4.2V; VREG = 3.0V to 3.2V; POUT(g/n) = 19dBm; Frequency 2412MHz to 2484MHz; Switch Control voltage: 3.0V to 3.6V; 11g 54Mbps and 11n MCS7 signals; Temp = -40°C to +85°C; Unless noted otherwise. Frequency 2.4 Voltage Supply 3.0 2.5 GHz 4.2 V Power Amplifier Voltage Supply (VCC) 3.1 3.2 V PA in “ON” state 0.00 0.20 V PA in “OFF” state 3.3 VREG Voltage ON 3.0 OFF Output Power 11g/n 11b 17 18.5 dBm VCC > 3.0V 18 19 dBm VCC > 3.3V 19 22 dBm 11Mbps CCK signal, VCC > = 3.3V EVM 3.3 4 % Adjacent Channel Power POUT(g/n) = Rated Output Power, 54Mbps OFDM, 50, see note 1 POUT(b) = 23dBm, 11Mbps CCK signal, VCC > = 3.3V, see note 4 ACP1 -36 -33 dBc +/- 11MHz Offset from carrier ACP2 -56 -53 dBc +/- 22MHz Offset from carrier 30 34.5 dB 4.2 V Gain 25.5 Gain Variation Slope Range At rated power and a given supply voltage 3.0 VCC (Average) VCC (Instantaneous) 0.5 dB/V 1 dB/V Frequency -0.5 +0.5 dB 2.4GHz to 2.5GHz Over Temperature -1.75 +1.75 dB VCC = 3.3V, VREG = 3.1V, Freq = 2.45GHz 2 of 15 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q Specification Min. Typ. Max. Unit 11g/n -9 dBm 11b -5 dBm Parameter Condition 2.4GHz Transmit Parameters (continued) Typical Input Power Power Detect Power Range 0 23 Voltage Range 0.1 1.5 Resistance 10 Capacitance dBm V k 10 pF 350 mV/dB 150 mA Sensitivity 0 < POUT < 6dBm 3 6 < POUT < 23dBm 8 mV/dB Current Consumption (ICC) Quiescent Current 110 Over VCC, and Temp range 11g/n 215 250 mA At rated power, over Freq, VCC, and Temp range 11b 260 340 mA At rated power, over Freq, VCC, and Temp range 5 mA VREG > 3.0V 2 10 A VCC = 4.8V, VREG = C_BT = C_RX = C_BWRX < 0.2V IREG VCC Leakage Current Input Port Impedance Input Port Return Loss 10 50 15 dB Ruggedness No Damage Conditions: max operating voltage, max input power, max temperature Output VSWR 10:1 Input Power -5 dBm Stability PA must be stable from 0dBm to 20dBm. No spurs above -41.25dBm for non-harmonic related signals. Output VSWR 6:1 CW signal, POUT = 20dBm, all phases Out-of-Band Emissions 2310MHz to 2390MHz and 2483.5MHz to 2500MHz (FCC restricted bands) -41.25 dBm/MHz POUT = 16.5dBm, 54Mbps OFDM Modulation, 64QAM, RBW = 1MHz, VBW = 100kHz, VCC = 3.3V, VREG = 3.1V, Note 4 -41.25 dBm/MHz POUT = 20.5dBm, 11Mbps CCK Modulation, BT = 0.45, RBW = 1MHz, VBW = 100kHz, VCC = 3.3V, VREG = 3.1V Harmonics 11b modulation, 1Mbps, BW = 1MHz, up to 3:1 load, POUT = 20dBm Second -23 dBm 4.80GHz to 5.00GHz Third -20 dBm 7.20GHz to 7.50GHz 1.0 s Turn-on/off Time DS121126 0.5 Output stable to within 90% of final gain, Note 1 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 3 of 15 RFFM5765Q Specification Min. Typ. Max. Parameter Unit Condition 2.4GHz Receive Parameters Compliance IEEE802.11b, IEEE802.11g/n, FCC CFG 15.247,.205,.209, EN, and JDEC Nominal Conditions VDD = 3.0V to 4.2V; Switch Control: 3.0V to 3.6V; Freq = 2412MHz to 2484MHz; CW signal; Temp = -40°C to +85°C; Unless noted otherwise Frequency 2.4 LNA Voltage Supply (LNA VCC) 3.0 LNA Current 2.5 GHz 3.3 4.2 V 16 18 mA LNA in “ON” state 5 A LNA in “OFF” state (C_RX = low, LNA VCC = ON) 0 LNA Input P1dB LNA VCC can be tied to VBATT at all times -10 -7 -4.5 dBm WiFi Rx Gain 13 18 21 dB WiFi Rx mode, VDD > = 3.3V Simultaneous WiFi/BT Rx Mode 9 13 16 dB WiFi Rx/BT Mode, LNA “ON”, VDD > = 3.3V 2.1 3.5 dB WiFi Rx mode (LNA “ON”) 3 4 dB WiFi Rx/BT Mode (LNA “ON”) Gain Noise Figure VCC > 3.3V, including switch WiFi Rx Simultaneous WiFi/BT Rx Mode Passband Ripple WiFi Rx Port Return Loss -0.2 +0.2 