3 LED Module (30 modules / string) OVM12F3x7 Series 1 string Length: 160 inches Contains 30 modules Product Photo Here Unit Price = 1 module UL File E339817 The OVM12F3x7 is a versatile string of 30 LED modules for surface illumination creating decorative, special effects or channel letter applications. Response time is fast for instantaneous flashing lights and power consumption results in low power requirements from circuit power supply. Decorative applications include boats & motorcycles, boat houses & docks, residential under counter lighting & hidden ceiling lights, safety lights around steps and pools are just a few places to create an environment for fun and emotional moods. Applications Mood-setting decoration and landscape lighting Special decorative interior/exterior lighting Special effects stage lighting Part Number Color OVM12F3R7 Beam Angle Channel Letters & Signs Large Area Back-lighting High-lighting pedestrian and walkway areas Dominant Wavelength or CCT Illumination ([email protected]) typ Red 623 +/- 3 nm 20 OVM12F3Y7 Yellow 590 +/- 3 nm 18 OVM12F3G7 Green 525 +/- 5 nm 14 OVM12F3B7 Blue 470 +/- 5 nm 6 OVM12F3W7 White 5000 to 7000 K 16 120° IP Rating Housing Material Wire Gauge 67 ABS AWG 20 MAXIMUM RECOMMENDED MOUNTING HOLE DRILL SPACING RoHS DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue E 04/2014 Page 1 of 2 3 LED Module (30 modules / string) Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +80 °C Operating Temperature Range -30 ~ +50 °C Input Voltage 15 V Power Dissipation 1.5 W 125 oC LED Junction Temperature Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C Notes: 1. Lead Solder time less than 10 seconds at temperature extreme. 2. No Heat sink is required if the string is operated at ambient temperature < 35°C. For long term performance the drive voltage at 12 V is recommended. Please contact an Optek sales representative for more information on recommended drive conditions. Electrical & Mechanical Characteristics / module (TA = 25o C unless otherwise noted) SYMBOL Notes MIN Power Consumption Red/Yellow Green/Blue/White VDC Input Voltage Net Weight TYP MAX UNITS CONDITIONS 0.5 0.3 --- W VDC = 12 V --- 12 --- V --- 16 --- g Per module ---- deg VDC = 12 V λD Dominant Wavelength --- See chart 2 Θ½ 50% Power Angle ---- 120 If an entire string is not required for the application, clip wires at mid-span: Modules can be secured onto a mounting surface with two #6 screws. Modules are waterproof and can be used outdoors. The installer is responsible for waterproofing the connection to the power source. The installer is also responsible for the use of an exterior approved power source. Package Information: 1 tray contains 2 strings of 30 modules each. Modules are packaged 60 per tray. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue E 04/2014 Page 2 of 2 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com