dB WiFi Rx Mode -0.5 +0.5 dB WiFi Rx/BT Mode 8.5 dB 5 dB Switch in WiFi Rx/Bluetooth Mode No external matching WiFi Rx Port Impedance 50 Bluetooth Parameters Frequency 2.4 2.5 GHz 1.2 1.5 dB Bluetooth mode 13 16 dB WiFi Rx/BT Mode, LNA “ON” Insertion Loss BT Tx/Rx only BT/WiFi Rx Gain (simultaneous mode) Passband Ripple 9 -0.2 +0.2 dB Bluetooth mode -0.5 +0.5 dB WiFi Rx/BT mode dB BT Mode, over temp, C_BT = 3.3V to 3.6V Input P1dB 27 30 Bluetooth Port Return Loss 8.5 dB Switch in Bluetooth Mode 6 dB Switch in WiFi Rx/Bluetooth Mode Other Requirements Antenna Port Impedance Output 50 Return Loss 10 dB Isolation Antenna to Receive 20 dB Antenna to Bluetooth 20 dB In Tx Mode (measured from ANT to BT port) Antenna to Receive 20 dB In Tx Mode (measured from ANT to Rx port) Switch Control Voltage C RX, C BT, and C BW Rx control lines Low High 4 of 15 In BT Mode (measured from ANT to Rx port) 1.7 0 0.2 V Switch is in the low state (L) 3.3 3.6 V Switch is in the high state (H) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q Parameter Specification Min. Typ. Max. Unit 2 10 A Per control line (C_BT, C_BWRX) 150 A Over VCC, Frequency and Temperature. 200 ns Condition Other Requirements (continued) Switch Control Current C_RX Current 100 Switch Control Speed Switch P1dB 28 dBm ESD Human Body Model Charge Device Model 500 V EIA/JESD22-114A RF pins 1000 V EIA/JESD22-114A DC pins 500 V JESD22-C101C all pins Note 1: The PA module must operate with gated bias voltage input at 1% to 99% duty cycle. Note 3: Values to be agreed to upon characterization data review: current, gain, return loss, detector sensitivity and output power. Note 4: The output power for channels 1 and 11 may be reduced to meet FCC restricted band requirements. Switch Control Logic VREG C_RX C_BT Standby Mode L L L C_BWRX L WiFi Tx H L L L WiFi Rx L H L L WiFi Rx/BT* L H L H BT Rx L L H L BT Tx L L H L *The FEM can be placed in receive WiFi and Bluetooth modes simultaneously with increased insertion loss. DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 5 of 15 RFFM5765Q Pin Names and Descriptions Pin 1 2 Name TX_IN VREG 3 4 5 6 7 8 9 10 11 12 13 14 15 16 RX_OUT LNA_VDD C_BWRX C RX N/C BT C_BT ANT GND N/C N/C VCC VCC PDET Description RF input for the PA. Input is matched to 50 and DC block is provided internally. Supply voltage for the bias control circuit, and the Tx control port of the SP3T which is also tied to this pin. An external bypass capacitor may be needed on the VREG line for decoupling purposes. Receive port output. Internally matched to 50. DC block provided internally. Supply voltage for the LNA. SPST switch control pin. (Simultaneous WiFi and BT receive.) See truth table for proper level. Receive switch control pin. See switch truth table for proper level. No connect. RF bidirectional port for Bluetooth. Input is matched to 50 and DC block is provided internally. Bluetooth switch control pin. See truth table for proper level. Port matched to 50 and is DC blocked internally. Ground. No connect. No connect. Supply voltage for the PA. Supply voltage for the PA. Power detector voltage for Tx section. PDET voltage varies with output power. May need external decoupling capacitor for noise bypassing. May need external circuitry to bring output voltage to desired level. PDET VCC VCC N/C Pin Out 16 15 14 13 TX_IN 1 12 N/C VREG 2 11 GND RX_OUT 3 10 ANT LNA_VDD 4 6 of 15 5 6 7 8 C_BWRX C_RX N/C BT 9 C_BT 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q Package Drawing DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 7 of 15 RFFM5765Q RFFM5765Q PCB Footprint and Stencil Recommendations 8 of 15 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q Application Schematic VREG VCC PDET C7 180pF NC C6 1µF 16 TX_IN RX_OUT 15 14 13 1 12 2 11 3 10 4 9 5 6 7 NC ANT 8 NC L1 1.1nH R1 5.6k C1 0.1µF LNA_VDD DS121126 C_BWRX C_RX BT C_BT 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 9 of 15 RFFM5765Q Theory of Operation The RFFM5765Q front end module (FEM) is designed for automotive WiFi applications in the 2.5GHz ISM band. It can be applied in many portable applications such as handsets, portable media players, and portable battery power equipment. This highly integrated module can be connected directly to the battery without additional voltage regulators. WiFi Transmit Mode The RFFM5765Q requires a single positive supply (VCC), a positive supply for switch controls, and a regulated supply for the VREG to maintain nominal bias current. The RFFM5765Q transmit path has a typical gain of 30dB from 2.4GHz to 2.5GHz, and delivers 19dBm typical output power under 54Mbps OFDM modulation and 22dBm under 1Mbps 11b modulation. The RFFM5765Q contains basic filter components to produce a bandpass response for the transmit path. Due to space constraints inside the module, filtering is limited to a few resonant poles and additional filters may be required depending upon the enduser’s application. While in transmit mode, the active components are the power amplifier (PA) and the Tx branch of the SP3T switch. Refer to the logic control table for proper settings. Tx Biasing Instructions • Connect the Tx input (pin-1) to a signal generator and a spectrum analyzer at the antenna output (pin-10) • Set VCC to 3.3V with VREG set to 0V • Turn VREG ON and set voltage to 3.1V. VREG controls the current drawn by the PA and it should quickly reach a quiescent current of approximately 110mA ± 20mA. Care must be exercised not to exceed 3.5V on the VREG pin or the part may be damaged. • Control bias to the transmit branch of the SP3T switch is tied directly to VREG • The SP3T controls for the off branches (C_RX and C_BT) must be set to a logic “low” (0.2V max) or grounded. In the event that one of these branches is left floating or in a logic “high” the performance of the PA will degrade significantly. Likewise, unused RF ports must be terminated in 50Ω to simulate actual system conditions and prevent RF signals from coupling back to the PA. • Turn RF ON WiFi Receive Mode Within the frequency band of operation 2.4GHz to 2.5GHz, the RFFM5765Q WiFi receive path has a typical gain of 18dB and a NF of 2.1dB with about 10mA of current. In Rx mode, only the Rx branch of the SP3T and the LNA are active. Refer to the logic control table for proper settings. Rx Biasing Instructions • Connect the Rx input (ANT/pin-10) to a signal generator and a spectrum analyzer at the Rx output (pin-3). A VNA may be used as well. • Turn the LNA bias ON (pin-4) and set the voltage to 3.3V. • Set C_RX (pin-6) high. This turns ON the receive branch of the SP3T. • The SP3T controls for the off branches (VREG and C_BT) must be set to a logic “low” (0.2V max) or grounded. In the event that one of these branches is left floating or in a logic “high” the performance will degrade. It is recommended to terminate unused RF ports in 50Ω. • Set the control bias for the SPST switch (C_BWRX/pin-5) “low” during WiFi Rx only mode. • Turn RF ON. 10 of 15 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q WiFi and Bluetooth Receive (Simultaneous Mode) The RFFM5765Q WiFi and Bluetooth receive circuits were specifically designed to address issues of simultaneous operation. In this mode both signals can be received at the same time when the C_BWRX (pin-5) is set high. The typical gain for each RF path is approximately 13dB and a NF of 3dB. During simultaneous mode the active components are the LNA, the SPST switch, and only the Rx branch of the SP3T. Refer to the logic control table for proper settings. Simultaneous Mode Biasing Instructions • Connect the RF input (ANT/pin-10) to a signal generator and a spectrum analyzer at the Rx (pin-3) and BT (pin-8) RF ports. A multiport VNA may be used as well. • Turn the LNA bias ON (pin-4) and set the voltage to 3.3V. • Set C_RX and C_BWRX high. This turns ON the receive branch of the SP3T and the SPST switch. • The SP3T controls for the off branches (VREG and C_BT) must be set to a logic “low” (0.2V max) or grounded. In the event that one of these branches is left floating or in a logic “high” the performance will degrade. It is recommended to terminate unused RF Ports in 50Ω. • Turn RF ON. Bluetooth Mode The RFFM5765Q Bluetooth only mode is implemented through the SP3T switch by setting C_BT “high.” Typical insertion loss is about 1.2dB. Bluetooth Biasing Instructions • Connect the RF input (ANT/pin-10) to a signal generator and a spectrum analyzer at the BT RF port. A VNA may be used in place of the Sig Gen and SA. • Set C_BT (pin-9) “high.” This turns the Bluetooth branch of the SP3T switch ON. • The SP3T controls for the off branches (VREG and C_RX) must be set to a logic “low” (0.2V max) or grounded. Do not leave floating. • Terminate unused RF Ports in 50Ω. • Turn RF ON. Application Circuit and Layout Recommendations The RFFM5765Q integrates the matching networks and DC blocking capacitors for all RF ports. This greatly reduces the number of external components and layout area needed to implement this FEM. Typically only a total of four external components are required to achieve nominal performance. However, depending on board layout and the many noise signals that could potentially couple to the RFFM5765Q, additional bypassing capacitors may be required to properly filter out unwanted signals that might degrade performance. The LNA bias components consist of an inductor and a decoupling capacitor. The inductor value is critical to optimize NF and return loss at the Rx output. For best performance and trade off between critical parameters such as NF, Gain, and IP3, the total inductance including board trace should be approximately 1.2nH. The 5.6kΩ series resistor for the Bluetooth control line helps to prevent unwanted signal from coupling to this pin. The resistor should be place as close as possible to the package pin. The last component needed in the application circuit is a low frequency bypass capacitor on the VCC line. In general, it is good RF practice to have proper decoupling of supply lines to filter out noise. Occasionally, depending on the level of coupling or parasitics of the board, a high frequency bypass capacitor must be added as well. In order to optimize performance for both the transmit and receive paths, a good layout design must be implemented. In addition to designing 50 RF lines, proper grounding along the RF traces and on the FEM ground slug must be exercised. This will minimize coupling and provide good thermal dissipation when the PA is operating at high power. For reference, the RFMD evaluation board uses 9 thermal ground vias (hole/capture pad 12/22mil) on the ground slug. Additionally, if space permitted, VCC and control lines must be isolated from each other with ground vias in between them. RFMD evaluation board gerbers are available upon request. DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 11 of 15 RFFM5765Q RFFM5765Q Transmit Performance Plots RFFM5765Q:GainversusOutputPowerversusTemperature (VCC =3.3V;VREG =3.1V;OFDM64QAM54Mbps;Frequency=2447MHz) RFFM5765Q:EVMversusOutputPowerversus Temperature (VCC =3.3V;VREG =3.1V;OFDM64QAM54Mbps;Frequency=2447MHz) 8 40 7 35 6 GĂŝŶ(Ě) EVM(%) 5 4 3 30 25 2 20 40C 40C +25C +25C 1 +85C +85C 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 15 22 0 2 4 6 8 10 12 14 16 18 20 22 OutputPower(dBm) OutputPower(dBm) RFFM5765Q:ACP1versusOutputPowerversusTemperature (VCC =3.3V;VREG =2.85V;Frequency=2450MHz;11b1Mbps) RFFM5765Q:OperatingCurrentversusOutputPowerversusTemperature (VCC =3.3V;VREG =3.1V;OFDM64QAM54Mbps;Frequency=2447MHz) 0.35 20 25 0.3 30 ACP1(dBc) ICC () 0.25 0.2 35 40 45 0.15 50 40C 0.1 40C +25C +25C 55 +85C 0.05 0 2 4 6 8 10 12 14 OutputPower(dBm) 12 of 15 16 18 20 +85C 22 60 12 16 20 24 OutputPower(dBm) 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q RFFM5765Q Transmit Performance Plots (continued) RFFM5765Q:SecondHarmonicversusOutputPowerversusTemperature (VCC =3.3V;VREG =3.1V;Frequency=2447MHz;11b1Mbps) RFFM5765Q:ACP2versusOutputPowerversusTemperature (VCC =3.3V;VREG =3.1V;Frequency=2447MHz;11b1Mbps) 15 40 45 20 50 H2(dBm) ACP2(dBc) 25 55 60 30 65 35 70 40C 40C 40 +25C 75 +25C +85C 80 12 16 20 +85C 45 24 16 17 18 19 OutputPower(dBm) 20 21 22 23 24 25 OutputPower(dBm) RFFM5765Q:ThirdHarmonicversusOutputPowerversusTemperature (VCC =3.3V;VREG =3.1V;Frequency=2447MHz;11b1Mbps) 10 15 20 H3(dBm) 25 30 35 40 40C +25C 45 +85C 50 16 17 18 19 20 21 22 23 24 25 OutputPower(dBm) DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 13 of 15 RFFM5765Q RFFM5765Q Receive Performance Plots RFFM5765Q:WiFIReceiverOperatingCurrent (LNAVDD =3.3V;C_RX=3.3V) 25 20 22.5 17.5 20 15 Current(mA) Gain(dB) RFFM5765Q:WiFiReceiverGain (LNAVDD =3.3V;C_RX=3.3V) 17.5 12.5 10 15 40C 12.5 40C 7.5 +25C +25C +85C 10 2380 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 +85C 5 2380 2500 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Frequency(MHz) Frequency(MHz) RFFM5765Q:WiFiReceiverNoiseFigure (LNAVDD =3.3V;C_RX=3.3V) 4 3.5 3 NF(dB) 2.5 2 1.5 1 40C +25C 0.5 0 2412 +85C 2447 2484 Frequency(MHz) 14 of 15 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. DS121126 RFFM5765Q RFFM5765Q Receive Performance Plots (continued) RFFM5765Q:BluetoothInsertionLoss (C_BT=3.3V) RFFM5765Q:WiFiSharedRdžGain (LNAVDD =3.3V;C_RX=3.3V;C_BWRX=3.3V) 0 20 0.2 17.5 0.4 15 12.5 0.8 Gain(dB) BTIL(dB) 0.6 1 1.2 10 7.5 1.4 5 1.6 +25C 1.8 2 2380 40C 40C +25C 2.5 +85C +85C 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 0 2380 2500 2390 2400 2410 2420 Frequency(MHz) 2430 2440 2450 2460 2470 2480 2490 2500 Frequency(MHz) RFFM5765Q:WiFiSharedBTGain (LNAVDD =3.3V;C_RX=3.3V;C_BWRX=3.3V) 20 17.5 15 Gain(dB) 12.5 10 7.5 5 40C +25C 2.5 0 2380 +85C 2390 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Frequency(MHz) DS121126 7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical support, contact RFMD at (+1) 336-678-5570 or [email protected]. 15 of 15